You Could Live In This 3D Printed Home
Ғылым және технология
It's not every day we get to see a fully finished 3D printed house but it this video we see a bunch! Tour through this completed 3D printed home with the Founder of Hive 3D himself Tim Lankau in Brenham Texas and Round Top Texas,
Find a Job via Human Robot Army
humanrobotarmy.com
“How to 3D Print a House” Course
automate.construction/course/
Automate Construction Podcast
/ @automateconstructionp...
Follow on Social Media
Facebook - / automateconstruction
Linkedin - / 81956758
Reddit - / automateconstruction
Twitter - / jarettgross
Instagram - @automateconstruction
/ automateconstruction
TikTok - @automateconstruction
www.tiktok.com/@automateconst...
Home Listing
s.hartech.io/m6FTtak3Sh8T
Пікірлер: 181
Sign me up I am ready to get into this industry I have 30 years construction knowledge
@automateconstruction
Ай бұрын
Please submit your resume via humanrobotarmy.com
@rodrigoarayafritis7849
27 күн бұрын
Hermosa, Pero sin armaduras de acero, con un sismo ........
@waltbertralu8232
21 күн бұрын
@@automateconstruction ICON 3D PRINTING? AUSTIN,TEXAS? ... I WORKED WITH U IN NACAJUCA, TABASCO..
@occa7941
19 күн бұрын
Like how much costs a 3D printed house?
@carlosangarita6009
15 күн бұрын
Usted es ingeniero civil ? O ingeniero estructural @@rodrigoarayafritis7849
Uhh counter this video : 643 Uhh counts per min:53.5 Uhh counts per hour:3,215 Uhh counts per day: 51,440 Uhh counts per year:18,775,600 Thank me later thought I’d save us some time Counting
@lou09
25 күн бұрын
Got me fucking dead!
@cameronmurphy6701
25 күн бұрын
I was looking for this comment!
@degenerate-GEEZER
17 күн бұрын
Uhhh
@diegohernandezx6292
16 күн бұрын
Lmao thank you saved me the time 😂😂
@RimWulf
13 күн бұрын
I counted 112 times he used a speech modifier.
Surface mounted plugs and switches are ugly
@michaelellis3091
23 күн бұрын
Agree! If that's the plan, there are more attractive alternatives!
@michaelascullion9473
20 күн бұрын
They can make the gutters flush but not the light switch cables?
@estebencampos146
14 күн бұрын
Right..! They should’ve just had run PVC for the electric if they were concerned about covering the wires during the 3D printing🤦🏽♂️
@Coralu23
4 күн бұрын
@@michaelascullion9473😂😂😂
id have concerns. if grandma or who ever loses control of their car and wipes out a wall is the house a total loss? what happens when they settle. if the walls crack itll look like crap. it appears theres already a crack upper right corner of the garage door. its a cool concept but i wonder how theyll hold up 5-15 years down the road. i guess you could sheet rock over if you wanted to remodel. the outlet and conduit reminds me of a 1980's face block commercial building. just my opinion. opinions are like buttholes everybody has one. im just not sold on it. i like my traditional stick built full brick with the warm feel of harwoods and carpet. guess im old fashion.
@BirdFromYakiVegas
23 күн бұрын
We'll never know till it comes to that time! Hey say it'll last forever, but tome will tell
@Cynthia-ru9mj
20 күн бұрын
The man will probably say, "Don't worry, mam, we'll print you up a new one. " 😂
@gcasag
16 күн бұрын
It already looks like crap
@Coralu23
4 күн бұрын
I agree with you on the wiring and outlets. It looks bad...but I also feel that today's construction sucks and new ideas need to be tried if we want a change. The exposed wiring and outlets is a small sacrifice esthetically hopefully it was worth it got the sturdiness of the construction
As an electrician, all of the pipe in a house just looks completely weird, of course I know why it had to be like that.. I wonder if it’s a nightmare wiring a house like that and if it costs a lot more due to all of the extra time for piping. Beautiful home though!
