I have watched so many of these set up vids trying to figure out what to do to set up and fly my first plane. This is the first vid that has left me with a sense of hope that I may be able to make more then a first and last flight all in the same moment. Everyone wish my dart sub250 good luck. Thank you Mr. Newton. 62 years old and ready for my new adventure.

@AndrewNewton

Жыл бұрын

Never too old for flying

Prob the best money spent on a stabiliser. RECOMMEND. Went from crashing every 5 mins to not crashing at all. Can't learn to fly if you break something every 5 mins. Get a bit loose just flick the switch and go again. Brilliant

great to see the launch mode , was wondering if throttle was needed, im glad you tried it . thanks for all the videos ! a real help to anyone trying to build a model

I like this autopilot system, especially the RTH launch and auto throttle power up when , throwing the plane on take off . Another very helpful review ! Thank you Andrew !

I am about to install the kopilot in my ZOHD Dart Extreme. I had a few questions after reading the manual and you have answered all of them. Thanks.

@MrModelflyer

4 жыл бұрын

Jeff Jenken how did you connect all servo leads to Kopilot. Did you use Y lead to connect both leads from each wing?

Several videos on the kopilot but until I came across yours could not succeed. Now working /flying GREAT. GREAT WORK and thumbs thumbs thumbs UP!!!

@AndrewNewton

2 жыл бұрын

Great to hear, thanks

Of course you have done a set up video for this! Excellent as well! Cheers Andrew.

That launch assist would do wonders for my ego. I'd look like I know what I'm doing !

@AndrewNewton

4 жыл бұрын

Haha, hands off, wave to the crowd

Благодаря са прекрасното видео.Радвам се,че помагате на хората за новостите в нашето хобито.Бъдете здрав!

@AndrewNewton

2 жыл бұрын

My pleasure, thanks

Great stuff. I have just ordered it and will put it into one of my trainers.

WOW this is awesome, might have to pick one up. Thanks for sharing!

Love the auto stuff , auto home etc works well

Thank you! For all your efforts in testing. It is really appreciated.

@AndrewNewton

4 жыл бұрын

My pleasure

Too cool, i have that in my cart for the skyhunter and sonic AR 900mm, thanks!

Excellent tutorial thanks Andrew... 🏴󠁧󠁢󠁷󠁬󠁳󠁿✈️

Looks a nice bit of kit. Think a couple of my mates may be trying this.

Thanks Andrew, another great video. 😀

finally someone who does not assume anything for his viewers and takes it step by step! i have been flying drones for years but have had so much trouble setting this kopilot system correct! thanks so much andrew! nice video good info!!

@AndrewNewton

3 жыл бұрын

Thanks, it's a very tricky video to make.

Hi Andrew, I have a kopilot and was having trouble working it out, so thanks again for taking the time to do the video as it has helped me to get it sorted, good one mate, Andy Smith...

@AndrewNewton

4 жыл бұрын

Excellent, glad I could help

I love the launch mode.

@rueda82nd

4 жыл бұрын

One main reason i'm getting it

Thank you so much man you’re the only person that’s done the review of this that has given me the information I need thank you I’m definitely getting this

@AndrewNewton

2 жыл бұрын

My pleasure!

Best Kopilot video I've seen. Thanks.

@AndrewNewton

4 жыл бұрын

Thanks Bernie. Not easy to demo this stuff in a simple way

Hi Andrew..... fitted the Kopilot Lite System to my volantex ranger 1600 and it`s working a treat... thank you for the help ;)

@AndrewNewton

4 жыл бұрын

My pleasure, it is a simple system

Nice walk through! 😃

Nice one Andrew, the best explanation on KZread. Regards, Pete

@AndrewNewton

4 жыл бұрын

Thanks Peter. I like to keep it simple and clear.

Thank you for this !

Thanks, learned a lot here, mine came without instructions so I've struggled. This has ironed out a few things for me.

@AndrewNewton

3 жыл бұрын

There are traps. ESCs can be a pain with flight control boards

Great Video!!! I have just installed this in my FPV Scout Plane and am Excited about getting it in the air. This video Inspired even more.!!!!

@AndrewNewton

Жыл бұрын

Excellent. Good luck with the Scout.

Thanks for this one!

Dooood . SOLD . i wasn't going to buy anything for a while but after watching your vid i bought one for my Rander2000 :) you do the best vids. Keep it up . Thankyou.

