I took your MixPre course which was fantastic. I imagine for F6 owners this would be priceless.

@LearnLightAndSoundSessions

4 жыл бұрын

Thanks Kevin!

@JensChrStrandos

3 жыл бұрын

I took the F6 course - it was fantastic too:-) He's an excellent teacher.

Two things. First, I bought the F6 and freaking love it. Up until this point I've been using either the Zoom H4N or recording directly into the camera (BMPCC4K, GH5S). I notice a substantial increase in overall quality with the F6. Second, I enrolled in this course...haven't finished it yet, but so much good knowledge. I love how you explain things Curtis, there's no BS, no fluff, no "look at me I'm a youtuber!!!"....you just tell us what we're here for and you do it professionally.

@curtisjudd

3 жыл бұрын

Thanks so much, Driven Films! Happy recording to you!

I've been wanting to get the F6 for some time, especially after seeing your review on it. Now that you're offering a course on how to use it, I'm even more inspired. Thanks, Curtis.

@LearnLightAndSoundSessions

4 жыл бұрын

Thanks Todd. One thing which I discovered after the review is that the F6 does have issues providing a clean feed of audio to consumer cameras with 3.5mm mic inputs (unless like the Panasonic GH5S, they also support line level). So that is one thing to beware of it you were considering the F6. That is a case where the MixPre is better off.

Your content is fantastic! I've been watching for a long time and have gotten a lot from your videos. I've never bought a KZreadrs course before because there is usually so much free information online. I bought this course just now, partly because i'm sure it will be helpful and partly just to say thank you for all the free content you put online. All the best..

@LearnLightAndSoundSessions

4 жыл бұрын

Thank you Richard!

@jnoble123

3 жыл бұрын

@@LearnLightAndSoundSessions I had a similar reaction when I just now went to sign up for one of your courses. A couple of days ago I purchased a RodeCaster Pro after doing a lot of research including listening to your comments/updates/posts about it. In fact you were the deciding voice that triggered me purchasing it. So I went looking for your paid course on it........ I couldn't find it so if it exists please share the link (and if it doesn't please nudge me again when you make it) - Thanks again for all your help! ~Jamie N

@curtisjudd

3 жыл бұрын

@@jnoble123 Hi Jamie, I don't yet have a paid course, but do have these two videos on how to set the compressor and noise gate: Compressor: kzread.info/dash/bejne/dK1szcF-aMWsido.html Noise Gate: kzread.info/dash/bejne/q51_25ielsebk7A.html

I'm starting my own sound/audio and video company and your tutorials are gold!!! Very easily digested and easily learned. Thanks for the helpful curriculum

@curtisjudd

3 жыл бұрын

Thanks Richard and best wishes on your new company.

Just recently got the F6 (thanks to your helpful reviews). Looking forward to sign up asap!

@LearnLightAndSoundSessions

4 жыл бұрын

Congrats on the new recorder and I hope the course helps get you up and running quickly!

I'm in! Thanks for this, Curtis. Mine has been sitting in a box since it arrived.

@LearnLightAndSoundSessions

4 жыл бұрын

Thanks Kippur Kippur - hope you find it helpful!

Finally! I've been waiting for this course ... maybe a six months :) Do you have experience Audio Technica microphone BP40? I would like to try a dynamic microphone for radio play and audiobook. I will join the course tomorrow!

@curtisjudd

4 жыл бұрын

Hi Antti, I do not have experience with the BP40 but should work nicely with the F6. Best wishes!

I registered as soon as I received the e-mail! ;-)

@curtisjudd

4 жыл бұрын

I hope you find it useful!

I'm still on the fence as to whether or not I need a field recorder, but this one would be in strong consideration if I go that way. I have taken one of Curtis' audio courses and highly recommend any of his courses for those seeking well presented knowledge, aimed toward practical application.

@curtisjudd

3 жыл бұрын

Thanks Justin, so glad to hear you found the course helpful!

Very Nice course, I'm an experienced audio guy and I got some things out of it, but even more I like to support the authors efforts. I'm hopeful that Zoom will come up with a fix for mismatched line out with dslr and mirror less cameras that only have a mic level in. Perhaps a Sacom attenuation cable would help but not sure how much it would color the audio Also two other things I'm disappointed in that the audio interface for the ios and stereo record is only 16 bit audio. Yet the multichannel is 24 bit so I am not sure why they limited it to 16 bit, when i record to my Ipad I like 24 bit audio. Keep up the good work.

Hi Curtis, I'm looking forward to your course! One question, though: I'm used to working with wireless transmitters on my boom (MKH416 with Rode RODELink Newsshooter Kit) and lavs on talents (Sennheiser AVX). When using these wireless systems with the F6, is 32-bit float recording usefull?