@joewebb9518
25 күн бұрын
I was having the exact same thought. Before adding the the foam create in the middle of the walls, they could have left holes for dropping down metal conduit to each socket and switch. Put in plenty so it will never need additional sockets in place. They could even mount in the back boxes as they go along. Looks too industrial having them external
@joewebb9518
25 күн бұрын
Just noticed the last one might have done this
@ojeeseogy5597
24 күн бұрын
Yaa i also think the same. Usually I'll drill 1'1/2' depth lining into the wall for wiring purpose
@BirdFromYakiVegas
23 күн бұрын
Well we'll never know until it comes that time!
@sherwinalvarez7365
9 күн бұрын
I saw the mini split and was wondering how they ran the bundle, line set, communication wire, and condensate tubing. I think all the trades are wondering how theirs is ran.
Why electrical outlets and switches are outside the wall and not inside hidden like normal homes ?
@randomtricksvideos
27 күн бұрын
Look at icon - different printing company that has electrical inside
@fog1257
27 күн бұрын
Because it's easier to build this way. If a cable breaks you don't want to break the wall to fix it. Normally however you would run that cable through a pipe integrated in the wall.
@crypto1990
22 күн бұрын
Only thing I don't like looks great though
THANKS JARETT,FOR SHARING TIM’s WORK IN PROGRESS…LOVE THE DRONE FOOTAGE AND I SAW 👀 A TESLA IN THE BACKGROUND 🤗😎💚💚💚
@automateconstruction
Ай бұрын
That’s mine, I got it a little over 2 years ago when gas was $4 a gallon and I’ve driven it 109k miles around the country!
Thank you for the video please keep it going!!!
I really like the hallway with that accented wall! With the waviness!
really impressive and styled very nicely. i think you hit it out of the park on your design choices and your use of the technology.
Some great ideas here. Very nice work.
@timothylankau4843
Ай бұрын
We appreciate it!
Awesome showcase of what can be done with 3D printed homes! Love the look ❤
I’m waiting for homes with printed roofs. Want an air/water tight space.
Looks good!
@timothylankau4843
Ай бұрын
Thank you!
Cool idea. Looks neat. Personally, I would like the electrical hidden in the walls. To spend that kind of money and have to see conduit, ehhh. But everyone has their own style.
I like the concept, I’m glad you mentioned that it’s not mean for permanent use/living because I don’t like the way it looks 3D printed I’m no tradesman but I really feel like that concrete could’ve been smoothed out as it cured and left alone in certain areas to remind people that it was 3D printed but aesthetically it looks kinda off putting.Other than that nice house
@mrs9848
17 күн бұрын
Inside walls should be smoothed off, but leave the printed look outside
@BabyWavv
17 күн бұрын
@@mrs9848 exactly, it kinda gives off a industrial look which everyone might not like yaknow
Absolutely great and innovative! I just wonder if there is any way to recess electric part? Or overall outlets to be accessible but still hidden from a sight?
Uh.... Uh... Uh... Uuuuuuh. 😂😂😂
The switches will remain like this?
Love it
Beautiful, one of the best 3D printed homes to date!
@timothylankau4843
Ай бұрын
Thanks so much!
@Poklaz1
29 күн бұрын
Do you usually date 3D printed homes?
Could they have left holes for all sockets and switches, then run metal conduit inside the walls prior to filling with foam crete.
It’s uhh nice uhh but uhh the only uhh thing I uhh don’t like uhh is the uhh surface mounted uhh conduit
Quick question how are you going to fix your plumbing
So has anyone tested your mixture for arsenic or hexavalent compounds or chromium
You need some one who don't say "ehhh " in each 30sec
Hi what's the advantages of flyash over cement? Impressive project
Id the electrical wiring on the first floor all exposed?
So whats the cost range of these so cakled homes?
How easy is it for the person who live in the house to fix a leak or do they have to hire someone special to fixes it. I know this house could never/ well never have a problem where you have to go into the wall to fix it.