@AndrewNewton

4 жыл бұрын

Thanks Jimmy

great video of how it all works Andrew....installing mine on a flying wing as we speak.....got it all set up thanks to your explanation.....will post a video of how it ends up...thanks once again.

@AndrewNewton

4 жыл бұрын

That's what I like to hear. It can be frustrating

Another very helpful review ! Thanks

@AndrewNewton

2 жыл бұрын

Glad it was helpful!

Greetings from Shetland again Andrew, thanks for that video. Sorely tempted to get a fixed wing again. I used to have an ardupilot setup but this is soo much simpler, cheaper and smaller. Really appreciate the walkthrough.

@AndrewNewton

2 жыл бұрын

Hey Nick. Yes the Kopilots are pretty simple and work well. We have recently moved to a coastal town and now see whales, seals and dolphins daily. Not quite the Shetlands but still excellent.

@southspearmedia

2 жыл бұрын

@@AndrewNewton I look forward to seeing what you capture! Got a swim with a Basking Shark in poor viz 2 weeks ago...I'll confess it spooked me a little 🤣

great video. thanks for showing n sharing

Hi Andrew, Great videos on the Kopilot. I have one successful model using it. By accident I learned my “lowly” Orange R615X receiver’s default Failsafe setting is the “Preset” mode..! Thus, when setting up the Rx failsafe to RTH mode, the low cost 615X handles the return to home perfectly. Cheers....

@AndrewNewton

2 жыл бұрын

Well done. Yes preset is the only option for a lot of receivers

Thanks for Magnificent video ...

Awesome tutorial Andrew. Thanks for taking the time to explain this so clearly. Much appreciated

@Billbobaker

4 жыл бұрын

He does do such amazing thorough no Hype reviews.. much like Painless360..

@beefybeef1326

4 жыл бұрын

@@Billbobaker I agree. They are both my ' go to' rc channels and learned alot from both of them

@mickelson8332

4 жыл бұрын

@@beefybeef1326 agreed, both are a font of knowledge

Thank you. I think I will stick to the FrSky S6R then.

Very nice tutorial Andrew!

@AndrewNewton

3 жыл бұрын

Many thanks!

Andrew, top marks for finding the launch assist mode, non of the other testers mentioned that very handy feature on this, will be great in my mini skyhunter, the gains work in the same way as an eagletree guardian, turn for correct stab direction

@AndrewNewton

4 жыл бұрын

Yes is only gets an obscure mention in the marketing. More operation detail would make life easier.

@marshal7102

Жыл бұрын

Agreed Also the first one I have ran across that showed ALL the functions in Action especially RTL. That was great!!!!

Thank you.

Um amigo meu instalou uma coisa destas e funciona muito bem. Um sucesso!

@AndrewNewton

4 жыл бұрын

Excellent to hear!

@JoseSantos-lx8cs

4 жыл бұрын

@@AndrewNewton UAU. Did you understand portuguese. Bravo.

I'm using Radix Brain Flight Controller and Black Sheep GPS if I knew this was out I would have bought it before my flight controller, This looks much easier than my setup ! But now tempted to buy this on another Wing build.

I find these a bit troubling to properly set up and like a more hands on me only flying style.. But a return to home FPV is freaking amazing cool.

Fantastic video Andrew, best review I have seen on the Kopilot Lite, I am really impressed with how well it works in the Ranger G2 most of the videos I have watched featuring the Kopilot Lite the gains or throws have been too high and the plane or wing has had a fair amount of shake when stabilized. Really curious how it will perform in the lighter Dart 250 as I have one on the way, you may just save me some headaches. Thanks again always informative and a great source of inspiration, Cheers from the cold, rainy, snowing Midwest USA!

@AndrewNewton

4 жыл бұрын

Thanks Keith. The Dart 250G + Kopilot video will be up tomorrow. Stabilisation gains do need to be dialled back a lot for the little Dart. Editing up a tweaking video right now.

Oh boy you're braver than me. Everything works with my kopilot but I haven't done fence mode yet and I haven't turned off my radio. It has saved my butt so many times. I just did my first rolls today with no assist. And loops. I lose video when I'm upside down.

