Thank you so much. My 2020 Xmax batter died due to the cold weather and not riding for two weeks and I needed quick video to help me out! Just connected the charger and hopefully it will work when I need to leave for work early in the morning at 4.30AM !!

@tapecknows

3 жыл бұрын

I’m glad I can help! Once you know which bolts to undo, it’s relatively quick to get to the battery. The battery should be ready to go in 3-4 hours since it’s a small battery 🔋

Thanks for a very clear demo. I need to drip feed my battery when I store my Xmax when I head overseas. Cheers.

@tapecknows

2 жыл бұрын

Glad it helped!

Thanks very much man this video saved my day!

@tapecknows

2 жыл бұрын

Glad it helped!

Thank you. You helped me a lot! 👍👍

@tapecknows

2 жыл бұрын

Glad I could help!

Very good explanations , Thx a lot

@tapecknows

Жыл бұрын

Glad it helped!

Very helpful! Thanks

@tapecknows

4 жыл бұрын

Glad I could help 🙏🏽

Great job! Video and voice over A1

@tapecknows

3 жыл бұрын

Thanks, appreciate that! 🙏🏽

Very helpful! Thanks^^

@tapecknows

3 жыл бұрын

Glad I could help!

Short and to the point, thank you. My U.S. Xmax 300 has 2 screws and two push pins holding the battery cover on.

@tapecknows

3 жыл бұрын

Those push pins must make it slightly easier to take off

@kevinwilkinson1510

3 жыл бұрын

@@tapecknows Actually, I don't think you need to remove the two pins or in your case the two screws, at the top of the fairing as there does not seem to be any part of the cover that is held by those two fasteners.

@deltajohnny

2 жыл бұрын

@@kevinwilkinson1510 i have just done it, and I can confirm that these 2 extra pins / screws do not need to be removed 👍👍 Thank you very much for the information 👏👏

Good Vids , well explained. Used to have a 06 silverwing. Picking up 1 of these tomorrow. Scooters are functional Fun.

@tapecknows

2 жыл бұрын

How are you getting on with your XMAX?

@brianrichard1768

2 жыл бұрын

@@tapecknows Didn't get. Bike had damage from shipping and unfortunately it is the only one within 300 miles of me so now I wait.

Excellent brother 👍

@tapecknows

Жыл бұрын

Thanks 🙌🏽

Cheers for this.. helped me.

@tapecknows

3 жыл бұрын

Glad the video helped! 🙌🏽

BRILLIANT 👍☺️ Thank you Sir. So much easier to do now, you explained it so well that I bet you sell bikes?! Thx

@tapecknows

3 жыл бұрын

Thanks for the compliment Stephen! Man I wish I sold bikes like these haha

short n sweet thanks

@tapecknows

2 жыл бұрын

Thanks for watching!

çok işime yaradı, teşekkür ederim

@tapecknows

2 жыл бұрын

Amazing, glad I could help! Translate: harika, yardım edebildiğime sevindim!

Great tutorial. That's for the video. 🙂

@tapecknows

4 жыл бұрын

Thank you Oscar! I appreciate your support 🙏🏽

Very useful video 👏👏, and I just want to point out that the two lower pins or screws located at the top of the fairing do not need to be removed, as there does not seem to be any part of the cover held by them. Thanks for the video! 👍👍

@tapecknows

2 жыл бұрын

Thanks for the comment! It seems to be needed for my specific model. It might be different for different regions

@deltajohnny

2 жыл бұрын

@@tapecknows Thank you very much again, and to offer some more information to others seeking for help, my Xmax 300 is a Spanish 2018 model 😉😉 Thanks again, and keep up the good work! 😉😉👍👍

@colinmurphy4403

2 жыл бұрын

Delta, you are right there was no need to remove the two screws located near the speed monitor, because the front panel just clips in there.

@deltajohnny

2 жыл бұрын

@@colinmurphy4403 Thank you very much for the information 😉😉

Great video! Are you considering any modifications to parts of your XMAX? Like carbon fibre parts and such...

@tapecknows

4 жыл бұрын

Thank you Janson! Yeah I’m thinking of changing the exhaust and even the handlebars. I’ll have to wait for work to start again though 😔

Obrigado! Thank you

@tapecknows

2 жыл бұрын

De nada!

