I originally found your channel when I needed help getting started with my T-Display S3 Long. I really appreciate your tutorials and narration style. Can’t wait to watch your SquareLine Studio tutorials!

@VolosProjects

Ай бұрын

Glad to help! Thank you:

Looking forward to your SquareLine Studio tutorials 👍

Can't wait for the tutorials. Your videos always inspire new project ideas!

@VolosProjects

Ай бұрын

Glad you like them!

Great explanation as usual. The ESP32 Cheap Yellow Display Board - CYD (ESP32-2432S028R) would be great as target for your totorial.

square line tutorials with the cheap yellow display would be epic :)

For your tutorials, please use the CYD, Cheap Yellow Display. ESP32, touch screen are the important parts, but it is easy to find, flexible, and cheap.

I have looked at SquareLine Studio in the past, but I didn't have a UI project in mind. Some of the tutorials getting the ESP32 with touch display seemed complicated so I decided to hold off. If you can make a decent tutorial, it might help me with a future project. Thanks!

My man! Good job. I can't wait till for the tutorials. Like I suggested before, please make tutorials where the screen controls some thing like a motor, rpm or relay. Or receives sensor input to display like RPM, temps. and so forth. Your videos are very informative and super inspirational! Thank you for doing what you do.

@VolosProjects

Ай бұрын

Thank you man. I will try.

@sandrarocha2436

Ай бұрын

Yes please! If it is possible add the data record in a SD Card 😊 and/or a web interface. Thank you!

Thank you very much! Great and informative video. Keep up the good work! :)

It's awesome to see this channel growing in subscribers. I love seeing all the gadgets Volos comes up with.

@VolosProjects

Ай бұрын

More to come! Thank you :)

3 YEARS ASKING FOR THIS, THAAAANKS

@VolosProjects

Ай бұрын

hahahah, your time has come :)

@em-tek

Ай бұрын

@@VolosProjects Mine too... 🙂

Thank you for telling us about this. I intend to give it a try

Good idea for video series! Thank you.

I would like to see how to use SquareLine studio to program a LilyGo T-Display and PlatformIO under Visual Studio Code. I have tried to design some basic things using this software, but I got a little confused when I had to export and manually copy some libraries to my project (maybe I did not understand correctly what to do). About the project, anything simple to show the basic steps to start a project from scratch and upload it to the board. That would be much appreciated. Thanks and congratulations for what you do.

@vzerodonuts7949

Ай бұрын

Would be awesome, i also tried me with an esp32 s3 round display an wanted to connect it with my phone to display music Navigation and weather on the small screen but dont know where to start :/ …. At least i found this amazing Channel

Thanks for all the great videos, I found your channel from the ones for the M5 Stick/Stack. A tutorial for using the "Cheap Yellow Display" for Squareline Studio would be great, and for me personally with it being aimed towards MicroPython.

More t-display-long examples and tutorials would be very appreciated ❤

Keep going! I have also just decided to use Squareline w/ LVGL for UI for a small 128x64 OLED. I was writing all code manually but very time consuming and frustrating as LVGL changed version (and code) often.

This is the series I was hoping you would make! T-Display S3 AMOLED is a great unit that I would like to use for my project. Thanks!

@VolosProjects

Ай бұрын

Glad it was helpful! Thank you:

About time! I wanted to show you how to use SquareLine a while back. I've never been one for making and editing videos however and got too frustrated in the process. I guess I'm getting old(er). My coding is nowhere near your level and my biggest issue with SquareLine was that I could spend an hour or a few making great ui's but they never worked once uploaded. Everything was there but touching the screen or clicking buttons never really done more. I thought I would have to edit the code also which after looking at it, was an absolute nightmare. I guess now you will teach me. If you had any idea just how much I have learned from your videos you would be astonished. I have a full lab with everything one would need equipment and component wise. I'm stocked to the teeth with dozens of micro controllers, More LilyGo boards than a normal person could ever need and missing the knowledge hehe. I'm getting there though. Thanks again!