Andrew, very nice review indeed. Couple of points that are worth noting. 1) As with most stabs of this kind you do not need to use a Y lead on the ailerons. You can use (say) channel 5 or 6 direct from the receiver for the second aileron. The KoPilot will only stabilise one aileron but this is perfectly adequate for most models. I have used it with other stabs which do not have internal mixing for dual ailerons. It also works with my Kopilot. 2) I'm sure the 70ft RTH height is not AGL but Above launch point height. There is no way the Kopilot can allow for changes in ground level without a radio altimeter or internal terrain map so you might run into trouble if you expect it to work in hilly terrain. John

@AndrewNewton

4 жыл бұрын

Thanks, great info,

Good video!

@AndrewNewton

3 жыл бұрын

None shall crash!

i got to get me a couple of these for my FPV expierence.

Just recieved mine :D

appreciate the video. I was about to put my kopilot board in my old crashtesthobby wing, now i dont have to read the manual :)

@AndrewNewton

4 жыл бұрын

The manual is kind of confusing.

@thenatedog

4 жыл бұрын

@@AndrewNewton strange that your the first person to mention the launch mode. That's awesome though.

Excellent demo! Would like to see the vc400 install demo.

@AndrewNewton

4 жыл бұрын

Next video

Dam your videos are so good I can see you are making me spend a lot of money lol

I wound up setting the gain for the elevator at the maximum and the aileron gain about half and the stabilizer works perfectly.

@joenaylor34

4 жыл бұрын

That's on a ZOHD Nano Talon Black Ops.

@AndrewNewton

4 жыл бұрын

Good info thanks Joe. I had to dial everything right down to minimum for the Talon 250

Pilots have been asking for a simple FC with RTH for years. Now there are several options out there including this one. The interesting thing about the Painless 360 review of this FC is there is no mention of the Launch feature. That option is a huge plus on this FC.

@AndrewNewton

4 жыл бұрын

Finally I knew something Lee didn't. I usually have to watch his videos before I know what I'm doing.

Actually been witing on a decent review of the Kopilot since its release earlier this year. Looks great for long range when you don't want to use a Pixhawk or Inav. Hmmm looking forward to you getting into Ardupilot. I do remember you saying about autopilots "there interesting but I dont really need them." I think that still stands true but they can be helpful.

@AndrewNewton

4 жыл бұрын

As my buddy MADRC says "Dont leave home without one"

@atw98

4 жыл бұрын

@@AndrewNewton So you found it's really good? Seems it replaces stuff that 5 years old and alot cheaper.

Nice Small Lil Kit & Great Explaining How It All Works... Thanks Mate That Would Be Great On A Big Wing Like My Opterra 2.1m So As Not To Chop Your Hand Off While Launchin It! LOL

I knew nothing about these GPS gyro RTH / stabilisation modules and that was a very useful video. Good to see you use the Firefly 8S 090 lens for videoing, I use the same for the RC video on my channel. Only 5K subscribers so far , a way to go to catch you!

@AndrewNewton

4 жыл бұрын

Glad to hear it Bob, I am one of your 5K. You deserve more.

@bobflyman

4 жыл бұрын

@@AndrewNewton Hey, thanks. I'm flattered!

@bobflyman

4 жыл бұрын

​@@AndrewNewton You make good clear presentations without any waffle. Good work!

@AndrewNewton

4 жыл бұрын

Thanks Bob, I'm no good at waffle and padding

Thanks,helpful vid. I'm beginner so I learn a lot from your videos. This autopilot system will with work with my Flysky FS i6 radio?

@AndrewNewton

4 жыл бұрын

Yes, perfect radio for it.

Great review mate. Looks like a winner and something that will be a blessing for Deltas with "bigass props", not a bad price either considering what you get. Is there any way to Adjust the RTL Height at all?

@AndrewNewton

4 жыл бұрын

No that's all fixed

Very nice big fan love from india

@AndrewNewton

4 жыл бұрын

Greetings to India

Hey Andrew, thanks for the great videos! How does throttle work during RTH? When in RTH mode, can you modulate the throttle? What about when the receiver goes into failsafe . . . do it use your failsafe throttle setting, or hold the last known throttle setting but switch to RTH?

@AndrewNewton

4 жыл бұрын

Kopilot takes control of throttle so you dont set it in failsafe. Something like 50% it seems.

@MatthewHeiskell

4 жыл бұрын

@@AndrewNewton Thank you :) Your videos are like a library of RC info!