Thanks for video 👍👌

@tapecknows

4 жыл бұрын

Thank you for watching Mario! Hope it was helpful 🙏🏽

@mariostekic

4 жыл бұрын

@@tapecknows Of course 👍👌I am a new Xmax owner and there is a lot I want to learn to do myself 😊💪

Very good video! How would you say windbuffeting is on the scooter say up to 50mph? And how tall are you, and is it roomy enough?

@tapecknows

3 жыл бұрын

Nothing really that noticeable, I have my windscreen on the highest setting and I never feel like my head to getting taken off. I'm 5'8" and I could do with a bit more leg room. I've adjusted my handlebars so I have a more upright riding position but leg space could do with a slight increase in the forward position. Then again, I don't want my legs out front like a Harley haha

Thanks for that easy simple instruction. Is the side blue panels easy to remove? I am trying to replace a badly scratched blue panel.

@tapecknows

3 жыл бұрын

I haven’t tried yet but I think they’re simple enough. I’ll make a video if I need to take the panels off at some point

@richiep3520

3 жыл бұрын

@@tapecknows I am one of those people who breaks everything I touch and wing it. But as these panels are expensive, I won't be messing about. I have seen a few videos on KZread but nothing clearly showing as well as you did. The part I need on the parts site just shows the top part, not the black piece that runs down to foot rest so it has to be able separate. Panels can be so fiddly.

Where did Your turn signals go? Did you upgrade front and back? Thanks

@tapecknows

4 жыл бұрын

No those are the stock indicator signals here in the UK and I believe in Europe too. I know the models in the US have those indicators that stick out like a standard motorcycle

Have you looked at installing a gps tracker on the Xmax?

@tapecknows

3 жыл бұрын

Yeahh I have a Monimoto tracker on mine

How do you connect a battery tender so that you can charge the battery without removing the cover? Thanks.

@tapecknows

3 жыл бұрын

Thanks for the question! It's a simple task, just screwing it on the battery terminals but I've got a video coming up for that soon!

@tapecknows

3 жыл бұрын

Got a video for your question here! kzread.info/dash/bejne/fYqoxJasZbObhbw.html

how to change the fuel tank cover of xmax 300, I got a fibre one

@tapecknows

3 жыл бұрын

Sounds like a good one, I’ll look into it!

Trade in your Allen key wrenches for magnetic ones trust me

@tapecknows

2 жыл бұрын

That’s a good shout, will have a look 👌🏽

ありがとう！！

@tapecknows

3 жыл бұрын

いえいえ

Can you please let me know how to change kph display to mph?

@tapecknows

2 жыл бұрын

It’s an analogue speedometer so you simply read the smaller numbers for mph

@adamwells8183

2 жыл бұрын

@@tapecknows the digital odometer?

@tapecknows

2 жыл бұрын

Oh if you mean the odometer then I’m not sure how to change that from km to miles, might be specific to country the bike was sold in

@adamwells8183

2 жыл бұрын

Ok thank you I will look in to it

Where is the lighter fuse located

@tapecknows

Ай бұрын

Not sure

battery 6v or 12v ?

@tapecknows

2 жыл бұрын

12V

Hello again..! Nice stuff. Damn seems like you got alot of stuff connected to your battery. If you can check out my two reviews (also one of my xmax) would be much appreciated :)

@tapecknows

4 жыл бұрын

Thank you Blue Skies! I actually only have heated grips connected to my battery... the wiring is just a bit messy haha

為什麼要多拆下面兩顆螺絲?

@tapecknows

Ай бұрын

It just loosens everything to make it easier

Where did

@tapecknows

Ай бұрын

Where's what?

Looks very very tedious...

@tapecknows

3 жыл бұрын

Maybe at first, but it’s a simple job

very disappointing, after the shooting session sound u did not continue where u left u just put back the case. I wanted to hear u tell us more about how to take out the battery etc. pointless video...

@tapecknows

3 жыл бұрын

cheer up!

@cheesepie2989

3 жыл бұрын

I would like to know too.

Helpfull, thank you!

@tapecknows

Жыл бұрын

I’m glad it helped!