Hey man, u have on side where the handles are, a hex screw. When u loose it, on rail u can slide the drill. Try it, best regards

@prestigemanufacturing2611

9 ай бұрын

Awesome!! Thanks man. I’m definitely going to try that. It definitely needs tightened back up.

Just USE the knop at the otter side, If you put the slide at the higest stand, lock the knop, then you see how much space you have !!! No need to need these welding tubes!!!

I have had great luck with vevor products buying directly from their website. Fast shipping. Good stuff. I actually was just looking at the mag drills. I was gonna get an evolution sense I have few of their saws but Vevor is 1/4 of the cost. After watching your video I’m gonna try a vevor.

@prestigemanufacturing2611

8 ай бұрын

I’ve had pretty good luck with them also

Just ordered one of these drills but without the quick connect. The term is "Nitto one touch" for peopie looking for new cutters. And lije others saud, the screw head on side lets you get more upward travel fir drill bits

@prestigemanufacturing2611

6 ай бұрын

Awesome!

P.s. sorry some has the knop ; you have to lisen the LN- bolt.

Like nails on a chalkboard watching you use this annular cutters without cutting fluid. Annular cutters are expensive and easy damaged or dulled. Proper use of cutting fluid will double their useful life.

What the other commenter meant is you can adjust the height of the drill to accommodate the jacobs chuck and regular drill bits. This is to not have to build the stand that you built. How do you like the quick connect? Any play in it? Great review man.

@prestigemanufacturing2611

8 ай бұрын

Ohhhh… lol. I definitely have to try that because that’s just about the only thing I don’t like about drill. The quick disconnect works great. There’s no play in it at all. Thanks for the support!!

One thing you could do sense HF bits are so cheap. Just cut them down and re sharpen them. I have the drill doctor it definitely works on HF bits after they break.

@prestigemanufacturing2611

8 ай бұрын

I wasn’t sure if annular cutter could be sharped with a drill sharpener

I'm in the market for a mag drill to punch some holes in a truck frame on an upcoming project. My biggest concern with these cheap ones is if i can buy SAE size annular cutters to work with the Chinese spindles. Everywhere I've read seems they're metric. Do you know if these vevor drills are that way?

@prestigemanufacturing2611

6 ай бұрын

The annular cutters that came with mine are standard I believe and I ordered some from China that are standard since. I made a video about them. Check it out. Thanks

You realize you can move the head up on the mounting plate picatinny rails to use longer drill bits, right? You have it mounted in the lower 3/4.

@prestigemanufacturing2611

7 ай бұрын

I actually didn’t realize that and a couple people have told me since. Thanks for the help I appreciate it!

There is a screw on the side that allows more travel.

@prestigemanufacturing2611

8 ай бұрын

I’m definitely going to try that. It’s the only downfall I see with this drill press