Thanks for an interesting and informative video, I have watched it several times. I have ordered a Kopilot and currently awaiting it's delivery. As you mentioned that it could be used with the FlySky i6 system a video of the setup for this would be good. My 6B r/x has both IBus and SBus so that should work out OK. Once set up using 100% throws can you then setup hi and lo rates in the t/x?

@AndrewNewton

3 жыл бұрын

Yes that would be the best way Robert. 50% for manual and 100% for stabilised.

Hi Andrew, Thanks for putting up this lovely detailed presentation on ZOHD. Great Job! I have a quick question before I place the order, How do we connected two Ailerons that are controlled by two independent servos? Do we need a Y cable or the board supports two servos for Ailerons.

@AndrewNewton

2 жыл бұрын

Must use a Y lead for ailerons with the Kopilot

Hi andrew. I finally got to fly using this unit. It really is awsome. It would be great if RTH and FENCE mode were on a switch on my transmitter. I'm wondering if you could use a buddy box with this setup? Would be great to help beginners.

@AndrewNewton

4 жыл бұрын

Buddy box is more a transmitter function so it should work.

Andy, yet again another great demo. I assume that ailerons would have to go through y lead so they utilise one channe on the board. I currently have them on ch 1 and 6 so I can mix them for flaps.

@AndrewNewton

4 жыл бұрын

That's right Y-lead required for this

@mickelson8332

4 жыл бұрын

@@AndrewNewton after everything I've learnt from all your mixes and here I am about to buy a new gadget only to remove them lol

Dear Andrew, this FC Is cool. This little auto pilot seem a rebrand of the sn Sparrow with an external board for gain/rth/radius fence potentiometer. But 10€ more expensive. the funny thing is i fly it on my ranger G2. The only feature i nées to try to confirm the cloning is the autolaunch in RTH mode. I must warn you about the throttle handling on windy day. The auto pilot doesn't compute airspeed from gps speed ans throttle like ardupilot, i loose a lot of altitude in RTH on windy day. Awesome review as usual.

@AndrewNewton

4 жыл бұрын

Thanks for the throttle tip

G'day Andrew Thanks for the instruction; good to see that your experiment was used on something that you would not mind destroying, I don't have that luxury. I have been looking at the ZOHD Kopilot and your Favourite F405 for one of my 1600mm Volantex. They are almost the same price at the moment!! Which would you recommend for newbie FPV 1-2k flying? Cheers.

@AndrewNewton

3 жыл бұрын

Kopilot would be quicker and much easier to get going.

Great video! Do you know how to set ESC braking on the G2? I tried to follow some manuals I found online but they were very confusing.

@AndrewNewton

4 жыл бұрын

Search for ESC Brake Setting on my channel

Not sure if it's in here but off hand how do you setup failsafe RTH I heard you say it's in the receiver AUX chan but what do you do? Thank you, I know this is an old video but a friend and I are just setting these up now. Have a very merry Christmas and a blessed New Year!

@AndrewNewton

6 ай бұрын

Depends on your radio but here's how to do it with FS-i6 radio kzread.info/dash/bejne/gZumkpSvm9vKdZM.html Merry Christmas yo ho

Love my Ranger G2...amazing distance, even on a 2200 3S...F405 wing FC...UHF and long range video...Great plane. I'm assuming you set the RX to Failsafe into the RTH setting... With a bit of mid throttle to bring it back..?

@AndrewNewton

4 жыл бұрын

I only set the RTH switch in Failsafe, nothing else. Throttle seems to be controlled by the board in a failsafe.

@EnglishTurbines

4 жыл бұрын

@@AndrewNewton Good info, thanks Andrew....someone in my Club wants me to advise him on this for use in his high end Moto glider....

Great video as always, very informative. Just got a Kopilot (thus the question now), it seems you set it up, fly in manual mode, trim on the tx and land. You then re-set the Kopilot to allow for the tx trimming but do you then re-set the tx trims to zero? Thanks.

@AndrewNewton

4 жыл бұрын

No you would leave the trims as they were. But are best to land then adjust the pushrods manually first, then you will not need any trim.

Hi Andrew I love your videos thank you for all your great material I am building your beginner plane and it is getting there. I was wondering as it only has rudder and elevator would it still be possible to install the kopilot on that without the ailerons?

@AndrewNewton

3 жыл бұрын

I have tried INAV in that way and it sort of works as long as the plane is very docile.