@curtisjudd

3 жыл бұрын

Hi Hans, the wireless system will impose the dynamic range limit in your signal chain. That's not a deal-breaker, from my point of view, but technically, they won't be putting the possible range of the F6 to use. Still, the F6 is a pretty good recorder. 😀

I read the title as "new curse announcement" and I was like, "NOT NOW, 2020!"

@LearnLightAndSoundSessions

4 жыл бұрын

Hahahaha! Thankfully, this is hopefully an anti-curse for some people. 🤓

I was on the fence for buying this vs a MixPre. Settled on the MixPre and bought your course. Emails for help will be coming all weekend. I’m not as smart as I thought I was.

@LearnLightAndSoundSessions

4 жыл бұрын

Looking forward to your emails!

I just recently purchased a zoom F6, despite a bad experience years ago with their H4. I'm pleased with the 32bit recording & getting used to being "OK" to have peaks at +3 dBFS, but DaVinci Resolve Studio does not like 32 bit float files, esp if they exceed 0 dBFS. What's the best workflow to take wide dynamic range 32bit into Resolve?

@curtisjudd

4 жыл бұрын

Hi ef basham, the latest version of Resolve handles 32-bit float audio clips and processes them correctly. You can simply pull down the levels to recover any 0dBFS overruns. The only thing it does not do yet is correctly draw the waveforms for 32-bit float clips. I have to imagine that's coming soon. The following DAWs will handle 32-bit float: Audacity, Audition, Pro Tools, and likely some of the other music oriented DAWs. Logic Pro X does not support 32-bit float. Best wishes!

Hi Curtis, i bought the f6 course. You saved me! Now, here is something that just can’t understand... I have the Beringher Xair 18 which is a digital mixer with 6 Aux Sends (6 bus). I created mixes for each Aux sends and wanted to connect each XAir Aux Sends to one of the 6 f6 inputs so i could have 32 bit float multitrack. While it does work, the noise floor is unusable even if everything muted. The simple fact of connecting aux sends to the zoom f6 creates noise. What am i doing wrong?

@curtisjudd

3 жыл бұрын

Hi Megapixelers, I assume you changed each input on the F6 to line level?

@Megapixelers

3 жыл бұрын

@@curtisjudd Hi Curtis, Yes I did. Is it expected that AUX Sends will be less clean than Main Out's?

@LearnLightAndSoundSessions

3 жыл бұрын

@@Megapixelers I don't have any first-hand experience with the X-Air mixers to know that. I guess I'd work through the signal chain to figure out where the noise is contributed. So I suppose swap in another recorder to the X-Air outputs and see if it is still noisy? Swap out cables - though if all 6 are noisy, this is likely not the case. Etc.

love this channel! I am not an audio guy at all! LOL I am a director but audio is sooo hard! So I am determined to educate myself on the subject! I am producing a nature project .... is the F6 a good choice for it...? thanks !

@curtisjudd

3 жыл бұрын

It is pretty good. I personally prefer the Sound Devices MixPre line, but the F6 can do the job as well.

got my F6 lately...just enrolled into the course...Gotta go .

@curtisjudd

3 жыл бұрын

Congratulations, thanks, and happy recording!

yeeeees, thx :)))

@LearnLightAndSoundSessions

4 жыл бұрын

👍

I am eyeing to purchase one. Has the line out noise issue already been solved by the company mr. Judd?

@curtisjudd

4 жыл бұрын

Hi Dimas, Randy Patria, no, the line out issue is not solved, even with the v1.50 firmware. I am not sure it can be solved with a Firmware update, but I have reported it recently to Zoom and sent sample files for their evaluation. In the meantime, it is not ideal, but one can use the headphone output to feed audio to cameras with 3.5mm microphone inputs. And for cameras which have the ability to switch their input to line level, the F6's line output works fine (e.g., Panasonic GH5S). Best wishes!

@dimasrandypatria7135

4 жыл бұрын

Pardon me@@curtisjudd. But I don't quite get it. So, I should lower my audio record level on my a6400 to match the line out level with the lower microphone level to be able to use the f6's line out? And since my a6400 doesn't have a headphone jack, I am hoping to use both output for monitoring and as a backup recorder/sync guide. The line out noise issue will be my deciding factor between Zoom F6 and Tascam Dr-701d. Thanks a lot anyway.

@dimasrandypatria7135

4 жыл бұрын

Ahh.. nevermind.. I will choose the Zoom F6 anyway.. regardless the issue.. It is waaaayy better than Dr-701d and it is the best bang for buck nowadays..

@LearnLightAndSoundSessions

4 жыл бұрын

Best wishes!