This is the best tutorial for this gimbal! I purchased one (can't remember which one!) last year and it was so complicated to set up! I returned it and gave up on a gimbal. Until yesterday. I ordered one and found your tutorial. I'm all set and now ready to practice! Thanks so much! I'm sure I will watch this over and over again!

@Jason_Hermann

Ай бұрын

You're very welcome and thank you for the kind comments :)

@ReinventedDelaware

Ай бұрын

@@Jason_Hermann I'm trying to connect my Canon m50 mark 2 Bluetooth connection to this gimbal. I have searched for instructions online but no luck finding help! Can you tell me how to connect this gimbal to my m50 via Bluetooth? T

@ratt57

25 күн бұрын

This still looks way too time-consuming and complicated to me. I heard this gimbal was easier to calibrate but it looks just as tedious and confusing as the others. I'm still waiting for the day when someone creates a gimbal that can electronically calibrate itself based on the camera's weight... which will probably never happen. Thanks for this video, though, I would have bought and gimbal and then had to return it, lol! 😅

Probably the best tutorial for gimbal set up. Thanks a lot..i bought the cinepeer weebill too but was concerned how to set up with my zv-e10 using Bluetooth and this is what I needed

Даже у Weebill нету такого подробного видео, как тут)) Спасибо) Thanx!))

Thank you very much! Super helpful video!

Excellent video. Perfect setup explanation. Thank you

@Jason_Hermann

Ай бұрын

You're welcome!

It's the very best video about this gimbl

@Jason_Hermann

Ай бұрын

Thank you :)

Very detailed tutorial thank you so much!

@Jason_Hermann

Ай бұрын

You're very welcome!

This was super helpful! Thank so much!

@Jason_Hermann

12 күн бұрын

Glad it was helpful!

Thank you for a great tutorial.

@Jason_Hermann

Ай бұрын

You are very welcome!

Great job explaining set up and operation.

@Jason_Hermann

Ай бұрын

Thanks!

Very useful tutorial: I am about to buy this gimbal and I needed this kind of tutorial to see the process of balancing and working with it. I have now the Canon R6 that doesn't fit my current gimbals (more a question of front heavy lenses and no room to pull back the camera on the gimbal) and this one seems perfect for this camera. At first I was afraid when you set the camera to the right (it being a small camera) but then I see that the balancing is done moving the camera away from the motor, so a bigger camera will still have room for balancing. 20:20 .... the Fallow mode used to be the Follow mode, but now people will use the Fallow mode.

Good work..,hopefully will afford this someday

@Jason_Hermann

Ай бұрын

Thank you and it's fairly affordable at ~$250 US....

Jason, did you do a Beginners Guide video on Sony RX10-IV. I really like your videos and was hoping you have a video about this. Thanks!

@Jason_Hermann

Ай бұрын

No, but I made a lot of RX10 IV Videos! kzread.info/head/PL3SqIRuKwn7-5wyzjwZL3nz2ca7qW4sCc

Great, thank you!

@Jason_Hermann

9 күн бұрын

You are welcome!

Maybe use a washer so that lens isn't touching mount when you focus? A washer would create a tiny gap between metal mount and lens. What do you think?

@Jason_Hermann

19 күн бұрын

Yeah that will work most likely I would say. The 3s has two plates you can stack together for the extra height, but the 3e does not...

Hi Jason you have a new subscriber here I've been following your channel for a while now, I've been watching videos about the Sony ZV-1, the way you explain all the situations, great tips, I would ask you a favor because I'm a certain age and there are many settings on the Sony ZV1. If I could, in a few words the settings for filming in progress always under the sun on 16/9 to put the video on KZread I would appreciate it, if it is not possible no problem I will continue to watch your explanations as an expert. Have a nice day Greetings

So super 🎉🎉

@Jason_Hermann

Ай бұрын

Thanks!

Do you have experience, using the gimbal with extra accessories on the camera like camera cage (smallrig), a microphone (JOBY or Rode) and especially an external monitor or iPhone as monitor on top . I am using a Sony ZV-E10 with camera cage + JOBY Mic + Accsoon SeeMo 4k with iPhone. The hole setup weighs about 2.2. up to 2.4 kg, but is "very high". Looking for your answer. Greetings from Germany.

