This engine is for sale....

@patrickgoodman2111

10 ай бұрын

What’s the price on the engine?

@Gen3AntiqueAuto

10 ай бұрын

@@patrickgoodman2111 Depends on it's state of completion - email me if you're seriously interested.

@patrickgoodman2111

10 ай бұрын

@@Gen3AntiqueAuto what is your email address?

@joseelizalde5542

4 ай бұрын

@@patrickgoodman2111 ññ

Another way to adjust the clutch is to measure the clutch spring installed height. Using this method you set the installed height at 2”. Meaning you adjust the screws until the spring it self measures2” from end to end

this is the best explanation of how the transmission even works that I've seen so far, and that's not even what you were trying to explain. very nice. thank you.

@Gen3AntiqueAuto

4 ай бұрын

Wow, thanks!

@Gen3AntiqueAuto

4 ай бұрын

I'm doing another one right now - let me know if i I missed anything and if I get it in time I'll add in the info to this one.

Thank you. Really enjoy your approach and execution

@Gen3AntiqueAuto

Ай бұрын

Thank you for watching - I'll do more if there is a market for it! Any requests?

Thank you for this video. I'm a line tech and this is cool stuff.

Great video

Excellent video, very informative, good illustration, look forward to more of your content! Thank You

@Gen3AntiqueAuto

Жыл бұрын

Thanks

@joseelizalde5542

4 ай бұрын

Muy bien y bien prolijo

You are very good at what you do My daddy was a model A_ an T mechanic I was his h

@Gen3AntiqueAuto

6 ай бұрын

you must have some great memories!

exelente video

@Gen3AntiqueAuto

27 күн бұрын

Gracias

I'm doing that right now.

@Gen3AntiqueAuto

11 ай бұрын

Hopefully what I did was helpful for you.

Very cool do you have of the bands and installation

@Gen3AntiqueAuto

2 ай бұрын

of course! It's in the middle of the 1925 restoration playlist.

@Gen3AntiqueAuto

2 ай бұрын

Here's one link: kzread.info/dash/bejne/mqKG3Nidka60Zso.html

@panheadbutch

2 ай бұрын

Thank you

You should have twisted the wire between the bolts so that they want vibrate and brake plus it looks nicer.

@Gen3AntiqueAuto

3 ай бұрын

Who's going to see it?

i have been enjoying your Mod T videos I' m currently doing the same job . I'm at the point of installing the magneto, and I find that the KR Wilson tool is no longer available. I have looked every where. My question is how critical are these measurements and is there another wary?

@Gen3AntiqueAuto

3 ай бұрын

Off the top of my head and you should look it up - 0.030" clearance is what you want. You can do it without the tool, just takes longer. Do JUST the flywheel and spare your back, build the transmission on it when it's done.

you forgot the oil feed line

@Gen3AntiqueAuto

9 ай бұрын

you sir are absolutely correct. Good thing I never rush into a project! The transmission and the block are now for sale - seperately.

@kenpruvit1037

9 ай бұрын

@@Gen3AntiqueAuto I did the same thing , I hate double work ,Thank god I realized it while putting the pan on

@Gen3AntiqueAuto

9 ай бұрын

@@kenpruvit1037 yeah well I should have known better... 🤣

Nice job. However a little more detail and perhaps a new microphone.

@Gen3AntiqueAuto

6 ай бұрын

What details are you interested in specifically? and yeah - audio is a HUGE pain in the a here. Bought a lapel mic - made it worse.

Hello Gen III Antique Auto With wat torque (Nm) are the four screws of the flywheel screwed onto the engine ? Thank You very much for Your help !!

@Gen3AntiqueAuto

2 ай бұрын

I would guess about 40-45 ftlbs. "tight" then wired so they can't move.

@alfonshinkel863

2 ай бұрын

@@Gen3AntiqueAuto Oh, thank You very much for the answer Best wishes and greetings from Bavaria!

@Gen3AntiqueAuto

2 ай бұрын

Did you see this one? kzread.info/dash/bejne/l6adlsWOaKrQXdo.html @@alfonshinkel863

For 10 thou out you needed to move the shaft 5 thou

@Gen3AntiqueAuto

7 ай бұрын

agreed!

Why are there fan blades on the flywheel?

@Gen3AntiqueAuto

2 ай бұрын

that's the "oil pump"

@Iowa599

2 ай бұрын

Oh, shit…"combined oil pan"…I forgot that part. That "pump" has to drag lots of power! The transmission is pretty clever. Like the precursor to the Hydra-matic, missing the hydraulic coupling (tq convertor) & actuators. I'm kinda surprised I haven't seen an Arduino/servo kit that will operate a Model T transmission "automatically".

Let's use the communist measurement- 9and 3/4 s (97.5mm).😂

@Gen3AntiqueAuto

8 ай бұрын

Appreciate the comment!