Extraordinary! That sound really does it! 👍

@BaconMoto

3 жыл бұрын

Thank you! It really does yeah!

Mooi geluid komt er uit !

verry good looking bike , and good minarelli engine

The problem with tuning a WR engine is the head, it already is quite restrictive at 125cc’s.

In my country this bike come with 155cc with 6 speed & fuel injection system. They called WR155 R

Pretty good, but the stock engine has around 14/15 hp

@BaconMoto

4 жыл бұрын

Thanks and True! But Yamaha lists the engine hp and this is an estimate of the rear wheel hp next to the dyno rwhp

@lorenzorusso5375

4 жыл бұрын

@@BaconMoto of course, 14 hp at the crank😉 I have a Husqvarna with the same engine (carburetor) and I wish I had the money to modify it

@The3SIXTYgamerNL

4 жыл бұрын

Well i had my wr125x with IXIL full system and K&N airfilter on the dyno and it gave around 10/11 HP now it was running lean because i dont have a PC (thats 10/11HP on the rear wheel tho) *cool fact in a tunnel with the wind in my back i hit the 132km/u on my dashboard... ofc this is like 125km/u on GPS but still thats fast...

@oihdnuoc679

4 жыл бұрын

125ccm bikes has only between 10 and 13 ps.

@killergorilla9762

4 жыл бұрын

@@oihdnuoc679 no ? 2 Stroke 125 30+ HP 4 Stroke up to 20 HP

Carb sound 😎🤩👍

@paahtopro3950

2 жыл бұрын

its not carb

Hey man nice build, what injector did you use? Thanks

hi i have a 2016 wr125r and the neutral light, signals , horn and the speedometer stopped working. any idea why? maybe a wire came out or a fuze died? the bike is running good and starting well

omg amazing

Get a 65mm block and throw it in there.. It'll fit i promise and a jack up crankshaft, it'll make atleast 40hp. the block is similar to Y15zr, exciter 150,Mx king 150..all basically same bike but yeah just for reference. in case you can't find it in the state, Malaysia is have huge selection of aftermarket parts for these engine we got custom cams and all

@ismailboudouft5074

Жыл бұрын

Brother is there any site where i can find this stuff on i’m from europe so i dont know

Thanks for the video! Could the “average joe” do this? Or would it be better to have it done in a garage?

@BaconMoto

4 жыл бұрын

I'd say if you've ever had a dirtbike and did the maintenance yourself (timing, clutch, piston swap etc), go for it. But if you've never done anything on a bike regarding the engine, i'd recommend going to a friend that has the experience or a garage.

@speersyboy99

4 жыл бұрын

Thanks

Ik ben zelf ook aan het kijken voor een 180cc kit. Wat voor cinderkop en luchtfilter heb je? En heb je std drijfstang? En std oliepomp?

Did you break in that piston and cylinder? Pretty important when you want to keep your compression over longer periods of time! Sounds damn awesome

@blazexiytb

3 ай бұрын

Break in?

@odragz8118

26 күн бұрын

@@blazexiytb I know I'm late, but yes. You need to break in a new engine. First 500 miles usually. Look it up, but every motorbike & new engine has to do it. Even if it's just been sat for a few months. You don't just get on it and max rev it. You need to let it run in slightly first, do an oil change (to remove gunk at the bottom from it sitting) and then you can ride like normal after a while.

Hey, maybe a late question, but what MAP did you use after installing the PC5 did you get it dyno"ed straight away or programmed one from the dynojet site? If you still have the MAP (125cc)/(180cc) with full exhaust and K&N filter installed, is there a possibilty to get it from you?...

@BaconMoto

4 жыл бұрын

I had it dyno'ed straight away. No standard map is sufficient enough for the bigbore

@The3SIXTYgamerNL

4 жыл бұрын

@@BaconMoto Beste Bacon, Heeft u de map van de 180cc nog? ik ben namelijk bezig met het ombouwen, maar ik moet met de motor naar de DynoJet kunnen rijden om hem helemaal te laten fine tunen... wellicht kan dit met de map die u er toen voor heeft laten maken, Ik ben natuurlijk bereid ervoor te betalen. Mvg!

