Yeah Racing 1 10th Touring Car Version 3 Setup Station 1st look
Ғылым және технология
Welcome back to Wtf Rc Cars,
Yeah Racing 1 10th Touring Car Version 3 Setup Station 1st look
YT-0140RD red
YT-0140OR orange
YT-0140BK black
Yeah Racing 1/10th Touring Car Version 3 Setup Station £99.50
speedrc.co.uk/yeah-racing-1-1...
rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777
info@rdmodels.co.uk
Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 - 4.00
CNHL batteries link
chinahobbyline.com/?ref=Cnhlw...
Пікірлер: 27
That looks like a really nice kit. Will have to add it to my shopping list. Great review 👍🏻
@WTFRCCars
Жыл бұрын
Yeh there spot in and way cheaper than some of the others out there, glad ya like the vid :)
Very Cool Setup Station!
@WTFRCCars
Жыл бұрын
I think so too!
@pandacrawler6x6
Жыл бұрын
@@WTFRCCars 🐼
Is it only for Onroad cars? Can it be used fir buggy’s?
Thank you!
@WTFRCCars
Жыл бұрын
It really is a fantastic well made tool but saying that I use a lot of Yeah Racing parts in my builds and there always fantastic :)
looks a nice bit of kit that 😎
@WTFRCCars
Жыл бұрын
Works good and really well made
Thank you for making this! I recently bought one and you answered a few of my questions. Searching your channel I see you do a lot of fly sky pro stuff too! I got one as a gift and need to learn how to use it so I’m sure I’ll be checking out those! When I was shopping for the set up station I saw the set up boards are they needed to use this? I know you mentioned to use a really flat surface. Top of the workbench/desk ok or should I get some thick glass or something similar? Have any more setup videos? Thx again, nice work on your channel. I started to start one but I’m stuck in trying to figure out editing and how to make videos. It’s not easy.
@WTFRCCars
Ай бұрын
Yeh any flat surfaces will do and yeh editing takes some doing and a good pc, the one I built has 5950x 16 core 32 thread CPU, 64gb ram, 4 2tb nvem pcie 4 ssd's 1200wat psu and rtx3090 with 24gb memory and it smashes 4k 60 vids :)
Seems like a nice kit...and, the price is right ($120 USD). As for quality, I'm assuming it's good (knowing that most YR products are is very good quality). Should note that, just because it states "on-road" doesn't mean it can only be used with on-road vehicles. I've also used mine (of a different brand) for off-road vehicles, and it's proven itself equally useful. What I'm curious about is the accuracy. I have the Hudy version, which I've had for a few years, and it's (supposedly) the 'most accurate'. I'm also aware that several from other brands have been tested, and, from what I've read/seen, they've (so far) all been proven to be slightly 'off' (some by as little at 0.5° @ 30°, and others as much as 2° @ 30°. How accurate is the YR V3?
been wanting the version 3 but only found the v2 would you happen to know the difference?
@WTFRCCars
Жыл бұрын
It tells you on their site what's changed :) www.yeahracing.com/blog/Updated-V3-1-10-Touring-Car-Setup-Station
5:06 yea but what are those markings. i have never seen a setup station with those marks. you would just measure your steering angle like you would measure toe right? so what are those markings and what use do they have?
@WTFRCCars
10 ай бұрын
Not sure which ones you mean, at that point I'm just showing how to check that both wheels trun the exact same degrees each way :)
@dirtrider88
8 ай бұрын
@@WTFRCCars the markings you put your finger on. the ones around the hole/slot the pin rides in. click on the time stamp i made.
@WTFRCCars
8 ай бұрын
Tbh I don't know what they are for I've not found a use for them
Hi, can you adjust the droop with this station?
@WTFRCCars
Жыл бұрын
It doesn't mention it in the instructions.
Can this be used for rc drift cars
@WTFRCCars
Жыл бұрын
Works for any 10 scale rc
4:53 uhhh not really. when you turn the wheel the whole thing turns. its no longer perpendicular to the car.
@WTFRCCars
8 ай бұрын
Yes you can and it's how it's measured in the manual for it
@dirtrider88
8 ай бұрын
@@WTFRCCars but the whole plate rotates. Your not getting an accurate reading
@WTFRCCars
8 ай бұрын
@dirtrider88 it looks strange but it does work correctly