You Need THIS TRANSAXLE in Your Mower! The perfect swap in diff… “Almost to easy”
Автокөліктер мен көлік құралдары
If your transaxle keeps breaking or bending axles shafts! Look no further than a peerless 820!
This is the perfect transaxle for off-road or race applications!
One of the best if not the best top input transaxle.
These diffs came in so many different mowers and I’m sure you can find one in a old crapped out mower for cheap!
Unlike us who have search far and wide for these transaxles to find nothing, then be awarded two beautiful 820’s from the mower gods………… thank you!
I always suggest a skid plate or brace plate on your off-road mower as these style transaxles have a alloy of a sorts case that is no where near as strong as a cast iron/Steel casing!
Good news is the 820 has a much thicker casing then all of the 3/4” shaft transaxles!
But still I always side on the caution of keeping it safe and uncracked!
This diff will basically bolt into almost any mower with a manual transaxle and need little work to make it fully functional!
If you are looking into a peerless 820 ch do out our build series on “MAGNUM THE MOWER” as we modified our 820 to make it even better!
Scroll through our channel to check that out!
Don’t forget to subscribe and check out our Instagram page!
Thanks again for your support
Пікірлер: 45
You really should sell those skid plates for 820s cus for the right price id buy one yall are amazing fabricators
I do in fact own one of those!!! And I can 100% attest to this set up being Bad Ass! I’ve gone through Diff after diff until you built this for magnum, thanks again buddy! Your work is always appreciated
This is badass. Exactly what I needed.
Im darby in PNW Oregon USA and youve inspired me a lot with this exercise of passion.
Hey Came across your channel and had to subscribe. Nice work
The 820s are such a pain to get hold of in the UK but boy are they worth it! This country is littered with 801 and 832 transaxles though, so I just run them and constantly have spares on hand.
I'm using an 820 right now in a racing mower for USLMRA
I have a pearless chain driven one and wanna lock it ? Any ideas how . It’s setup totally diffrent
I'm converting a John Deere 180 Peerless 801 over to a Peerless 820. How do you modify the shift linkage to work with the new transaxle?
Where do I get those lug nut hub from
How do you indetify what diff you have I've got a dayton mtd 1644 not exactly sure on the year but the diff has a vertical pulley
those cracks on the other transaxles were they done by hitting a rock or they just broke?
those skip plates can you buy them? or can you just put a steel plate around those transaxles?
Question, do you know what mowers these would be in? Because I keep Breaking my transmission and i'm having trouble finding this one
What's the holy grail of hydrostatic with 1" axles? Is there one with 1" axles?
Do you have a video on the 5 lug hubs
I have a craftsman 5100 and my hydraulic trans is not working. Can I use a different trans on my riding mower. I want to find a used one and see a lot of craftsman 3000 for sale with used parts
Haven’t gone through any yet so I’m gonna swap one of these in before I do, and I’m running a hydro rn and would like to not be
where do you have to buy the cheapest good 820 ?
I have a old ford yt125 with a peerless, iim not sure.what model, its a 5 speed,, Im putting. a 18hp vaanguard. on it, the old ford trraactors have kick ass frontt axxles and spindles, im building a racer out of it
I'm building a mower with a solid live axle and peerless 700 series transmission. Have you guys thought about that, as opposed to a transaxle?
@okoffroadmowers
2 жыл бұрын
We don’t get very many or any mowers with the 700 series We have so many ideas for mower builds but sadly where we are located we don’t have many with all these different and cool parts on them Gunna have to make a trip down the the states to grab some of our dream builds
@nameyourchannel7844
2 жыл бұрын
@@okoffroadmowers - Makes sense. I have three mowers, and my older smallest one happened to be the one with the 700 series transmission. The others have transaxles. But it turns out these transmissions are what a lot of the race mowers use. Not quite finished yet, so right now I'm hopeful it'll hold up. Keep up the good work!
Would you happen to know the part number for the 5x4.5 trailer spacer?
@okoffroadmowers
2 жыл бұрын
Check princess auto website!
66 mph crapsman mower I spent zero dollars on ! Bottom line run a GT axle LT (lawn tractor) is lighter duty (GT) (garden tractor) were built for implements and attachments/work horse . Lawn tractor is for what it sounds like mowing a lawn lol. Simply put a 4-5 inch pulley on front and 1-3/4 to 2” rear pulley . Weld up a quick idler pulley and go . Done . Never put big atv wheels and tires a on it waste of time lol Imo trussing it is one thing but building a whole “fitted” skid plate little much for a racing mower lol Great job none the less js u can do it 0$ budget and absolutely rip!
@okoffroadmowers
Жыл бұрын
This is not for a racing mower, it’s for an off-road mower A 1-2” pulley is way to small and would cause so many belt slipping issues Skid plate is well worth the time as we don’t have many 820 transaxles in are area and wouldn’t want to damage the casing on a rock We don’t mind spending some money on a hobby we really enjoy!
Do you guys run gear oil or grease in these 820s?
@okoffroadmowers
Жыл бұрын
A thick gear oil works great!
What mowers did the 820 come on?
@REVNUMANEWBERN
3 ай бұрын
That WOULD be a GREAT aid !
Wheel horse 8 speed uni-drive w 1 1/8 axles are bullet proof
@okoffroadmowers
Жыл бұрын
Yessss We wish we got wheel horse mowers in our area, Maybe have seen 1 good one that we could have bought, but seller was asking way to much money! One day we will make a trip to the USA to buy some horses!!
Where you get the wheel spacers
@okoffroadmowers
2 ай бұрын
They are jeep 2” inch heel spacers 5x4.5 bolt pattern
Where do you get the wheel hubs?
@okoffroadmowers
2 жыл бұрын
Princess auto
@redneck_auto_tech
2 жыл бұрын
@@okoffroadmowers ill look into it
@johnwoods6256
Жыл бұрын
@@okoffroadmowers I saw the weld on hubs but can't find the 5 lug plate that it welds to. I've looked online at princess auto still no luck. Could you please get a part # or a sku it would be much appreciated 🙏
@okoffroadmowers
Жыл бұрын
Look up “drive plates” on princess auto website you will be able to find what your after!
You should buy an old john deere 314 or 317. The transmission are tough . Check it out.
@okoffroadmowers
5 ай бұрын
When we find one for a good price I’m sure we will pick it up and add it to the build list
Why do you put a cover on the top of the diff
@okoffroadmowers
2 жыл бұрын
For added strength to the top of the case With having a welded diff The two axle shafts put a lot of pressure on the top half of the case as they are trying to push upwards in the middle. Also added it as the mounting bolt holes are only 5/16 and I wanted bigger bolts Watch the magnum rebuild and you will understand what I mean!
I need riding mower help can you help me plz