@ralphjansen8715

2 жыл бұрын

@@The3SIXTYgamerNL did it work?

Hi did ye put a bigger injector body on the bike or just leave the 125 one on it and map it

Please upload a video of u riding it so we can decide if we want to do the upgrade. Thanks!

@BaconMoto

4 жыл бұрын

I'll do my best to shoot some footage of me riding it.

Mantap gaes....👍👍👍

Hello, we can find the same parts for a mt 125 so we can do the same prep as on this wrx 125? Ride safe✌️

Great video. How can I get some rings and piston with gasket for me yzf r125?

Hello I have the same Engine in a Beta RR Lc 125 2020. I have biluilt in a 180 kit with an 180 Zylinder Header. Do you know what carburetor settings it can have Hood and stand nozzle?

do you need to change the head if u want to install 180 kit? Is stock head compatible?

What year is your wr also how many miles did it have on the clock before you done the upgrade?

@BaconMoto

4 жыл бұрын

This is a 2016 wrx, had about 10k on the clock

where did you buy your 180 kit and your Arrow exhaust ?

Kan je de 183cc kit zonder problemen gebruiken met de standaard cilinder kop?

How the crankshaft dealing with the excess stress was thinking about doing this on my yzf same engine btw ?

@BaconMoto

4 жыл бұрын

Still going strong, no problems 'till now. It's always uncertain if the bike will take it, every engine is different.

@envexon4168

4 жыл бұрын

Thats great to hear 20hp tho is a good gain suppose thats down to how well its tuned yeah every engine is different definitely agreeable but should all be around the same being yamaha lol

@bekeneel

4 жыл бұрын

Cranckshaft is not same as camshaft? Cuz Malossi makes a camshaft too for this kit. I think that extra stress shouldn't be a problem, this kit has been installed many times on a WR so, but WR is already out of production for years and I don't like it very much cuz it's a heavy ass bike and it was really expensive too. My 125cc 4stroke, also a supermoto weighs like 40kg less lol, I think with this kit it would be crazy fast...

@banze4542

3 жыл бұрын

@@bekeneel What?

@joshuarudd7690

2 жыл бұрын

@@bekeneel @Neel Beke mt125 ktm125 and yzfr125 cbr125 all heavy to the wr125x is bit lighter do your research mate

Get a Stock DT and u will Kill that 180cc.... ;)

@rthaurr3522

4 жыл бұрын

🤫🙂🙂

@kayn3634

4 жыл бұрын

dt200r

@diefeuermongos1026

4 жыл бұрын

Jep

@lilwheelz795

4 жыл бұрын

Wow u cannot compare a 2stroke with a 4stroke

@bekeneel

3 жыл бұрын

Dt is superold, won't be reliable & in like 1.5 years it will probably even be illegal in my country here cuz of moto inspections, emissions, also a dt doesn't even have road tires..

Can you add the link to the site where you got the cylinder kit

What main jet would you recommend for 180cc Malossi? I have original 122 and I think about 130 - 135 - 140, what would you use?

did you have the cam in at the dyno?

What power commander did you buy mate and where from please

hello ca what level was level was piston change and reliability in general ?

👌👌👌

Did you put it on the dyno with the dB killer? If you put the dB killer back in you will instantly get at least 0.5 extra HP due to back pressure but with your 180 kit I imagine you’d be looking more towards 1hp, these gains may sound pathetic but I imagine it might help abit if ur planning on going as fast as possible on these little machines (I know this is true on most WR’s as I’ve seen many dyno sheets using this method but every bike is different)

@BaconMoto

4 жыл бұрын

Nope Db killer went out after install of the exhaust and never went back in haha! But thanks for the heads up!

