Yamaha Xmax(YP125R) Thermostat and Coolant Replacement

Автокөліктер мен көлік құралдары

This is a short How to guide on how to replace the thermostat on an Xmax 125 2006(Also known as yp125r). My thermostat was get stuck on the closed position and the scooter was overheating.
Tools Needed:
- 8mm socket wrench
- 1 Philips screwdriver
Yamaha Xmax(YP125R) Thermostat Replacement
Thermostat Part No: 1B9124110100
Ebay Link: ebay.us/nFC1vj
Socials:
Instagram: / lpullu

Пікірлер: 14

  • @ALTO7730
    @ALTO773012 күн бұрын

    Ciao Pullo, I have noticed my radiator fan doesnt start, engine gets to hot quickly, so whats mostly the issue, Coolant Temperature sensor or the thermostate!?

  • @pullumoto

    @pullumoto

    12 күн бұрын

    First thing I would check is the oil, check that its not milky and contaminated with coolant(just check from dipstick) If it's clean oil I would check coolant level and thermostat. You can test the thermostat easily in a pot with boiling water and you should see it open.

  • @alexmentzveligia8345
    @alexmentzveligia83453 жыл бұрын

    Thanks for the video, Is your radiator fan also going on, or only was overheating?

  • @pullumoto

    @pullumoto

    3 жыл бұрын

    Yes it was also going on and the temperature wasnt dropping

  • @trafficjam2wheels509

    @trafficjam2wheels509

    2 жыл бұрын

    @@pullumoto did it solve the problem? Mine overheats as well, but I suspect thermostat works. I think my radiator it’s the problem. It’s dirty

  • @fransanchez4615
    @fransanchez4615 Жыл бұрын

    A mi se me calienta la moto cuanto salta el ventilador he limpiado el liquido refigerante pero seguiré purgandolo salio mucha mierda lo purgar otra vez a ver porque me se calentaba la moto a ver si es que estaba sucio o es el termostato o la bomba del agua, un saludo.

  • @pullumoto

    @pullumoto

    Жыл бұрын

    asegúrese de que el refrigerante esté limpio y no tenga sedimentos y siga enjuagando hasta que esté limpio. También puedes probar un termostato quitándolo y metiéndolo en agua hirviendo en la cocina y verlo abierto para asegurarte de que funciona

  • @dejunfrancis4162
    @dejunfrancis41627 ай бұрын

    Pullu if I don't bleed will the thermostat and the pump still work

  • @pullumoto

    @pullumoto

    7 ай бұрын

    yes they will work but there is a great chance of coolant bubbling and overheating

  • @dejunfrancis4162

    @dejunfrancis4162

    7 ай бұрын

    @@pullumoto my bike was working just fine but dismounted to respray after mounting I realise it's not cooling but I didn't know about bleeding and noticed the hose are empty which means water did not come through so I was thinking if it's not my water pump or thermostat

  • @pullumoto

    @pullumoto

    7 ай бұрын

    In that case I would refill the coolant (near battery) and also the reservoir (under footrest) as it seems you do not have enough coolant

  • @dejunfrancis4162

    @dejunfrancis4162

    7 ай бұрын

    Should the hose carring the water get hot my fan now goes on and off properly the needle stay steady in the middle is this a sigh that it's all good.if so thank you so much for putting up this video

  • @pullumoto

    @pullumoto

    7 ай бұрын

    all hoses should get hot after a few minutes when the needle is in the middle(it should stay around there that is good)

Келесі