@VolosProjects

Ай бұрын

Tnx man, i glad you learned lot, i hope you will more. Me to, room full of controlers and board. Sometimes is hard to decide what to use.

I would love to see you using the S3-Long

Looks great and will look into the squareline - would be great for the tutorials on the lilygo t-display amoled if possible. That would be my vote. thanks for all the great info.

It's impressive how much you can cram into a display! 👍

@AMPProf

Ай бұрын

Yep even useless blinks and numbers from Scifi

Great video and I look forward to seeing more on Squareline. To answer your questions, it would be great to stick to one or two generic, easy to get boards with a touchscreen. Anything from lilygo at a good price would work well. For tutorials, things like assigning a function to a button or assigning the rtc chip to the time on the screen would be great.

@VolosProjects

Ай бұрын

Sounds good! Yes i will try to avoid expensive boards. Tnx Mike

I would find Squareline tutorials very useful. It's something there are not very many of and the software is advanced so watching somebody show off how to do stuff would be beneficial for sure.

Maybe starting with the popular ILI9341 Touch screen display? Thanks for sharing!

Looking great as always! Any Chance you could revisit the lilygo T-display S3 long with squareline? I believe nick posted a working lvgl odometer example but I for one have had alot of black screens trying to adapt it myself... Cheers

I have not used Square Line Studio yet, but I did a few projects using Nextion's display programmer thing. It does have some nice speed advantages in both development and execution, but the major drawback is the hassle of uploading the new code to the display each time I make an edit. The Nextion code has to be uploaded either via SD card or I eventually installed a switch so that the display is either connected to the MCU or the programmer. So how are you uploading the display code with these Square Line displays?

Many thanks 👌

While you are on the learning curve, I would surely like to see an end-to-end from start of project to working display for a simple T4S3 SquareLine project. The trouble, so far, is that it is not supported by tft_espi. And, specifically for the Arduino IDE. I can't see going through the learning curve for IDF. Thanks for considering this request.

BTW LVGL and SquareLine Studio have parted ways. But EEZ Studio appears highly regarded and is free.

Code generators like SquareLine Studio simplify things but if you are implementing code that you don't develop and understand, you might as well buy rather than make your own projects. Getting there is most of the fun. I love your channel.

@MaxSMoke777

Ай бұрын

Amen!

@VolosProjects

Ай бұрын

yes, i agree. But belive me sqare line is just part of work. There is still lots of coding to conect evrything and to make something functional.

Nice video. For most of my projects, running my own code to draw the screen gives me the flexibility I need. But if I find I don't need as much control for a future project. I'll certainly give this a go.

@VolosProjects

Ай бұрын

Yes, i totaly agree. I love to have complete control, i all depends on project

love your vids

❤ we need our wind gauge on this

I'm learning and need an end-to-end example of a simple T4S3 SquareLine project, from start to working display. The problem is tft_espi doesn't support it, especially for the Arduino IDE. I don't want to learn IDF right now. Thanks for considering my request.

Which variant of the LilyGO T-Display are you using? That link has a dropdown with many options (V1, V2, touch, black shell, etc)...

Like always, nice video 🤗. pls try to explain how to handle libraries, as I think it will help people with less programming knowledge like me. 😇

I am looking for the simplest way to create a gauge for a analog sensor (basically, a oil pressure gauge). It looks like Squareline Studio can work for creating the actual graphics, but how do you incorporate the sensor calibration to make it all work? If you can cover that, that would be great.

Be great to see how to interface with non touch boards too. Using a combination of a rotary encoder and the two buttons on the T-Display S3 OLED would be great.

Just a thought - might you get more views if you use a an older display like the LilyGo T-Display without touch for starters?