5 hp isnt bad considering you stared with around 13 thats like a quarter over all power gain id be curious how reliable those kits are tho

If you could play with the ignition timing, this thing easily rips to 12000rpm with peak power at about 10500rpm like all the 63mm pistons here in Malaysia. Power commander sucks, best if you can get a standalone ecu from southeast Asia.

@chrisnvdd5094

3 жыл бұрын

what kind of ecu's do you recommand then? could you tell me wich?

@vartax8885

Жыл бұрын

well ignition timing is not everything, camshaft timing has to allow the right flow at high rpms, too

my 80cc derbi has 20 HP too✌️

@zathmusic

4 жыл бұрын

Yeah 2 stroke powerr

@chrisnvdd5094

4 жыл бұрын

and how much torque?

@yannhayon2796

4 жыл бұрын

Chris NvdD i something like 9-10 Nm

@bekeneel

3 жыл бұрын

tested, on the wheel?

@yannhayon2796

3 жыл бұрын

Neel Beke nope is written in the papers you get with the cylinder

Does the original crankshaft hold that 180 cylinder? No injection modification?

@elias_frj6915

11 ай бұрын

It comes with a different mapping for it

How much difference does the k&n air filter have compared to stock

Do you have to do anything to the Power commander or can i just plug it in and im good to go?

@BaconMoto

3 жыл бұрын

The power commander itself doesn't do much. With a dyno you can tune a map specific for your bike and save that on the power commander.

@mraadil1958

3 жыл бұрын

@@BaconMoto can I get the tune please?

Does KN filter work? Any difference in gas reaction, sound, power?

@AotL0000

3 жыл бұрын

I mean it should like any aftermqrket good airfilter run better

Have you seen the 220cc ultra big bore kit for them shit that’s what I want

Minarelli engine right?

Now that there's a new VVA head on these engines, are you planning to switch the heads?

@bekeneel

3 жыл бұрын

What do u mean? The wr is also not being made for years anymore.

@Farie977

3 жыл бұрын

@@bekeneel actually, the WR has just been released in Indonesia. Instead of a 125cc engine, it comes with a 155cc engine. It's pretty much the same, but the engine comes with VVA (or in Honda's terms, Hyper VTEC).

@bekeneel

3 жыл бұрын

@@Farie977 Aha, well in my country I would need a special moto license and lessons then to drive more than 125cc (officially) and taht's expensive again, so is this new WR version for just indeonsia or..

@Farie977

3 жыл бұрын

@@bekeneel iirc it's for the SEA region, it was unveiled alongside the baby Yamaha XSR

Is it possible that you could provide us woth the tuning map?

Does the engine broke when i do this for about 2 years?...sorry for bad english

@BaconMoto

4 жыл бұрын

If you maintain your bike properly, and more regularly than with 125cc, I really don't think it'll harm the engine. No guarantee of course because every bike is different.

@a_fresh_fruits_a4393

4 жыл бұрын

@@BaconMoto k thanks

@Michael-zf7bj

4 жыл бұрын

@@BaconMoto how do you mean maintain it more than 125 cc? U mean oil changes earlier etc? Thanks

@BaconMoto

4 жыл бұрын

@@Michael-zf7bj Yeah, just check the bike more regularly, maybe it's not necessary but I like to. After all, it's upgraded so more wear on the bike. Better safe than sorry

what do i need to change about my cylinder head to run 180ccm?

Hows that that IAP fuel map going?

Random question about wr, can you remove the db killer off the stock exhaust?

@tomryan5831

4 жыл бұрын

Gianluca yeah

@BaconMoto

4 жыл бұрын

I'm guessing you can, but you'll have to drill out the rivets to get inside. and cut the baffle out

@kevinmarcelderechte1112

4 жыл бұрын

No u cant

@bekeneel

3 жыл бұрын

Oh thought you meant the catalyst, I removed the db-killer (alltho it was just sound absorbing material around the headpipe), but I don't recommend it really, you should get rid of the catalyst instead or get a full exhaust system alltogethere. I planned to just remove that cat on mine but now found out in 2 years in my country there will be inspection for motos too, then i will need the original exhaust (with cat), so i just bought the scalvini full exhaust for my fantic, better sound, more power etc..

