How to complete a REDNECK repair of your Yeti Soft-Side Cooler when the zipper(s) break.
Жүктеу.....
Пікірлер: 47
@genekim2748 Жыл бұрын
This is exactly what I needed. Thanks so much!
@pepawg22812 жыл бұрын
If it's a plastic zipper you can melt the teeth together to prevent the slide from moving past that point.
@UTRansomNotes Жыл бұрын
Worked for me as well. Gonna cover the gap in goop or rubber cement and see how well that protects the seal. Better than dropping another $250.
@chrismeans6750 Жыл бұрын
That was GERAT. Gonna use it on my baseball gear bag. THANKS!
@jroblesart Жыл бұрын
i fixed mine without taking out the teeth, i just greased it and snapped it back in place the same way it came out
@jean-francoisgalipeault10379 ай бұрын
Brilliantly done ! Thank you
@ElectricScooterMan11 ай бұрын
This is better than using thread and needle. I did fix my battery bag for my scooter. I can leave a small hole for battery to cool down faster
@ddemonjjv2 жыл бұрын
Good deal, works for me. Thanks.
@jayryan7473 Жыл бұрын
This is why yeti anything with a zipper is so expensive: you're paying for all of the future repairs.
@tbreezyy1002 жыл бұрын
Yep. Tried to fit too many beers. Lol. Saw the beadlock wheel in the back and knew how it happened instantly. Thanks for the idea.
@mannyg9059
2 жыл бұрын
In my neck of the woods, We get a plastic bag, put the Yeti cooler in it and tie a knot " You just have drink the beers in it a little sooner"
@ReligionAndMaterialismDebunked
2 жыл бұрын
alKILLhol, in the fake drug war.
@samirakhalili9167 Жыл бұрын
thats actually so smart
@keastway Жыл бұрын
nice - thanks!
@user-ei2xc5id4zАй бұрын
thank you sir
@AaronNovak110 ай бұрын
If they don’t honor my warranty, I may have to try something similar to this.
@stevenlight89293 ай бұрын
Couldn't you find a light blue zip tie?
@timcoonen88202 жыл бұрын
Works great! But instead of zip tie just jb weld the end.
@pepawg2281
2 жыл бұрын
JB weld is a garbage product.
@Isabella-qg6lo Жыл бұрын
This doesn't work one because my thing doesn't fit through it and two I made the bag even worse by doing that because mine didn't fit and every single time I try to put it in it would just fold
@davidmckenzie2042 Жыл бұрын
Thanks man I appreciate you video
@kgm21826 ай бұрын
Someone makes a whole replacement piece for Yeti zippers called a Zzepair.
@danharrison28809 ай бұрын
How do you prevent the teeth from opening back up behind the zipper
@valevisa8429
4 күн бұрын
Apply some pressure with pliers on the zipper mechanism.
@channelberbagiinformasi58 Жыл бұрын
👍
@WilsonsAntonysince11 ай бұрын
❤
@happycampa12 жыл бұрын
Doesn't yeti warranty this?
@mannyg90592 жыл бұрын
The MacGyver fix. Why spend a dollar on a ten cent problem? I like the way you think. If you want to "make it look pretty" just match the tie color to the bag.
@ReligionAndMaterialismDebunked2 жыл бұрын
Instead of sewing. Hehe. One lady did sewing.
@KryptedKaiАй бұрын
all i needed was hands
@kingropplebopplesoppy26342 жыл бұрын
why not just glue that part of the zipper? Why cut new holes in it? The glue should stop the zipper from going into the area where there is no teeth.
@OneBigAssMistakeA
2 жыл бұрын
Also an option...in the end having to repair multiple times is only a zip-tie away.
@mannyg9059
2 жыл бұрын
Oops, too late for that, Add glue to the holes created by the tie instead. Ha-ha-ha.