Are you able to share the T-RGB one clock project? I have TRGB and ready struggling to do anything but the basics to come up on the round display :(

Nice video! Make videos showing how to upload code for various esp32 board models.

I currently see the biggest problem in the compiler. There are now quite a few DIY projects that can no longer be reproduced because they require very specific libraries and specific compiler versions. If something is wrong, you get error messages that you can't do anything with.

@lohikarhu734

Ай бұрын

Yes, I tried a couple of projects, and I couldn't figure out which version of wifi library, or some others, too... The ESP32 space has become a bit "cluttered", a bit "wild West".... I'm poking around with Rust, and probably try to use ST's IDE, and it looks like NXP and Infineon are trying to get good infrastructure in place, too

It would be great to use the LilyGo AMOLED device, as I don't think there's a predefined template in Squareline for it.

amazing just starting out can you do tut on ESP32 Display

Can you explain which is better? Lvgl or touchgfx ?

Can you show in details how you export the code from Square line to Arduino please?

I would say use two boards for new tutorial series. Both regular Lilygo T-Display S3 as well as the touch version. If thats not possible than may be the touch version only

This is great i like square line studios but always have trouble linking widget values to real time data a video on that would be great

T-Display S3 Long!

i would find it very cool if u choose a round 1.28inch esp32-s3 board with touch and 16MB for this project.

I will buy ANY board to follow your SLS tutorial.

Genial, esto me da una idea de por donde empezar a buscar, porque no tenía ni idea de como hacer la UI para el T-Display S# AMOLED.

cool!

I find the exported files from squareline has too much data and eats into my boards memory.

Amazing! Can you please make a LVGL tutorial from scratch?

i would love to learn to use SquareLine Studio. But would like to see a working clock with internet weather working for LillyGo displays, from touch to the non touch ones like the S3's, etc. I would pay for it as well. 🤑👍

Thanks a lot!. Are you using the free version of SquareLine Studio?

@VolosProjects

Ай бұрын

Yes

Hi!. Thank you for this video. I didn’t know about SquareLine Studio, but It seems expensive. But I will try it like most of your proyects. Could you share the code of your TDisplay S4 shown in the video?

@VolosProjects

Ай бұрын

hello, thank you Sandra. I will share that project but i still work on it, it have some isues.

Since you do these projects for customers I'm a bit surprised you still use the Arduino IDE and not Platformio. I switched a year ago and find the per project library management, multiple profiles per project, and editor features compelling. Can you comment on whether you've tried it and why you stay with Arduino IDE?

@VolosProjects

Ай бұрын

Yes i used it for more than year and than i switched back to Arduino Ide. Becouse i have more than 100 diferent board,, sometimes in week i do many diferent project with diferent boards .Arduino ide is fastest when i need switch from to another board. Also evry day i got tons mails from people who still have black screen. It is easiest for me to expain what they need to setup if we both use Arduino. Another reason is that i dont care about UI to much, in my life i made so many programs in notepad. Platform io is nice but at the end result is same. I have feelling that many people want to use platform IO becouse they heard it is better, but they shode care more about learning to code. It happens my all the time. I spend few hours to helps them to install and setup platform io and later i realized thet they are completly beginers. But this is same in every hoby, when i played guitar i wish i spend more time playing guitar. I spend most of time searcing which guitar is best.

there are also other Design UI apps out there to look at, EEZ and 4D Studio come to mind.

wt32-sc01 plus board tutorial please

Nice if you made a stock interface. Where you kan input stock symbols and have them flash green or red depending on if the stock goes up or down. Fetching stock information from Yahoo Finance.

The link to the code is missing!

That software to build screens/pages sure reminds me of the "Editor" for Nextion displays. It sure makes life easier. I use Nextion for 99% of my projects and what's cool, is I can design pages that are similar between projects, save those pages to the network, then just call them up as needed. Of course, I can then edit everything to match the current project. I wonder if this software works with an ESP32 WROOM and any display?? That would be so cool. If not, it's too bad that there's not some software similar to that which would work for an ESP32 WROOM (or other boards) and any display and still allow Arduino IDE coding. I'm not wanting to learn new code for some other board. LOL

@VolosProjects

Ай бұрын

It work with any esp32 board .Thank you.

