7:11 for sound comparison

Really appreciate that u mentioned what time the sound comparison is at. Subbed

That thing has a pretty good bark to it. Love it.

This video deserve more views! 😁

Nice note on the 700's, and the pipe looks great

Great exhaust sound.

I like the way u editing the video👍👍👍

Love the sound

Awesome change!! It sounds! Just! Like engine agels singing! Wooowww!

Should be receiving a MIVV for my T7 next week, can't wait 👍

For a stock 2020 Euro 5 exhaust, that T7 std system is pretty damn good.

@6tdegrees

3 жыл бұрын

Yeah! Still gives the T7 a nice note

Great video, made me to choose not to go with this muffler and took my chances with the the Black Widow exhaust. I couldn’t be happier with it. Perfect sound with baffle, sounds like a thumper without being too annoying and has that nice gurgle at low speeds. Also included sealant for the fitting and shipped from UK to US in three days! Didn’t do the conversion but I think it’s slightly cheaper too. Wasn’t about to pay for a muffler that’s 1/10th the cost of the bike….that’s just stupid! I also put my stickers on my cat! 😂

nice roaring sound

Top. My next exhaust

Thanks for the trimmed baffle tip. Without it, it gets annoying over time.

I have this exhaust on the way for my KTM 690 but am also looking at the Dominator HP1 which is a bit cheaper. I find it hard to believe that there's a big difference in sound, they are all just a can stuffed with fiberglass after all.

I recently put a Mivv Suono on my cb500x and it has the DB killer with a hex head nut and a spring washer. It also jas a 2nd inner pipe the also has a bolt to temove it. So you can go full baffle, half baffle or no baffle. It too jas a nice gurgle on engine braking.

How is the can holding up? A bit worried about the carbon cracking up from falls when riding offroad etc. Thank you!

Oh yer, the baffle had to go, sounds soooooo much better without it, I was thinking with it in that this was a waste of money cause the difference wasn't very noticeable (in the video anyway, maybe real life is different) but baffle out, well worth the dollars.

when might the full review be out?

Does this solve the issue of the exhaust being pushed in on a fall, which could bend the frame?

What size bolt do you use for holding the dbkiller in place? And what size drill to drill it out?

Would someone explain to me why you want back pressure for low end power.

"👌🏿"

Where did you buy from?,Im in melbourne..cheers

Did you notice any power loss or responsiveness loss with the new exhaust?

Hello - can you tell me wich nut and bolt to buy to fit the db killer again? I removed mine but too loud haha

You know if the shoulder is made in titanium or steel ? Thank you !!!!

Great video, really helped me to decide that this is the can for my Tenere, thanks! Just a quick question, how did you refit the baffle after drilling out the rivet?

@6tdegrees

3 жыл бұрын

Hey mate. We didn’t end up re-rivet the baffle, we decided to replacing it with a small stainless steel bolt and nut

@mionggg

2 жыл бұрын

@@6tdegrees is there a quicker way to secure/remove the baffle such as a pin, etc?

Yes , I always use a bit of spit to lubricate

@6tdegrees

3 жыл бұрын

I mean, I have gone in dry a couple of times 😅😂

Very nice!!! Btw, what kind of pannier supports are those? Looks good for soft luggage support etc, slim and close.

@jameshind6644

3 жыл бұрын

Mad adventure. You can buy them on ebay.com.au

@biscuitsalive

2 жыл бұрын

I was thinking that too. Will look for Those.

Does it have a spark arrestor?

Does it fit with a centre stand?

Looks great even if you keep it quiet. Half the weight!

Sounds great! How much Total weight was saved with the swap?

@6tdegrees

3 жыл бұрын

Just over 2.5 kgs

Did you try taking the front (Lower end of the muffler) baffle out??

@mionggg

3 жыл бұрын

Curious about this too, how does the front baffle sound differently vs the baffle on the tip.

i wonder what panier pannels are those ? like those better as my yamaha rack's

@biscuitsalive

2 жыл бұрын

mad adventure

If you decat it ( install headers) will it make it louder? Thank you

@6tdegrees

3 жыл бұрын

It certainly will and you’ll need to get it tuned otherwise the bike will run very rich.

Does this need a ecu flash or a fuel re-tune with this slip-on?

@6tdegrees

3 жыл бұрын

If you’re running no DB killer I would recommend a re-tune

Who make those pannier racks?

@roblange1445

3 жыл бұрын

D. Balabastark try MAD Adventure. I seem to remember them mentioning it......

You need to remap it to avoid that bubbly, no? And I'd suggest a DNA stage 1 and 2 filters... hehehe Put on mine and it's a huge difference and improvement.

@6tdegrees

3 жыл бұрын

Pedro DVC baffle out yeah you’ll want to remap

What did you use to hold the baffle back in the exhaust again??

@6tdegrees

3 жыл бұрын

Captain BroadSword a small stainless steal bolt 👍

Guys I removed the DB killer, the sound is very very loud. As much as sport bikes

@6tdegrees

3 жыл бұрын

Babyfasty if it’s too loud you can cut the baffle back with a grinder.

@Babyfasty

3 жыл бұрын

@@6tdegrees Yes as you did in the video?

@6tdegrees

3 жыл бұрын

Babyfasty yep about 30mm I believe. Surprised by how much it improved the sound.

I thought the people of Australia are under martial law, is it true you can only go out one hour per day? I think that slip on looks and sounds great!

@6tdegrees

3 жыл бұрын

zrkn1 I think someone is twisting your arm with that story 😂 but maybe in Victoria haha

@zrkn1

3 жыл бұрын

@@6tdegrees Yeah, that's the story going around here in the states. They even showed a video of an Aussie woman getting arrested for making a negative post about the govt. lockdown on Facebook. Man doesn't know what to believe these days.

@activelycamping

3 жыл бұрын

@@zrkn1 depends on where you live. Melbourne is under a pretty strict lockdown as they had an outbreak of Covid there. A lady was arrested for trying to start a gathering to protest the lockdowns. I agree with her right to protest, but also understand that getting people together like that has a high chance of increasing the spread. Currently USA has 612 deaths per million people whereas Australia 'only' has 33. Hopefully, we can keep it low.

@zrkn1

3 жыл бұрын

@@activelycamping My wife and I are over 60 yrs. old and have never worn a mask while shopping or anything so I would have to say that the virus is not what the media is reporting. If it were as bad as they say there would be millions dead in the US. Probably the worst thing is that the hospitals are receiving vast sums of money for every case they can stick a covid label on. The corruption is so out of control that the US. courts are overloaded with law suits. I'm afraid this nightmare is only beginning. Come November all hell is going to break loose here.

@TLE1977A

3 жыл бұрын

@@zrkn1 good on you for not believing the bullshit hype.

my ears are sensitive also

Like if it should never have a baffle

Yeah fairly sure grandpa would like his new pipe on looks alone 😷

Back pressure myth at large again. These small engines don't see much change from lack of back pressure. Like so little a Dyno won't show it and if one does it could be past on an Dyno set up not back pressure.

no ty overpriced u can get same set up for under 80$ or cheaper

Does it have a spark arrestor?

my ears are sensitive also