Id look at using a plasterers trowel to give the interior a flat finish for a more practical use ie plug sockets wall mounted stuff ect but the outside looks really cool 😊
700k??? Fraking Ay
We are looking to build a custom home in north Dallas - Denton County. Very interested by the 3D printing and would like to reach out to the builders featured in this video. Can we get the details please.
House is good really big
Also it like someone who was into brutalist style and made the house but then a minimalist moved in it’s like all white walls where you could have played on the concrete walls to bring out the house the way they designed the house was trying to match a regular house regular modern house with sheetrock and regular walls where you could’ve done a more brutal style playing on the concrete and the natural materials adding plants adding maybe even marble countertops just playing on that dark gray that concrete is known for
Beautiful house. Too bad we didn't get to see all of it. The videographer could use some work lol
@automateconstruction
13 күн бұрын
Usually I’m filming construction sites not real estate agent style home videos I’ll keep that in mind next time and watch some real estate videos in advance.
@aryalc.h.5812
13 күн бұрын
@@automateconstruction, I get. Was just kidding, though. I hope I didn't offend you.
@automateconstruction
12 күн бұрын
@@aryalc.h.5812 Never I love constructive criticism! It's a sign of respect!
The Windows are cut after?
Don’t get me wrong I love the build extremely impressive‼️ Only thing is why surface mount the electric it hurts my heart to see this fuckery as a sparky myself🥲I woulda jus ran PVC stub outs
How do you paint a house like this?
exposed conduits, flushed gutters
Awe-some! Great job - Well done.
@timothylankau4843
Ай бұрын
Thanks!
Would 3D printed homes be good for coastal areas? Seems like they’re pretty strong.
the concrete surface bothers me, can it be smoothed out.
My gripes, The walls would be a nightmare to clean with all the nooks and crannies. I worry about the strength of the walls if you have to drill something into it, I feel it might crumble like mortar. No waves which is not only ugly but will make the house hotter and the seals more prone to leakage around windows and doors. Finally, aren't there laws over there about the pool needing to be fenced?
@gaylengurr3911
Ай бұрын
the lot is fenced
@smally8499234
Ай бұрын
@@gaylengurr3911 I'm not concerned about the lot, the law in my area states: All pools must be fully enclosed by a barrier that is at least 1200mm in height, barriers can include fencing or walls. The bottom of the pool fence and gate must be no more than 100mm off the ground. If the horizontal rails are 900mm or more apart the verticals cannot exceed 100mm apart and the gate must be fitted with a child safe approved latch no less than 1400mm off the ground.
@jacks1bonnielass
25 күн бұрын
@@smally8499234 It varies from state to state, city, county etc. lol I mean I thought that was obvious. Here in rural west TN, you can have a pool right at your back door, doesn’t matter, no fencing. Or put it in your driveway or in the middle of a cow pasture lmao no one gives af. We don’t have city code or ordinances here. They don’t tell us what we can or can’t do on our property!
Most Other 3D printers are putting the electrical Into the walls there should be plenty of time to lay all the wires inside the walls and then put the insulation in why wasn't this done?
@timothylankau4843
Ай бұрын
We put the electrical in the walls in most of our houses this was a design choice here.
@user-hg6vd2iz7m
Ай бұрын
i prefer the exposed conduit
@markvickery5894
13 күн бұрын
@@user-hg6vd2iz7myou’re in the minority
allright i from Poland ;-) i see electricy are on the walls, all looks modern. How much this House cost? I mean the house with all windows, isolation ect like in movie without a plot. More than 2 000 000 Dollars?
@Meltn6876
10 күн бұрын
He said $719,000.
I am really not liking the exposed conduit everywhere. Really gives off that old basement vibes.
How many times did you move the printer for this large print
@timothylankau4843
Ай бұрын
For this one we used a gantry that we moved twice. For the smaller ones we were using our smaller printers that we move many times, but they are on wheels so there is no set up time and they just move around while they print.