@jortijn

3 жыл бұрын

@@AndrewNewton thank you for your quick answer I might enable the ailerons on the plane and use the stabilisation option

Hi andrew can you use dual rates with this unit ? Great review thks 👍

@AndrewNewton

4 жыл бұрын

Only on Manual mode switch position

Thanks for another nice video Andrew. This setup provides RTH and RTL features in addition to what S6R or S8R has? Or is there any knife edge gyro kind of support available? Also appreciate if you could share a video for complete S6R or S8R setup with X9D or point me to one if already exists

@AndrewNewton

4 жыл бұрын

Only one stability mode and RTH on the Kopilot. Surely a KZread search will find a setup video, have you tried?

@zayirmohammed3475

4 жыл бұрын

Tried but most of them with qx7 or x9D plus not sure if there is any difference with X9D

Hi Andrew, Do you know if I can mix differential thrust on this FC? I'm making a massive twin motor with landing gear without any wheel steering. Do you know if it won't bug-out and support this mix?

@AndrewNewton

3 жыл бұрын

Dont know really. You might have to be the pioneer and let us know if it works.

@AeroStuffFPV

3 жыл бұрын

@@AndrewNewton Great, I'll let you know.

@AeroStuffFPV

3 жыл бұрын

@@AndrewNewton Hey man! - I eventually didn't install the Kopilot on my ''Twin Giant'' design to test the differential. But the aircraft turned out pretty darn good! Even Ed himself from EA positively reacted to the flight video! I hope you'll check it out.

Hi mate great video and a another Aussie explanation love it. Im new to planes not to rc. I have got a fms 64mm f16 jet yes i know for a first plane its probably not the best haha. But hey here i am. Im currently in the process of buying transmitter budget friendly for now. Im looking at the flysky i6 or frysky x9 in your opinion what is my best option cheers?

@AndrewNewton

Жыл бұрын

Thanks. FlySKY i6 is OK but i6X would give you more channels. But I would strongly recommend a multi-protocol radio running EdgeTX like the Radiomaster Boxer or Zorro. The FrSKY X9 Lite is excellent but restricted to FrSKY receivers.

brilliant vid. andrew. just gone to bangood and bought one as im fairly new to the hobby,only thing i didnt understand was (s.bus) what is an s bus ? thanks

@AndrewNewton

4 жыл бұрын

SBUS is an alternative way to connect receiver to flight control board. All channels are sent via one wire, rather than the usual PWM which sends each channel on its own wire. Kopilot can handle either PWM or SBUS connection.

Thanks for the setup video. I have a ESC without the 5 volt bec . Do you think the separate 5 volt bec power can connect to my radio receiver and pass through to the kopilot flight controller?

@AndrewNewton

3 жыл бұрын

Yes, absolutely

Hi Andrews. Thanks for another great video. I’ve just brought myself a KOPILOT lite and am looking forward to installing it. Just one question though if that’s ok? What way up does the GPS unit go ? Don’t see it mentioned anywhere in the manual . Many thanks and happy flying. ✈️

@AndrewNewton

4 жыл бұрын

See how I have it mounted in the video. Beitian text facing down.

@crispy2473

4 жыл бұрын

Andrew Newton That’s great. Thank you. ✈️

hello you understand that the controller works, you recommend it if it works well the return home thanks for your answer greetings excellent videos

@AndrewNewton

4 жыл бұрын

Yes Return to Home works very well

I have several of these great little FC's and on reading the accompanying leaflet it seems to be saying, if you don't plug in the GPS, you get altitude hold instead of RTH. I haven't tried it yet but if you're just flying locally, it could be useful to know.

@AndrewNewton

3 жыл бұрын

Yes I must check that, thanks for the reminder John

@johnsheehy6172

3 жыл бұрын

If it works you could put the GPS on a switch and include that switch in your failsafe using the aux channel if you're on SBUS.

@johnsheehy6172

3 жыл бұрын

On second thoughts, home might be where the GPS was last switched on.

@theoztreecrasher2647

Жыл бұрын

@@johnsheehy6172 I don't know but it's probable that the GPS unit will treat the point at which it acquires more than 6 satellites as the Home Point as long as it has Vcc and Ground continuously applied to it. The Kopilot unit will operate on that Home Point when it is receiving the information via the GPS Tx/Rx connections. So your set-up just might work by using ch6-AUX to operate an RC switch to connect or break the Tx? line. You would need to set the receiver to failsafe ch6 to re-connect when signal is lost.

