✅ Tired of making 1 part at a time? 👉piersonworkholding.com/pro-pallet-system/

9:44 "let me walk over here and find a wrench" - a rare moment when Jay Pierson has to expend more than an average of 2.7 footsteps to pick up requisite tool :)

@PeterBelfanti

5 жыл бұрын

segway time...

@OakwoodMachineWorks

5 жыл бұрын

"Close up shop guys, we are laying everything out from the ground up again"

Thanks for that 3 design philosophy. I'm very intrigued to try that on my next design project

Has to be the most interesting end user channel of Universal robots. Nice work 👍🏻

Great job. Nice when a plan comes together.

Very informative Thanks for making these videos

The first item that I made on a manual mill was an x ray wedge for the atomic energy commission. I was instructed to overlap the rubber O ring gasket with a 45 deg angle. So I did that, try it.

Good stuff! Lots of little details in here that apply to larger applications.

Great video, I like the 3 design method. Please speak later on how long the gasket works. I've always used suction cups for EOAT, never tried your method.

More ROBOT!!!!! Great video, keep’em coming.

Your videos are just getting better and better. Just a tip with your focusing of the camera, if you're showing a small part keep it still and use a backdrop, like your hand so your camera man has an easier time focusing. Can make the viewer abit quezzy with the in and out focus all the time. Thanks for doing such an in depth look at the UR and your product, both are definitely in my future next year. Cheers James - Fifty50 Knives.

@DavidtheSwarfer

5 жыл бұрын

ja, and camera dude, please stand still, you make the Blair Witch project jealous, and me dizzy.

@OriginalJetForMe

5 жыл бұрын

@@DavidtheSwarfer PLEASE stand more still. The motion is excessive.

I'm a UR integrator in SoCal - any chance of selling those end effectors?

Nice Design!

would have thought a scissor action side clamp (like automobile phone holder) would have been better vacume and small ram to activate given the presence of swarf from machining

At 4:48, you have that large area highlighted as a vacuumed surface, but does the part rest against that surface? Or is it up off that surface just a bit?

@PiersonWorkholding

4 жыл бұрын

Our vacuum gasket has a foam core and fully compresses so the part sits on the highlighted area.

What type of scews was that? Can you put out a linkt to where i can find some info. Thanks :-)

@rashesthippo

5 жыл бұрын

I found these on McMaster-Carr. www.mcmaster.com/#standard-rounded-head-screws/=9e23926152174799bc201ce5b715eac6jx272gqu

You added the center boss to locate the part on the axis of the robot faceplate, but you forgot the additional dowel hole to clock it. You'll want that on there if you plan to take the vacuum tooling off at any point, so that way it will go back to the same radial clocking that you have in the program.

@PiersonWorkholding

5 жыл бұрын

Nope. It was very intentional to omit the dowel hole. You'll see why in a future episode.

Sweet!

Where did you get this screws? Are they standart?

@PiersonWorkholding

2 жыл бұрын

McMaster Carr

What is the walkie talkie app you guys are using?

@PiersonWorkholding

5 жыл бұрын

Voxer - Works on Apple, Android and desktop.

14.9 or 14.7 psi ?

@PiersonWorkholding

5 жыл бұрын

14.95 is absolute maximum holding power one can get... at sea level... on Earth.

Isn't that 24 lb pallet actually over the weight capacity of the UR 10 ?

@Uk_Grid_Engineering

5 жыл бұрын

The ur 10 will have a 10kg limit at it's full travel I would expect more the closer in to the base up to the limit of the servos

@johntrowbridge6190

5 жыл бұрын

Thats probably a fair statement

@ltborg

5 жыл бұрын

I was wondering the same thing. I'm curious if there's a load meter or something on the UR control that gives you an idea of what is reasonable and what isn't.

@dtec30

5 жыл бұрын

@@ltborg it would have current sensing they use it for overload and dingleberry interuptions (some operator gets in the way of the robots machine domination) lol

One of the best title baits! you s.... of a.. :P

that intro lmao

It would be nice if you made a video at some point, explaining how the vacuum is being created. I really don't understand your vacuum source. Not even in theory.

@bmonty65

5 жыл бұрын

Google the venturi principle!

@danl.4743

5 жыл бұрын

@@bmonty65 I know the venturi principle very well. I went to an aviation high school. And I guess everybody knows how a paint spray gun works with the air compressor. But I am interested in a more technical insight of how this amount of machining vacuum is produced. Pierson said a few intriguing things I never knew before about vacuum. It got me super curious.

@ke6gwf

5 жыл бұрын

@@danl.4743 The vacuum source is simply a small venturi device using shop compressed air passing through a venturi to draw air out of the vacuum system. It is a standard device used in many systems needing only a low level of vacuum, such as medical suction, pick and place machines, etc. Some use multiple stages of venturis, each a little larger than the previous as the compressed air expands, to work rapidly, so the later stages move air faster, and as vacuum increases they seal off, until only the high vacuum low volume first stage is operating. For a high vacuum such as a vacuum tube etc, it takes other types of pumps or machines to remove the last tiny bits of air, but you don't gain much when you are just wanting to create a mechanical force. Pierson has their own product, and it is a little more efficient than many, but uses the same principle as a paint sprayer or carburetor. The amount of vacuum holding power is calculated by looking at the surface area that the vacuum acts on, and the PSI of the vacuum source, and multiplying the psi by the number of square inches. Same math as calculating the force in a hydraulic cylinder, psi of input pressure times the square inches of the piston. In this case, the part is the piston, and hydraulic fluid is the atmospheric pressure, with the vacuum source creating a pressure differential. At sea level mean atmospheric pressure is 14.7 psi, decreasing with elevation, but the actual vacuum created by a venturi source will be less than the perfect vacuum, so 13-14 psi max, depending on the unit. And any air leaks in the gasket or system will decrease it further by reducing the pressure differential. , so a good gasket is needed. And remember that at higher elevation your holding force will decrease,.

@danl.4743

5 жыл бұрын

@@ke6gwf Thank you VERY much for this detailed and thorough explanation. You nicely put the mosaic pieces of information together in a logical way. I enjoyed reading it, and I hope others will find it and have a chance to read it too. Thanks man. Well done! :)

@37kuba

Жыл бұрын

@@ke6gwf this is an awesome explanation. Thank you! Do I understand correctly that the amount of air in the pipes and the "pocket" of the gripper should be minimal, to improve the actuation speed? Would there be any benefit of having this pocket larger in some special cases?

"Power"= mass / surface ? Dude!☺

So disappointed I was expecting a failure...

I rather know how many dislike on this video...

Their "...pallets go from 6"x10" all the way up to our 10"x6"..." maybe he meant 10"x16" ???

@danl.4743

5 жыл бұрын

No, he meant that they can go all the way 90 degrees. ;)

@nickristoski

5 жыл бұрын

Jay, great job on your videos. Just a heads up, when calculating safety factors, you need to look at in a dynamic situation. Your worst case senario should be when the robot is rotating toward gravity and an e-stop condition occurs. I don't mean to be mean spirited, just passing knowledge along. Keep up the great work and I love your though process.

@ke6gwf

5 жыл бұрын

@@nickristoski since life safety isn't a factor, just a sore toe, the safety margin is not as critical. And the real test is to see if it will come off if bumped by an operator, which is a higher load condition than just an E Stop of the slow speed arm

Great video, but what's the point with the title? I don't hear anything mentioning UR10, so just clickabit

@PiersonWorkholding

10 ай бұрын

Did you catch "Episode 3" in the title? It's all about the UR10e.