@apo11572 жыл бұрын
thailand
@mannyg9059
2 жыл бұрын
I see your Thailand and raise you Cambodia and Vietnam. "Hey wait a minute, this is not a Poker game, my bad"
@DavidHartlinGuiding5 ай бұрын
Or you could send it back to Yeti and they will replace it
@JimBairdAdventurer9 ай бұрын
Good but not waterproof anymore so not for a Yeti Panga dry bag
@kgm2182
5 ай бұрын
You mean still not waterproof. It wasn't waterproof when he started.
@playwithishan58212 жыл бұрын
M.l
@manny9561 Жыл бұрын
Yeti will replace that real quick just do a claim and they will send you the m30
@29rca
Жыл бұрын
my claim was not honored f yeti. never again
@jbrigham377 Жыл бұрын
You ruined your yeti in order to fix it. Not a helpful video at all.
@kgm2182
5 ай бұрын
It was ruined to begin with? He turned an enormous hole for a tiny hole.
Пікірлер: 47
This is exactly what I needed. Thanks so much!
If it's a plastic zipper you can melt the teeth together to prevent the slide from moving past that point.
Worked for me as well. Gonna cover the gap in goop or rubber cement and see how well that protects the seal. Better than dropping another $250.
That was GERAT. Gonna use it on my baseball gear bag. THANKS!
i fixed mine without taking out the teeth, i just greased it and snapped it back in place the same way it came out
Brilliantly done ! Thank you
This is better than using thread and needle. I did fix my battery bag for my scooter. I can leave a small hole for battery to cool down faster
Good deal, works for me. Thanks.
This is why yeti anything with a zipper is so expensive: you're paying for all of the future repairs.
Yep. Tried to fit too many beers. Lol. Saw the beadlock wheel in the back and knew how it happened instantly. Thanks for the idea.
@mannyg9059
2 жыл бұрын
In my neck of the woods, We get a plastic bag, put the Yeti cooler in it and tie a knot " You just have drink the beers in it a little sooner"
@ReligionAndMaterialismDebunked
2 жыл бұрын
alKILLhol, in the fake drug war.
thats actually so smart
nice - thanks!
thank you sir
If they don’t honor my warranty, I may have to try something similar to this.
Couldn't you find a light blue zip tie?
Works great! But instead of zip tie just jb weld the end.
@pepawg2281
2 жыл бұрын
JB weld is a garbage product.
This doesn't work one because my thing doesn't fit through it and two I made the bag even worse by doing that because mine didn't fit and every single time I try to put it in it would just fold
Thanks man I appreciate you video
Someone makes a whole replacement piece for Yeti zippers called a Zzepair.
How do you prevent the teeth from opening back up behind the zipper
@valevisa8429
4 күн бұрын
Apply some pressure with pliers on the zipper mechanism.
👍
❤
Doesn't yeti warranty this?
The MacGyver fix. Why spend a dollar on a ten cent problem? I like the way you think. If you want to "make it look pretty" just match the tie color to the bag.
Instead of sewing. Hehe. One lady did sewing.
all i needed was hands
why not just glue that part of the zipper? Why cut new holes in it? The glue should stop the zipper from going into the area where there is no teeth.
@OneBigAssMistakeA
2 жыл бұрын
Also an option...in the end having to repair multiple times is only a zip-tie away.
@mannyg9059
2 жыл бұрын
Oops, too late for that, Add glue to the holes created by the tie instead. Ha-ha-ha.
thailand
@mannyg9059
2 жыл бұрын
I see your Thailand and raise you Cambodia and Vietnam. "Hey wait a minute, this is not a Poker game, my bad"
Or you could send it back to Yeti and they will replace it
Good but not waterproof anymore so not for a Yeti Panga dry bag
@kgm2182
5 ай бұрын
You mean still not waterproof. It wasn't waterproof when he started.
M.l
Yeti will replace that real quick just do a claim and they will send you the m30
@29rca
Жыл бұрын
my claim was not honored f yeti. never again
You ruined your yeti in order to fix it. Not a helpful video at all.
@kgm2182
5 ай бұрын
It was ruined to begin with? He turned an enormous hole for a tiny hole.