Great video , I am a ford guy I have a 1946 and 1947 with a colombia overdrive and the v8 great show thanks, Arthur from Denmark.

This is gold! I inherited a 40 coupe last november and a whole mess of parts 4 motors 3 or 4 transmissons and new and old verious parts some new still in there boxes some used. Alot of my freinds were trying to get me to ditch the flathead(not going to happen) several of these videos ive watched helped me identify things that were just laying around . Thanks for making these videos and passing on information. I will continue to sift thru this gold mine.

Freeze the shaft, and heat the bearing up in a hot oil tub. Easy peasy

Great video as always. Thanks for sharing

@WiredCustomsSpeedShop

Жыл бұрын

Thanks for watching Jay!

That was good to know i will be doing my 1950 f truck it won’t stay in second gear pops out gear

We used your advice from your past videos to rebuild Edna's transmission on our channel last year. Pretty scary at first but now it's not a big deal to tear one apart. We only live 45 minutes from the Early Ford V8 Sales store

I'd like to see a video on rebuilding a T87-D transmission. I cant find any books or parts for them.

Great video! Tons of info, just blew up 2nd gear in mine, perfect timing on the video

@WiredCustomsSpeedShop

Жыл бұрын

Thank you I appreciate it! Should be an easy fix!

Would that trans fit ford y block ? Thanks love your video s Very good ! That hand soap work s 🇺🇸great too

@WiredCustomsSpeedShop

Жыл бұрын

None of them unless you have a bell housing conversion, then all the top loaders would fit

HAMMERPETE I NOTICED THE ON THE THRU OUT BEARING SLEEVE THAT THE SEAL WAS IN BACKWARDS - THE LIP WAS FACING OUT INSTEAD OF TOWARDS THE FRONT BEARING TO KEEP THE OIL IN THE TRANNY..

@1320gearhead

3 ай бұрын

I also noticed that he installed the seal backwards that's why I even looked at the comments on this video to see if anyone else caught that.

Great info! Just have one question, do the front and rear ball bearings get greased at all?

Zack, when you did the trans. on your '47 did you remove it from underneath or thru the interior? Need to do mine soon. Thanks. Love the channel.

Hi Bud. I am wondering if you could help me source the 4 speed manual transmission output shaft seal for my 1950 Ford F-1 with the flathead V8 engine? I appreciate the help! thanks!

Very good tech, thanks! I wonder if there is an easy way to tell Zephyr gears from regular Ford gears or is it just gear ratio what is different?

@WiredCustomsSpeedShop

Жыл бұрын

One of my last videos I break down the differences between the gears so you can tell which one is which

@ilarikarling2116

Жыл бұрын

Thanks, I may have missed that video, thou I usually watch all your videos. I have to look it up. 👍

@ilarikarling2116

Жыл бұрын

Thanks, I may have missed that video, thou I usually watch all your videos. I have to look it up. 👍

@WiredCustomsSpeedShop

Жыл бұрын

@@ilarikarling2116 No problem, thank you for watching my video!

What's the difference between the Zephyr gears and the ford gears