Hi where do I get the 180 kit from

Hey! arrow header give you more torgue or what? i maybe buy it!

@BaconMoto

4 жыл бұрын

Hey! Yeah it gives a bit more power, but also better sound and less emission crap = happier bike haha!

@jaakkoalatalo498

4 жыл бұрын

@@BaconMoto is worth to buy air filter?

Wich type is the cylinder? Many blown headgasket?

Wat is de topsnelheid met de 180cc kit?

Hello, you had reliability problems ? and i have to buy the camshaft or not if i want 180cc ? Thanks

@BaconMoto

3 жыл бұрын

Didn't encounter any, just make sure you don't have a lot of km's on the engine. If you do i would do a rebuild. I had the racing camshaft in this engine.

Hows the torque so low? Is it because of the electric injection? I dynoed my 183cc husqvarna without a steeper camsaft and got 21nm and 18hp? Or is it that I have malossi piston instead of that what you have

@thewolfdogy2895

4 жыл бұрын

Could be the different piston, because the compression could be different so it produces more tourque or less

@blazexiytb

3 ай бұрын

Hey what main jet size you used on ur husqvarna? I have original 122 for 125cc but now I have 180cc and I’m not sure if I should use 130, 135, or 140

@Cplink420

3 ай бұрын

@@blazexiytb I think I had 140 or 145.

@blazexiytb

3 ай бұрын

@@Cplink420 did it run well?

@blazexiytb

3 ай бұрын

@@Cplink420 your original was 122 too?

For the 180cc upgrade and comdand thing is it true that it all needs remaping or not I got the same bike and wanted to do it myself then I heard it may need remapping and put me off doing so

@BaconMoto

3 жыл бұрын

Yup, that's correct. You need to dyno for it not to run lean and destroy your engine. if you go to a proper tuner, he or she can tell you everything about it

@leocoleshill2435

3 жыл бұрын

@@BaconMoto wots that price range for it coz a legit place wont do it unless I had a full bike licence is that correct?

Antes de embragar mete la marcha se pensara que es listos y menudas reducciones asi se joden engranajes y la horquilla del cambio

My friends 50ccm bikr has something around 24hp but he got a 86ccm tuning kit and fully buyld for races but i think whit a better setup you could get something around 28hp

@henryhaxby9283

4 жыл бұрын

Won't be long before it blows up

@Dinimer420

4 жыл бұрын

@@henryhaxby9283 its survifed until today and over 2000km

@wildwilco

4 жыл бұрын

2 stroke?

@Dinimer420

4 жыл бұрын

@@wildwilco yes

@wildwilco

4 жыл бұрын

@@Dinimer420 in that case, I used to own a 70cc, which had 22Hp to the wheel. 2 strokes are awesome.

What was the horsepower gain?

I lookt at the powercommander V link but cant find one who fits the wr125x. WIll it work if i chose the wr250x?

@MrZiko-nf9hx

4 жыл бұрын

Nvm found one for The wr125x

@vizu9597

4 жыл бұрын

@@MrZiko-nf9hx can you send me the link

@The3SIXTYgamerNL

4 жыл бұрын

@@vizu9597 powercommander.nl/dynojet-powercommander-pcv-yamaha-wr125x-2009-2013.html bought mine here yesterday...

Do you have to tune the bike or is it okej whit the "power commander V" ECU if you put a 180cc?

@The3SIXTYgamerNL

4 жыл бұрын

Yes it will need fine tuning for results like this.

@kosa8164

4 жыл бұрын

@@The3SIXTYgamerNL can you do it at home or do u have to do it at a dyno place and is it expensive

@The3SIXTYgamerNL

4 жыл бұрын

@@kosa8164 I guess you dont have a dyno at home, you could try to download a mapping online but everybike runs different so I strongly suggest to go to a bike garage and let it be fine tuned there normally a dyno run cost about 45 euros but you wil need a couple before it is perfect.