@Jason_Hermann

Ай бұрын

Yeah, that is not going to work very good if I had to guess. I would try and get the monitor mounted to the gimbal handle itself some other way. Some gimbals come with extra mount points where you can put a smallrig arm to hold the monitor for example and other things. You also might be better off removing the cage to save the weight unless you absolutely need it.

Hi Jason, I just bought mh Zhiyun Cinepeer 3E and I watched your tutorial as well. I set it my camera and every time I turn on my gimbal it says Axis Lock. I unlock everything and it keeps saying Axis Lock. For this reason I can not go through all the settings . Please let me know how to unlock Axis gimbal. Thank you.

@Jason_Hermann

Ай бұрын

There are 3 separate lock switches. The Axis switch is on the bottom right where the top of the handle is. I talked about that axis here: 12:05

Hi! please help me with something..i hace a Falcam cage...with a f38 quick release system...is there a way to use another baseplate beside the manfrotto that comes with the gimbal? like an arca swiss QR? thanks a lot!

@chenlyn-cj8ve

23 күн бұрын

not tested it but I am afraid not. :(

@Jason_Hermann

19 күн бұрын

I don't think so, but maybe with some special smallrig type of plate or something I am not aware of...

Hey jay i just bought a a6700, really excited about it and i have spend like couple hours in your channel and it has been very informative. I was wonderding if you have any advice on some free editing programs for video and photos i have used my money on the cameras. What would you recommend

@Jason_Hermann

Ай бұрын

Hey there, Awesome camera you got! DaVinci Resolve has a free version, I would recommend that... www.blackmagicdesign.com/products/davinciresolve

@marcomaldonado169

Ай бұрын

@Jason_Hermann Thank you I really appreciate your content and being an honest and humble creator.

I just got the gimbal i balanced it facing upwards and the screw is not tightening 😢😢😢😢 what do I do?

@Jason_Hermann

19 күн бұрын

Maybe try pushing in on it as u turn? It has a slip lock design.

@random-gp1rl

19 күн бұрын

@@Jason_Hermann when I lose it a small ring came off I now saw it on the floor trying to unscrew that locking device but nothing !

@Jason_Hermann

18 күн бұрын

It sounds like you loosened it to much and it came apart which is not good.. You are going to need to fix that or send it back for repair. If you have all the parts, perhaps ask a friend that is good with that stuff to try and put it back together? A mechanic could prolly figure it out if you have all the parts for example.

Do we have vertical option in 3e lite

@Jason_Hermann

19 күн бұрын

It's weird I do not see a lite option on the website for me to compare with?

are this gimbal is compatible with the fuji cameras?

@Jason_Hermann

Ай бұрын

Yes, but some features may or may not be available per model as you can check here: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240627/1719456043219-rQ53SB8x.pdf

@victorrodz3

Ай бұрын

@@Jason_Hermann thanks

They just keep taking baby steps releasing these toys - very recently it was called the Crane M3S, which continued all the same flaws. This latest is no exception: the manufacturing tolerances and fundamental design simply make balancing terrible because of poor friction from even a lightweight mirrorless payload. And the easiest thing for them to fix would be the horizontal balancing at the axis instead of at the plate. Basically, every time you set up and break down, the poorly devised balancing process needs to be repeated. Simply not the case for, e.g., the Ronin RS3 Mini.

@Jason_Hermann

Ай бұрын

Yeah I hear ya and prefer the arm slider as well for balancing the roll access.

@stevennoble2608

Ай бұрын

Yeah but $200!

@stevennoble2608

Ай бұрын

This "toy" gets me out and shooting stabilized for low low dollars, so yeah!

@Marudowl

29 күн бұрын

Less moving parts = less expensive to make and also more portable

@cageshowproductions7212

26 күн бұрын

@@stevennoble2608 I agree, one can easily get carried away with expensive camera gear, and for what? I'm new at this, and like you said, when new at it you don't tend to notice all the imperfections that maybe paid professionals do... Right now I just want to shoot some cool videos without it seeming like a 'shake and bake' commercial with me holding it in my hands.

Can a monitor be mounted?

@Jason_Hermann

22 күн бұрын

Not easily, no...

@Born2Legit

22 күн бұрын

@@Jason_Hermann okay thank you.