@BlondieSL

Ай бұрын

@@VolosProjects But is the code going to be Arduino IDE code or some other code?

I vote for tlong or tpanel, looking forward to the videos.

@VolosProjects

Ай бұрын

I still waiting my t-panel, qute exided about that board.

What about using the ESP32 Cheap Yellow Display Board (ESP32-2432S028R)

@VolosProjects

Ай бұрын

I am not sure CYD is good choice for this. Older esp32 ic and no PSRAM memory.

@deadly_dave

Ай бұрын

That's fair. Nevermind, I have one sitting here that I need to learn to use properly.

Where is the code? I can't find a link for the code your channel is popular for sharing...

What about performance?. Is it the same, or not different enough to matter?

@VolosProjects

Ай бұрын

I never tried to be honest. I will in future.

@AlfieMakes

Ай бұрын

@@VolosProjects Awesome, looking forward to your benchmarks! :). I wonder if you are willing to take in client work?

@VolosProjects

Ай бұрын

Yes always ,but it depends what you need. Feel free to send me mail volos.marketing@gmail.com

The lack of a layout manager with LVGL still buggs me.

Cheap Yellow Display please 😊😊😊

Now that squareline studio has decided to part ways with lvgl and develop it as independent UI software, you start using it😂

please tutorial vs T display s3 Long pleaseeeeeeeeeeee

Can I send you a Lily Pi to use with the tutorials, that board is little ugly but is complete with SD card, RTC, relay output, 2I2C ports battery so please take a look. The hardware is very supported by ttgo and community and libraries are very completed... It also works for T-watch, is the same hardware... Ah I forgot to tell you 480x320 resolution..

the code link is blank. Did you change your mind about publish it or this just a forgetfulness?

I hope you "graduate" to using PlatformIO instead of Arduino - go industrial strength!

@VolosProjects

Ай бұрын

I used platform IO for 1 year and i quit from it. Yes it is better than Arduino IDE, but at the end ,result is same.

Please if you publish a video fix the focus of the view

@VolosProjects

12 күн бұрын

Hello Piere, but i dont understand

Lvgl stopped the cooperation with Squareline studio. It is better to start learning some of the alternatives

@MaltWhiskey

Ай бұрын

What are those alternatives?

@johnmatrixxyzzzzz

Ай бұрын

Flowcode

I never care.. Tiny screen computer Yes please..

I've been enjoying following your channel - because you didn't use SquareLine Studio. It's unsuitable for Open Source projects, so I'm always looking for alternatives. So our roads will split here - I stop subscribing to your channel and will search for somebody else who works with true open source solutions.

aaand another subscription based app... no thanks...

@RicardoRibeiro-dorcari

Ай бұрын

To which app are you referring ? Lvgl is free

@lohikarhu734

Ай бұрын

Square line studio. It has a fairly limited free version, but, yes, subscriptions. .... Kind of bummed me out, too, but I think that ST has a bunch of graphic support in the last few months.

@0miker0

Ай бұрын

The free version is lets you do everything the paid version does but limits on five screen and fifty controls. This is more than enough for anyone.

@VolosProjects

Ай бұрын

I agreee mike, i never needed paid version. Now you can have 150 widgets in personal licence.

I feel very disappointed in you at this moment. I do want to know more about LVGL... but still disappointed. Your pure code interfaces were inspiring.

@VolosProjects

Ай бұрын

Sorry my friend. don't worry there will be planty pure code interfaces more:)

It's called kitchen, not kitchten.

svaka ti cast pozdrav od nas za vas

@VolosProjects

Ай бұрын

Pozdrav i vama od nas😀