Followed this step by step and was able to get this installed no problem..the only to tools I did not have were the side cutters and no mechanical skills at all...thanks for the knowledge!!!

@sportbiketrackgear

2 жыл бұрын

You are welcome, happy to hear it was helpful. - Van

Awesome video. Helped a bunch installing this kit on my R7. Thank you!

@sportbiketrackgear

2 ай бұрын

You are welcome and thank you for watching! - Van

Love your how to vids! I’m about to put one of these on my 21 MT09.

@sportbiketrackgear

Жыл бұрын

Thank you for watching and enjoy your new bike! - Van

The best build series on KZread

@sportbiketrackgear

2 жыл бұрын

Thank you! - Van

This video helped to get mine done. Just toook my time and orginzing helped much more

Awesome video, thanks, just completed this going step by step. Took me 3.5 hours following along, tutorial was perfect. Only warning to others is don’t over tighten when attaching the Yosh kit back to the bike, I snapped a 8mm bolt. I’ll have to find where I can order one or a set of those but for now seems it will be fine since I used some blue lock

@sportbiketrackgear

2 жыл бұрын

Happy to hear this was helpful. If you are unsure of how much torque to use on a fastener and do not have a torque wrench try to get a feel for how tight the fastener was when you removed it and reproduce that when you reinstall it. - Van

Great video!

@sportbiketrackgear

2 жыл бұрын

Thank you for watching! - Van

Yoshimura fender eliminator kit...... superb.... buddy ❣️❣️❣️❣️❣️🤩🤩🤩🤩😘😘😘😘🤘🏻👍🏻

@sportbiketrackgear

2 жыл бұрын

Thanks for watching, I think Yoshimura did an amazing job with this kit! - Van

I cant stop laughing. "This nasty oem tail". I agree!!!!!!!!!!

@sportbiketrackgear

2 жыл бұрын

For sure the fender eliminator is one of the most important mods! - Van

Great videos

@sportbiketrackgear

2 жыл бұрын

Thank you for watching! - Van

Beautyfull nice and stylish bike

@sportbiketrackgear

2 жыл бұрын

Thanks for watching, we are pretty excited about this project. - Van

The pieces with 3 plastic clips. I need advice as on the clutch side the 3rd clip will not click into place. It will always pop out. I put this project on hold since I realized I might need a pair of hands. Any advice would be greatly appreciated. Happy 4th!

@sportbiketrackgear

2 жыл бұрын

I would make sure you have the panel properly aligned, odds are an edge is getting hung up. - Van

What's the tool called you use to pop rivets out? Would be a lifesaver!

@sportbiketrackgear

2 жыл бұрын

That is just a small pick with an angled tip. - Van

Is the Yoshimura frame required? I like their kit the most and eventually want the sequential signals, but dont care much for the frame itself. Would probably just roll no frame if workable or a simple black. And would this work for a 2024 R7? Im assuming the '23 & '24 are basically the same

@sportbiketrackgear

4 ай бұрын

This will fit all years for the R7 and you can use it without the plate frame. - Van

@KaliFlower666

3 ай бұрын

​@sportbiketrackgear Appreciate it! I got it nearly all installed but need to do the wiring still as I ran out of time. I'm looking at getting the plug-n-play adapters they have so I don't have to splice or cut anything. Tutorial definitely helped me getting the bike apart though!

Can i use the original turn signals with this fender eliminator?

@sportbiketrackgear

Жыл бұрын

Yes that is that we did with this install. - Van

What is the red connector next to ECU ?

@sportbiketrackgear

2 жыл бұрын

Sorry I do not know off the top of my head and we are flying out to Laguna in the AM. - Van

Van, can you get Yosh to get this kit out for the '21- MT-07 already? My emails fall on deaf ears!

@sportbiketrackgear

2 жыл бұрын

I will shoot them a note. - Van

@1991CALYPSO

2 жыл бұрын

@@sportbiketrackgear 🥲

Wonder how many 2022 R7 buyers know about Sanford and Son. Funny shit.

@sportbiketrackgear

2 жыл бұрын

Now that is some good tv! - Van

Is this license plate adjustable?

@sportbiketrackgear

Жыл бұрын

No the license plate is not adjustable. - Van

The link goes to the MT-9 ...... this right part?

@sportbiketrackgear

2 жыл бұрын

No, I have just edited the link. - Van

@metalmavenmike80

2 жыл бұрын

@@sportbiketrackgear awesome thanks Van!

Why dont u just use wago? Much better than using heat. U Are damaging the cabel

@sportbiketrackgear

2 жыл бұрын

I have been doing this for over 30 years now. 100% what I showed works and will last. - Van

Is this eliminator illegal??

@sportbiketrackgear

5 ай бұрын

That depends on where you live. If you are concerned about it you should check. - Van