Hello! Thank you for your video. Very clear presentation. I just bought a neglegted 2006 X-max 125 I intend to repair.

@pullumoto

3 жыл бұрын

Good luck with your build!

because of you i just check my scooter cos i got the temp very high i hope is solve now stay safe

@pullumoto

2 жыл бұрын

The first thing to check is the oil and check if its milky, meaning that coolant is mixing with oil. If it is I would do a compression test to check for head gasket failure. it compression is good it's most probably a water pump failure, there is an oil seal inside and when it fails the same thing happens

@override39

2 жыл бұрын

@@pullumoto hi there thank you i really glad you answer cos is my second time whit this problem Yes the oil is milky i put a nieuw pump in 2019 and also a thermostaat I wil check Tomorrow stay safe and keep it up the good work

HI! but have you cleaned the internal chamber of the engine block, where the engine oil is located?

@pullumoto

2 ай бұрын

I used cheap oil to run the engine for a while and then flush that oil ,it will eventually clean itself like that

I just finished rebuilding but its knocking rough and not staying on if i dont give it gas any recommendations? 🙋🏼‍♂️

@pullumoto

7 ай бұрын

double check your valve clearances and your timing chain again as you may have skipped it by 1 tooth

@user-ix8js9im1d

7 ай бұрын

@@pullumoto thank you bro

Bro I need to rear brake pads available because my country not available please help me

@nemo247

4 ай бұрын

Where do you live? I can send some from germany maybe?

How many km do you have so that you have to chnage the head gasket? Or is this a issue of this scooter? It shouldt cause its a japan scooter. When its a normal issue i'm disapointed with the japanese 😂

@pullumoto

Жыл бұрын

the head gasket was actually still good at 35000km, It didn't have to be replaced, my actual problem was the water pump seal that's why it was mixing oil with coolant

@servantofdeen

Жыл бұрын

@@pullumoto ouuuh, well in my oppinion a dumb idea from the ingeniers to put the water direct with the camshaft drive. Its hot there and the seals of the water pump can't hold much long

@pullumoto

Жыл бұрын

I agree it's such a bad design which kinda sucks for a jap scooter. At least it is very easy to replace and the new kit should last a very long time

@servantofdeen

Жыл бұрын

@@pullumoto hope so keep it up man💪🏼

Do you happend to have a video pulling the motor out of this scooter?

@pullumoto

7 ай бұрын

no sorry 😔

@user-ix8js9im1d

7 ай бұрын

@@pullumotoits cool but what you did in the 4:43 the yp250r is different how can i adjust the chain

@pullumoto

7 ай бұрын

the 250 should still have the same marks to align it

@user-ix8js9im1d

7 ай бұрын

@@pullumoto nah it’s different

Bro how do I change this without taking the engine out I'm a noobie to all this

@pullumoto

Жыл бұрын

You don't really need to remove the engine to do this just, it just makes it easier and everything is more accessible. The engine is totally accessible while inside the scooter and a rebuild can be done on the spot, I suggest downloading the scooter workshop manual also as it will be of great help when doing this.

I now see how different the 125cc is from 250cc engine. The 250 cc does not have a proper oil filter

@pullumoto

2 жыл бұрын

I always thought the 250cc is a copy of the 125 with a larger bore but looks like there are some differences, I couldn't find the oil filter in the workshop manual for the 250cc either