Great video Andrew thanks. I installed mine yesterday but I can't get it to confirm the level flight setup. I put the sticks to the positions shown in the manual and your video with it in stabilization mode but I dont get the flashing light confirmation. Am I missing something here?

@mickelson8332

4 жыл бұрын

Sorted! something to note for all, because I had my rates set very low, the kopilot wasn't carrying out the level attitude calibration. I was putting the sticks in the right position in stabilised mode but it wasn't giving the flashing light confirmation. Painless360 said to increase the rates to 100% and bingo, worked straight away. 👍

Can i have crow mix braking when my ailerons are plugged into a ZHOD KOPILOT LITE but turned off? Current set up is a Voalntex Phoenix V2, Flysky FS-i6x and FS-i6b, plus the Kopilot. what i am thinking is it possible to use the crow mix when the Kopilot is NOT engaged like when coming into landing i turn the Kopilot off so would crow braking then work or not? or would i need a bigger number receiver? as i have a 6 channel that is all used up.

Hello Well, I have a zhod that of 900m you really recommend this stabilizer you find some better ones greetings and thanks

@AndrewNewton

3 жыл бұрын

If you just want a stabiliser NX3 gyro is good

Hi Andrew, congratulations on your channel. I have a kopilot, why are movements in stabilized mode so limited compared to manual mode? Is there a possibility of increasing them to make the wing more agile? thanks greetings

@AndrewNewton

4 жыл бұрын

That's just the way it is. Need to increase your throws so that manual flying is good at 50% rates then program 100% rate for stabilised modes.

@quiquemsa

3 жыл бұрын

Thanks Andrew, I am 100% stabilized, I still do not have a good response in stabilized, when I have lower gains I have more aileron travel and it is more agile worse it does not stabilize well, it jumps, I cannot find the balance between well stabilized and more aileron control and depth. perhaps ZOHD should consider the possibility of better adjusting this problem. thanks greetings

Andrew, very informative indeed. Should the GPS be facing up the otherway ( The BN-220 GPS Label taped to the foam? Or does it not matter. I have no idea - I am setting up a ZOHD now and not sure. Also, can't seem to get the calibration working - no flashing lights ( I do have the switch set to stablised mode, GPS locked ).

@AndrewNewton

3 жыл бұрын

Antenna should be facing the sky, so Beitian label faces the ground. Watch my other Kopilot videos for trouble shooting tips

Fantastic video. Tanks! How about shutting the motor off once the plane's circling above you ? Will it auto land ? Cheers

@AndrewNewton

4 жыл бұрын

When the battery expires maybe.

@sergeserge6130

4 жыл бұрын

Andrew Newton Oh, you mean you can't turn the motor off while in automatic mode ?

@vipertruck100

Жыл бұрын

@@AndrewNewton Hahaha, I love that reply.

When you set the radio failsafe in RTH mode . Do you set the cruise throttle on your failsafe . I set up the Kopilot flight controller in the mini sky hunter with Ezuhf one of my more favorite planes. Thanks

@AndrewNewton

3 жыл бұрын

No, just set Failsafe to activate RTH Mode, dont include throttle because the Kopilot takes control.

hi Andrew great video, can you tell me how to set up failsafe I'm using jumper t16pro and crossfire nano I don't know how to set it up, I turn the tx off and the motor stops completely. thank you.

@AndrewNewton

4 жыл бұрын

Can't help with Crossfire sorry

Nice video. Can kopilot support flaps on a 4 channel fixed wing?

@AndrewNewton

3 жыл бұрын

If you use SBUS there is a spare AUX channel on the Kopilot to use for flaps, or you can plug flaps straight in to your receiver ch 6

@emilgabl9069

3 жыл бұрын

@@AndrewNewton thanks for responding!