@yuxiangluo3464
Ай бұрын
@@timothylankau4843 put them on wheels, that’s awesome! You guys did a great job, I am impressed, the wall patterns are just mind blowing 🤯
Can basement level foundation be 3d printed??? 🙋🙋🙋 & This has to be one of the best roofs I've seen on a 3D printed home
@automateconstruction
Ай бұрын
I don’t like to make claims before I’ve seen them happen in person but in theory it would be possible with an extended extruder
@moneysignclubboss
Ай бұрын
@@automateconstruction IF YOU CAN GET A BASEMENT LEVEL OF 9 TO 9.5 FT ON A CONCRETE PRINTED HOUSE &/OR EVEN A INGROUND POOL LIKE THE GUY HAS HERE !!! ☝️ THE POSSIBILITIES OF LIVING SPACE AND LIVING QUARTERS OPENS UP TREMENDOUSLY!
@timothylankau4843
Ай бұрын
Hi, yes we have a design we are considering for basements. We would drive our printer in and then build the dirt back when it's finished...
@moneysignclubboss
Ай бұрын
@@timothylankau4843 🤔💡☝️ THINKING CAP ON
Which bins at IKEA do I need 🤔 👀
Looks like a warehouse from the inside.
As printer was a CyBe robot used?
@automateconstruction
Ай бұрын
No, they worked with Andrej Rudenko
Iits a good idea but theres a reason why there are frames hurricane braces straps eves and everything else you skipped over dose it even have a basement or a foundation
@Meltn6876
10 күн бұрын
He said the walls are monolithic.
Quando a pessoa tem talento é fod@
i like the house do u print small apartments?
@timothylankau4843
Ай бұрын
Yes please see the little houses at the end of the video.
Electric fittings poking their face out on walls 😊.
Can people hire you guys to build as well as help in designing
And why not a concrete slab for the roof and or structurally insulated panels And minimize the use of wood
@timothylankau4843
Ай бұрын
We use SIPS on most of our new houses.
you should move into it
It's basically a Mexican style home. This is exactly how they design.
Where is Danny?
Cant mount tvs can hang pictures or blinds😂😂
@automateconstruction
8 күн бұрын
Uh, concrete screws been around a long time you’ll be fine
The electrical is the only thing I don't like
bro this the first level in hitman 2
@automateconstruction
25 күн бұрын
No assassining in the 3d printed building please
Can a 3d printed house have a basement?
@timothylankau4843
Ай бұрын
Yes it can be done.
I would buy the 75k house for sure, let me know
@automateconstruction
27 күн бұрын
The team put so much blood & sweat into that one the owner made out like a bandit. Next time it will cost more. They learned a lot so all said and done it’s still a win win.
house prices these days are complete BS. Reminds me of what happened in Japan just before they crashed into the Lost Decade.
Uhhh and uhhh. Wasn't that one of the first rules we were taught in primary school for presentations?
Every 3rd word this guy says is “uhh umm ahh”
@automateconstruction
Ай бұрын
Cut the guy some slack this is 6pm after a 10hr day
Hello Jarett I would like to inform you that I have a great idea about this beautiful industry. I hope to communicate with me for further discussion. Thank you.
@automateconstruction
Ай бұрын
It would probably be more useful to share your idea with a company that can implement it but I am happy to speak with you. Reach out on my website I’ll see it same day.
@Hammam2027
Ай бұрын
@@automateconstruction Ok thank you
$719k for that house "Outside of Houston?!?" 🤣🤣 Yeah, I'd rather make a cob house
@tf5pZ9H5vcAdBp
Ай бұрын
An acre and a half with a 3k sq ft house that's a steal. You couldn't do better.
@ktrainbow9765
Ай бұрын
@@tf5pZ9H5vcAdBp and that's why no one will buy your house. You think it's a "steal" 🤣🤣
@timothylankau4843
Ай бұрын
Hi. The acerage, pool, and landscaping on this home is worth over $220,000, so it is priced below market. Comps are 800 plus in the area. The little houses at the end of the video are less expensive 45k-85k.
