YAMAHA VIRAGO 535 SWINGARM REMOVAL TUTORIAL INCL. BEARINGS | How to remove the swingarm from XV 535
Автокөліктер мен көлік құралдары
In this video I remove the swingarm and it's bearings from my project Yamaha XV 535 Virago. Full step by step tutorial...enjoy
If you know how to remove the wheel jump here 6:01
#motorcycleproject #bikebuild #viragotutorial
If you'd like to support me with a small donation, you can do it through this link..
paypal.me/lorantgangel1?local...
If you buy any of these products using these links, it will not cost you anymore, but will help the channel out by earning a little commission. Really appreciate it if you do. Thank you
Tools I recommend for beginner/ DIY mechanics
Sealey 4pc JIS screwdriver set ebay.us/IPnnTk
Cheap internal bearing puller kit ebay.us/dqsgMf
Wera 9 piece Long Allen keys ebay.us/jQqlHb
Wera 9 piece Extra long STAINLESS steel allen key set ebay.us/k61h1m
Wera 9 piece Short Allen keys the one in the video ebay.us/GSp19W
Wera 9 Piece Short BALL END Allen keys ebay.us/YwEiE4
Wera 6 Piece Screwdriver lasertip set ebay.us/C1stL5
Clarke CDM35C Multimeter in MachineMart bit.ly/2uNOKA8
Parts I purchased for the Virago 535 build
Swingarm bearing TA2428Z ebay.us/y51L9p
Air filter ebay.us/xBWCSz
Spark plugs BPR7ES ebay.us/n6SKB3
BP7ES ebay.us/yuRqPp
All music and sound effect I use in my videos are downloaded from the FREE KZread Audio Library and requires no attribution.
Any background I use in my videos are all downloaded from pexels.com all pictures there, are free to use in any projects....check them out (Not sponsored).
Пікірлер: 20
It is like CSI Midland:) "Let's remove this bolt, well there are scratch marks so it means it was removed before." Great job.
@MidlandCruiser
3 жыл бұрын
CSI...pmsl🤣 but yes whoever did it was doing a bad job (scratched the swingarm, and didn't bent the tabs back which is a safety issue)
Muito bom , me ajudou bastante, tenho uma 535 , abraço aqui do Brasil Manaus.
I picked up a Viago 1100 for my first road cruiser and I can't thank you enough for all these videos the amount of $$ I save not going to a shop for jobs like this is nuts
@MidlandCruiser
3 жыл бұрын
You are very welcome..if any shop owner reads this😁 sorry😁🤷♂️
Gracias por el video.👌👌 Tengo esta moto once años desd que tenia 19 y no deja de enamorarme
Very Informative and simply explained !!! Great Video, Thankyou for taking the time to post
@MidlandCruiser
3 жыл бұрын
You're very welcome..stay tuned for more😉👍
This video help me alot.. Thank you very much for the detailed information
Thanks so much for sharing this great video with us all.. I'm going to be checking mine soon, so this video has been a great help for me.. Thanks again..
@MidlandCruiser
3 жыл бұрын
You're very welcome. I'm glad you find it useful. The project is going a little bit slower than I hoped unfortunately...I hope to finish it this year though...thanks for watching 👍
Thanks buddy!
Cool Video
Good video. Rusty bolts, why not just soak them in white vinegar then clean them off, use some bluing compound to protect them, good as new.
@MidlandCruiser
3 жыл бұрын
Fair enough. It wasn't in a great condition anyway. The bolt head was rounded off a little so probably will swap it anyway.
@memybikeni9931
3 жыл бұрын
@@MidlandCruiser Ah well yes if that’s the case then replacement definitely needed. I’ve had so many corroded bolts on mine, they do not fair very well.
How did the powder coating go. I would have liked to have had mine chromed but it’s a bit expensive unfortunately. Good video
@MidlandCruiser
3 жыл бұрын
I was thinking about get it chromed, but obviously the powder coat is cheaper, and has good long lasting finish so I went with that....its going to be gloss black because the bike is mainly black so I thought why not have a black swingarm. It's not finished yet, my coater is cheap but slow🤣
Dear Midland Cruiser, we are missing you. Where are you?
@MidlandCruiser
2 жыл бұрын
Hello...I am currently busy with other things in my life and unfortunately I don't have any time to spare for KZread. I hope this will change over the winter and I'll be able to finish the 535 project. Thank you for asking