Hello Andrew. Great video once again. Listen bud I am setting up a new nano talon EVO with Kop_Pilot and I am wanting to get the failsafe settings correct. What I need to know is when I am in my failsafe custom settings what do we do with the throttle. I ask this cause once channel 5 RTH is initiated I would think the kopilot will be controlling throttle as if we engaged RTH by switch. Please let me know how the failsafe on open tx should be setup. Thanks in advance buddy_ Joe

@AndrewNewton

4 жыл бұрын

Kopilot handles the throttle so you dont need to set it in the custom failsafe setup. Here's photo of the failsafe screen kzread.infoUgy99qSI7mOi5_1US894AaABCQ

Hi Andrew thanks for the video! I'm going to have a go at auto launch mode, so it's RTH mode with the throttle stick 80% to %100? Also when the gps has got a fix is this the RTH location? cheers

@AndrewNewton

3 жыл бұрын

Kopilot takes control of throttle in RTH mode (and autolauch), as long as it's not on zero. Home position is where GPS acquires enough satellites.

What do you have the radio failsafe set to in the model? Cut? Or custom to the Aux channel for rth

@AndrewNewton

4 жыл бұрын

Custom - Ch 5 to RTH position

So this Kopilot system comes included with the ZOHD Talon EVO FPV plane. For long distance FPV flying over 2km, is there a special SBUS receiver you recommend to avoid losing signal?

@AndrewNewton

3 жыл бұрын

FrSKY R9 system is what I use

Hi! Great video. Questions: 1. My wing flies well in normal mode. It flies also well in stab mode but I have almost no control in this mode. The travel of Ail and Ele is much less in this mode, almost nothing. Why? Using a frsky taranis q7. 2. For the throttle to work on my controller I have to inverse it (weight -100 on Taranis). 3. I cannot calibrate the plane (sticks inside and down). The green leds won't flash after 5 seconds. Thanks.

@AndrewNewton

4 жыл бұрын

Thanks Martin. I have a video showing all the setup and problems coming soon. 1. That is the way Kopilot works and I agree there is not enough control in stabilise mode. Need to increase the throws mechanically by changing which hole the pushrods connect to, then reducing the weights just for manual mode switch position. 2. That is weird. Have you inverted Ch3 in the Outputs page? 3. To use the stick command method of level calibration you must have 100 weight on Ch1 Ail, Ch2 Ele, Ch3 Thr and Ch4 Rud and no throttle cut activated. Kopilot does the level cal automatically when you plug the battery in so maybe dont bother with the stick command method. Must be in Stabilise mode (not RTH)

High Andrew. Can you advise. could I put this unit into a full house sailplane. Multiplex heron.

@AndrewNewton

3 жыл бұрын

Not if you want full house function. It will do ailerons only on a Y lead

Thanks Andrew, I've just bought three of these and you've answered a lot of my questions. Didn't know about the auto launch mode needing throttle. 👍 I did find that with Sbus, you can connect the throttle directly to the receiver (X8R). Cheers.

@AndrewNewton

4 жыл бұрын

You can but throttle needs to connect to the board for Launch Assist and correct RTH throttle control.

@davidwatkin1484

4 жыл бұрын

@@AndrewNewton thanks, you probably saved me several hours of frustration....and possibly a lot of glue 😁

I've just spent a frustrating couple of hours when nothing worked as it should. The led's kept flashing and there was no beeping to search for satellites. I eventually discovered the switch I chose for the modes was reversed and I'd been in return to home since I started. I wish I could say I figured it out but I just flicked the switch for manual mode a bit harder than usual. All's well now (it was well all along but now I know it).

@AndrewNewton

4 жыл бұрын

I have a Kopilot setup and trouble shooting video ready to go. The same issue frustrated me for a while too.

Thanks for nice video. When throw the plane with rth mode, do I should put the throttle stick up or just leave it bottom position? Another question is, Can we still control the throttle during flight on rth and stabilized mode?

@AndrewNewton

4 жыл бұрын

Throttle has to be up a bit for RTH launch. Cant control the throttle in RTH mode, but yes you can in stab mode

@RCstagram

4 жыл бұрын

Andrew Newton thank you so much. Whatif the gps can’t find satelites in indoor? Can I control still control the throttle stick in stab mode? In my caee, I can’t control my throttle stick in stab mode indoor. Even though I pull it up, the motor does not spin. Is this expected?

@theoztreecrasher2647

4 жыл бұрын

@@RCstagram Motor won't start in Stabilize Mode without GPS lock. Motor will run in Manual Mode without GPS lock. In RTH Mode (with GPS lock) the motor won't start unless the plane is moving at more than 4m/s. NOTE!! The 4m/s is the Ground Speed as measured by the GPS unit. SO!! If you are in RTH and the ground speed drops under that for any reason (unlikely but has happened to at least 1 pilot) the motor will stop!