YaMoRC YD8116 Switch Decoders / Signal Decoder. No2
An Overview of the NEW YD8116 Switch decoder.
The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder.
It presents the following features:
Sixteen independent 2.5Amp MOSFET outputs
Max 5 Amp combined current
Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address
No complicated CV settings.
Clear text configuration based upon our new ES-Link technology.
With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface: No need for PC-software or Phone/Tablet Apps!. Configuration also over USB from PC Software on the mentioned devices as well as our YD6016LN.
All of the 16 outputs are freely configurable from 16x simple on-off to complex and elaborate signals with up to 8 LEDs/lamps
Each defined device (signal, switch, turnout) can have its own address
Devices can be operated by the new DCCext standard or conventional turnout DCC-commands (throw/close)
Numerous predefined signal definitions for Dutch, German (H/V, Ks and Form) British and Swiss prototypical signals
Signals can include fading (Bulbs emulated in case of LEDs) dark-phase inclusion, black-out based on previous signal's state
Outputs can be time-limited e.g. for light coil-motors
Settable night-dimming for the complete decoder, with configurable address / decoder
Very suitable for motorized point motors.
Link to product.
www.dcctrainau...
www.dcctrainautomation.co.uk
#yamorc, #dcctrainautomation, #itrain, #dcc
Пікірлер: 27
I’ve just spent 15 minutes learning the way round the programming of an 8116 with the 9100. This video helps immensely with this process. Thank you for taking the time to publish it. My initial impression of YaMoRC products is very positive - I’ve just taken delivery of a 2nd 8116.
@DCCtrainautomation
Жыл бұрын
Hello Andrew I am pleased you like it so much. More good stuff to come.
Thanks for the great presentation! I wasn't 100% sure what all the fuss was about (especially knowing the DR4018 is a great product, despite it being indeed a pain to configure). It does seem YaMoRC has really taken user friendliness to the next level; still requires some skills, but way more accessible 👍
James you are so talented with all DCC. Thanks for all your help and support
I have 2 YD8008 and love them, they set up so simply and offer great performance with Hornby & Peco point motors.
@DCCtrainautomation
Жыл бұрын
Video coming soon about the YD8008 and YD8044
Good stuff James. These units dim LED’s too don’t they, if too bright and wonder if 1) you can recommend companies doing UK signalling that will dim, do fades and hopefully use common positives. 2) Will these units also cater for signals that include theatre boxes and position lights? 👍
Great explanatory video. You mentioned that the YD8116 lacks a Loconet connection and all you need is to connect a track feed to the signal power side. Not sure I understand Can you clarify ? My goal is simply have the train stop when red . I'm using Rocrail in auto mode Thanks
It looks like it is far easier to configure individual outputs as compared to the Digikeijs 4018
I don't understand the flashing lights. How to distinguish between programming VS Normal flashing.
Will this system work with JMRI?
How does the Loconet signal get transmitted to the 8116 when operating the device? Is there a Loconet version?
@DCCtrainautomation
5 ай бұрын
This unit does not have loconet. You just out a DCC track feed to the signal side and then it gets its switch commands from here. You don’t need to connect loconet for it to work perfectly.
Hi, can it run together Roco z21/Z21? Etc. Koert
@DCCtrainautomation
Жыл бұрын
Yes it can.
The software looks very similar to the one that digikeijs developed for their products, is there a relationship here or a collaboration? Thanks for a great video.
@DCCtrainautomation
Жыл бұрын
The original developer for the Digikeijs equipment is the developer for YaMoRC.
Interesting stuff! The switch unit be used in conjunction with a DR4088LN? I've just ordered a heap of Dapol semaphore signals and was hoping to use the block sensing to trigger these. Is this something that is do-able with this gear?
@DCCtrainautomation
Жыл бұрын
Hello Kodi What control system are you using? iTrain or Train Controller or something else?
@kodibellchambers1290
Жыл бұрын
@@DCCtrainautomation iTrain actually :)
@DCCtrainautomation
Жыл бұрын
@@kodibellchambers1290 ok so the signals need to be drives from accessory decoder and then iTrain will do the rest.
I wish to use Dapol semaphore signals. Can I do this thanks
@DCCtrainautomation
11 ай бұрын
Hello sir If you want to use the Dapol semaphore signals you need a rely on the output of the 8116 and then connect the signal to the relay. This is the only way you can do this.
What would I use for an USA 3 head Signal?Grn Yel Red.
@jerryfbarnes5228
2 ай бұрын
I am still waiting for a reply!
Would this switch decoder couple to a Digikeijs system
@DCCtrainautomation
Жыл бұрын
Yes this switch decoder will work With any DCC command station