Are those stock bars? They look wider than the stock ones ? If u have long arms they are annoying

@BaconMoto

4 жыл бұрын

I believe so yeah, never changed them. I'll check it for sure if I'm at the bike again

My WR125x has 31K km on it now always changed my oil and filters on time do you think that would matter if I upgraded to 180 with camshaft? also there is a giant price difference in the kit that you use and Malossi do you think it is the same quality or wil the one that you use last a bit shorter, because i think malossi is just overrated.

@BaconMoto

4 жыл бұрын

I chose for this one because it had good reviews and is way cheaper then the malossi kit and it had some good reviews to it. Also It's hard to say if your bike will or won't take the 180. Look around on what km's others changed the 125 to a 180. If some have changed it around 30k and still drive without any problems, why not? If not i would be careful installing it, without changing the bearings/ crank just to be safe.

What did you do with yamahas's own black cdi box?

@BaconMoto

3 жыл бұрын

Left it as it was

where can i buy the air filter?

Map for power commander with arrow exhaust system no dB killer and k and n air filter?

@BaconMoto

4 жыл бұрын

I responded to that at your other comment :)

Hello, I was wondering how much power can a WR gain with just new full exhaust system and the kn filter... do u know? Because it is my actual customization.

@speersyboy99

4 жыл бұрын

GentleRider a couple of HP I think?

@BaconMoto

4 жыл бұрын

Hey! I don't think it's much, but i'm guessing like 5Hp? just a guess, you'll have to bench it to know for sure :)

@batukorbi8156

4 жыл бұрын

I have k&n filter and fmf exhaust. But still have catalytic converter. İt sounds good. I recommend buying k&n it makes difference.

@liamarcher489

4 жыл бұрын

1 or 2

Still not as good as a 125cc smoker thoooo

@cocoguardian6679

4 жыл бұрын

Milan Vondřich which one?

@milanvondrich9749

4 жыл бұрын

@@cocoguardian6679 Any lol, nah, just fucking with people who are into 4-strokes more. I'd still go for a DT125 or a KMX, just because I like two strokes more.

@BaconMoto

4 жыл бұрын

😂hahah, nothing beats the smell of a 2stroke

@milanvondrich9749

4 жыл бұрын

@@BaconMoto And the 2stroke sound of angry bees

@basedphilosopher

3 жыл бұрын

Milan Vondřich Id get a 2 stroke too but im not interested in having to search trough my concacts for a pickup after it breaks down 😂

Did you change the cam shaft? Try modify the head. You will reach 30hp

@GhazianSatya

4 жыл бұрын

@Estebita Latorre you can order hardened crankshaft for wr

Is it worth all the money and time for a 125, just to gain 5 hp? Love the bike by the way.

@darko_lengkeek-jakupovic

2 жыл бұрын

Stock they make 15 hp at the crank, not wheel. HP to the wheel is 9-12 on most 125's. Going from that to double is really fast. I'm guessing this guy has around 24 hp at the crank right now with the kit.

its 4takt right?

what was the top speed?

I have beta rr 50 factory 2016 swaped with 180 wrx engine and I bought exhaust with powerbomb

@djniggajanek3852

2 жыл бұрын

My top speed was 149km/h with gps

so what would the top speed be on this now then?

@BaconMoto

4 жыл бұрын

Around 10/15 km/h higher

Why don't you remove the airfilter cover so there is more air flow

Top speed ?

Ça a coûter combien cette prepa

0-100 km/h?

Heeft hij nu 180cc of 125cc?

What is your sprocket? 57 tooth?

@BaconMoto

4 жыл бұрын

sprockets are all stock. Front is currently 14 tooth, but i'm not sure what rear is.

@BaconMoto

4 жыл бұрын

I looked it up, rear is: 53

@martimbastos2656

4 жыл бұрын

ok, thank you!

hi can u share your dino map for pw5 ?