@ktrainbow9765
Ай бұрын
@@timothylankau4843 hi. When I lived in Southern California my grandparents $30k 3 bedroom 2 bathroom house was "worth" $2 million in 2015. Do you really think a 1950's house is "worth" $2 million? It's not. And you are a foolish person if you purchase a house when it's not worth what you paid. Having a house on the "outskirts" of a large city where the houses in the city are $290k or more where the person doesn't have to travel from the "outskirts" to reach their job and stores is gonna drive up your cost in gasoline, convince, time, and you might have an issue with charging your electric car to make the round trip. Do whatever you want, but that house is not worth 3/4 of a million dollars.
@jacks1bonnielass
25 күн бұрын
Exactly lol it’d only sell for about $350k in west TN. I found WAY too many places on the interior walls that were completely uneven and looked goofy. Exterior too on the smaller units. Overpriced garbage that will fall apart and begin to crack in less than 10yrs. I appreciate the fact they’re trying something new, but there are still true craftsman in the trade who do breathtaking work by hand. I’d rather have our brick home here on our farm (built in 1961) or our new log home we’re gonna have built in about a year ANY DAY of the week! Our log home will cost ~ $502k turn key, 3080sq ft. It’ll be built on the back of our property, 3 stories including the basement, and also have a garage. It being custom obviously costs a bit more than their usual builds. We’ve already done our blueprints. It also helps that we’re getting a family discount 😅
Would you or have you ever considered raising money via an IPO? That way average folks could get in on the action.
It'd be great if the walls didn't look like stacked shit.
What’s the price on something like this ??? Very interesting
@automateconstruction
Ай бұрын
700k
Take a shot every time he says "uh"
@automateconstruction
24 күн бұрын
The guy went to med school and law school, runs a law firm on the side and is also founding Hive 3D. I caught him at 5pm after a long day cut the guy some slack.
@resultsofchange
24 күн бұрын
@@automateconstruction must be new to the internet. Nobody is being serious about the 2.5mil uhs.
Uhmmm great uhmm house uuhhhhm. Good uuhhhhm job uhhhm guys uhhhhm
@degenerate-GEEZER
17 күн бұрын
I couldn't even watch the video with ahh ahhh ahhh ahhh
Do they have a phone number ?
Uh … uh …. Uh …. Uh .. uh .. uh …uhh
我觉得房屋里面的内墙可以这样子,外墙需要抵挡自然恶劣环境,还是钢筋砖头好,
Uhhhhhh…. Uhhhhh. Uhhhhh….uhhhhhhhh uhuhuhuhuhuhhhhhhhhh😅
Uhhh
Ok is it just me or does anyone else thinks this house has a TERRIBLE interior…yes well done on hiding the gutter, and all the interior electricals look like a Victorian conversion with retrofitted electrics… 🤮
He says “UHH” wayyy to much
It’s great to see more and more 3D printed homes, but if I was honest this home is lacking character, some parts of it look dated and vanilla already. It’s lacking a lot of aesthetic appeal.
good house .. no eaves is a terrible failure on the part of the designer, the builder, the architect and the law. That shit WILL leak.
@frikkied2638
Ай бұрын
Always an armchair worrier that feels they have to criticize, even when they don’t have any insight into the actual design details.
@Obtuse94
27 күн бұрын
I mean, they are right though, no eaves/roof overhang is a huge oversight that will impact the longevity of this house.
@Senwot2000
23 күн бұрын
@@frikkied2638but you notice the smaller ones had eaves. So, they know that big house was done incorrectly.
@cottonbrad
22 күн бұрын
In the first minutes he explains why. The gutters and eves are incorporated. No overhang.
@ericwogbe
20 күн бұрын
If you notice the roof and the gutters are integrated. Great design in my opinion seeing how it's a seamless approach
👁️--👁️ uhhhh uhhhhh bro get a professional to tour the home and relax your eye lids
Umm...uh... Huh... And. Lip smack.. so many times
His intelligence is equivalent to the amount of Ugh’s he says
Dude! Work on saying “Uh” less please.
Ate we all looking at the same house???? It's AWFUL !! ! ABSOLUTELY AWFUL
Waste of time and money
@BirdFromYakiVegas
23 күн бұрын
How?