@BaconMoto

4 жыл бұрын

Every bike is different, so unfortunately I can't, sorry!

@brane1872

3 жыл бұрын

@@BaconMoto wuss

what is the top speed?

top speed?

Can this kit work on xt 125?

@BaconMoto

4 жыл бұрын

No sure! Check out the link to the kit in the description, if it's listed there it'll fit

How much faster it will go now?

@BaconMoto

4 жыл бұрын

It goes around 10/15 kmph faster with stock sprockets. but i'm going to change the sprockets rartio somewhere next week to get more top end.

Is the exhaust legal without the dB killer??

@BaconMoto

4 жыл бұрын

The exhaust is euro 4. So the law within the European union is that it has to have a db-killer installed. I don't know the law outside the EU but just watch for police and don't make a lot of noise when they're around. That's how I do it without a db killer

@zacsibley690

4 жыл бұрын

Bacon Moto alright thanks I’m running it without now anyway just got a power commander for my wr125x not sure how to go about mapping it could you point me in the right direction? Thanks

@zacsibley690

4 жыл бұрын

I have a full arrow exhaust system and a k and n air filter and just installed power commander V so a map for that would be greatly appreciated! Thanks

@BaconMoto

4 жыл бұрын

@@zacsibley690 Hey! sorry for taking a while to get back to you! I got the standard PC5 map from the Dynojet website and used that to see how it ran, adjusted where needed & boom, there's your map! Note; I wouldn't use this forever since every bike is different and a dyno tune is always the best option.

@zacsibley690

4 жыл бұрын

Bacon Moto much appreciated could you link the pc5 map it would be great thanks!

Hi man! I have a channel exclusive of 125 4t. I have a wr125x also. Can I use your video for my channel? You will sponsor and named in the video

@BaconMoto

4 жыл бұрын

Sure man, No problem!

@4StrokesAttack

4 жыл бұрын

@@BaconMoto Thank You very much! Have a nice day

@Marcopulciano1544

4 жыл бұрын

@@4StrokesAttack spoiler!! Troppo reising

and how old do you need to be for making your bike 180cc?

@mickymkk2916

3 жыл бұрын

Depends on where u live. I live in Czechia (centre of Europe) and the limit here for 16yo is 125cc 15PS (11kw). Try to google it :)

What year and model is your bike?

@BaconMoto

3 жыл бұрын

it's a 2016 wr125x

Does it power wheelie?

@BaconMoto

4 жыл бұрын

Haven't actually tried it, but my guess is that it will go but you still have to yank te handlebars to get it up.

@kiliankrispin4591

4 жыл бұрын

​@@BaconMoto even with the stock bore you dont really have to yank the handebars if you are slow enough

Is it not just better to buy 250 motor just wondering

Just to barely gap 125 fantic or beta damn cant do that much about the weight loss of an enduro bike

Top speed km/h?

Sounds like a 450 😳

@lilwheelz795

4 жыл бұрын

Every 125ccm 4stroke Sounds like that Without the dB Killer

yo bro can u link me the stuff for the 180cc conversion?

@BaconMoto

4 жыл бұрын

Yes of course! I've put the products in the description!

@senkrzy5564

4 жыл бұрын

Would u say it’s worth it to convert it? Good top speed difference?

@BaconMoto

4 жыл бұрын

@@senkrzy5564 I would say yes, The top speed is about 12km/h higher but hits the rev limiter. So i think it will go even higher.

How much did it all cost?

@stacked-racing

4 жыл бұрын

More than the bike itself

v max ?

How much did it cost ?

@BaconMoto

4 жыл бұрын

Never calculated it, let's just say it was a fun project hahah😅

1:47 the tube you connected to the exhaust pipe is the exhaust gas swirl blocker

isn't the stock power 15hp?

@TheFukkface

2 жыл бұрын

At the crank. he's getting 20+ at the wheel, so near 30hp at the crank

@paahtopro3950

2 жыл бұрын

@@TheFukkface hes getting 18 at wheel. no way in hell is it 30 at crank