Yamaha r1 front fairing stay bracket instrument cluster replacement
Replacing my Yamaha yzf r1 4c8 front upper fairing stay bracket after it broke
Жүктеу.....
Пікірлер: 45
@stevemulcahy50144 жыл бұрын
This video was really helpful for the R1 we picked up cheap, we thought either the carrier was broken or the rubber grommets on the carrier weren’t put in by the previous owner, so ordered a new fairing bolt kit because it was missing other bolts and held off on the carrier. I watched this, took the mirrors, windscreen and damper off and found the front fairing was loose because the PO didn’t fully tighten those two bolts holding the carrier :-|. But I also got a chance to take the old brake lines off, so was able to get the front sorted with your help. Thanks, mate! Hopefully it’ll be all sorted for some track days next year.
@ragecage20117 жыл бұрын
i just broke that exact brace. LOLOL thanks a brunch for helping me 2005 r1 . i also broke the left side mid fairings upee brace. i found both on ebay oem cheers mate
@Scoochin6 жыл бұрын
hey man, i liked, idk how to show much more support than saying his helped me 100%. thank you, my dude
@azzkam8972
6 жыл бұрын
Rad Kev I'm glad this helped I appreciate you letting me know peace dude.
@ahadqayamali95424 жыл бұрын
Dude thank you so much for this. Helped a lot. For some reason mine didn't wanna go on properly so I had to pull off the side fairing but in the end it all worked out. Thanks again 👊🏾
@azzkam8972
4 жыл бұрын
Ahad Qayamali glad it worked out mate
@av28008 жыл бұрын
great video mate, super HD and well done, thanks!
@michaeldavis-yh1yf2 жыл бұрын
Extremely helpful. Thanks again for your assistance.
@bobeyes3284 Жыл бұрын
Hi mate. Cheers for the video. I have a 09 Big Bang. Fingers crossed your video will get me close.
@TheCthtoNicfLy7 жыл бұрын
bro thank you so much i was lost now im an expert
@markmcg891214 күн бұрын
Very helpful- thank you!
@mbnette4 жыл бұрын
So I am wondering how you got the new bracket to slide so easily over the two metal posts coming off of the frame??
@raymondbautista5256 жыл бұрын
I Want to do a conversion to my R1 2004 front fairing and headlights to 2007 ..it this whats possible?? Thankss
@casethomas82492 жыл бұрын
Why my front holder not lining up wit side fairings after changing that bracket
@mervinkarthik24817 жыл бұрын
how to change front body of R1 2016 into 2014 R1 front body
@nocturnanthem42934 жыл бұрын
just wondering, its r1 2008 body kit plug and play to r1 2006-2007 models?
@ruelsomiyaya24886 жыл бұрын
The same problem to my yzf r1 2010 my stau bracket is broken and now dont have available here in philippines waiting from USA
@colton7608
6 жыл бұрын
Ruel Somiyaya how are you guys breaking these
@ruelsomiyaya2488
6 жыл бұрын
colton stil waiting my upper stay bracket from australia my friend
@gibronnaqeelandries3406
4 жыл бұрын
@@colton7608I wheelie a lot that y
@zrider15912 жыл бұрын
anyone experience with aftermarket stay if it´s fitting?
@johnykryll5 жыл бұрын
Thanks, good job. Is all that front end heavy?
@azzkam8972
5 жыл бұрын
Johny Hewitt thanks it’s not that heavy
@johnykryll
5 жыл бұрын
Cheers fella
@Hotmomsonly2 жыл бұрын
Need help boys broke the headlight cowl bracket on my r6 and I can’t fain videos in how to install it
@distilledpusswater84734 жыл бұрын
I have 2000 r1 forks on my 2001 r6 and was curious would a r1 front fairing be hard to pair with my r6 fairings currently have a front r6 fairing on but was just curious
@azzkam8972
4 жыл бұрын
DistilledPuss Water sorry mate I don’t know let me know if you find out.
@elreks16 жыл бұрын
My cowling and lowar farrings i can't get it to hold in side the slides
@casethomas8249
2 жыл бұрын
Me neither
@godinez355 жыл бұрын
Sir. Im riding r1 2014. But cant find the 2014 model bracket. Do 09-12 fits r1 2014 for this bracket?
@azzkam8972
5 жыл бұрын
Aizuddin Arman sorry mate I don’t know I hope you find it soon.
@evilmuscle6 жыл бұрын
How did you damage the stay 1
@azzkam8972
6 жыл бұрын
evilmuscle practicing wheelies probably
@azzkam89728 жыл бұрын
2007 4c8 model
@jimmyblack1736
8 жыл бұрын
salaam brother.roza mubarak.
@azzkam8972
8 жыл бұрын
Walaikum salaam brother Ramadan kareem.
@jimmyblack1736
8 жыл бұрын
+Azz Kam i see loads of r1 videos but first time seen a brother so humble. its nice to hear u say things like bismillah before u start ur bike these little things make me feel good.enough love from bradford.
@azzkam8972
2 жыл бұрын
@Qᴜɪᴄᴋ Sᴀɴᴅ wa alykum salaam warahmatullah
@MasterKeyMagic2 жыл бұрын
I cannot get the harness out of the back of the speedo to save my life. what am i doing wrong
@azzkam8972
2 жыл бұрын
I remember it being extremely tight! Most likely you just need to put a bit more force
@MasterKeyMagic
2 жыл бұрын
@Qᴜɪᴄᴋ Sᴀɴᴅ Yeah i was afraid to pull it out by pulling on the wires but that was the only way i could pull it out
Пікірлер: 45
This video was really helpful for the R1 we picked up cheap, we thought either the carrier was broken or the rubber grommets on the carrier weren’t put in by the previous owner, so ordered a new fairing bolt kit because it was missing other bolts and held off on the carrier. I watched this, took the mirrors, windscreen and damper off and found the front fairing was loose because the PO didn’t fully tighten those two bolts holding the carrier :-|. But I also got a chance to take the old brake lines off, so was able to get the front sorted with your help. Thanks, mate! Hopefully it’ll be all sorted for some track days next year.
i just broke that exact brace. LOLOL thanks a brunch for helping me 2005 r1 . i also broke the left side mid fairings upee brace. i found both on ebay oem cheers mate
hey man, i liked, idk how to show much more support than saying his helped me 100%. thank you, my dude
@azzkam8972
6 жыл бұрын
Rad Kev I'm glad this helped I appreciate you letting me know peace dude.
Dude thank you so much for this. Helped a lot. For some reason mine didn't wanna go on properly so I had to pull off the side fairing but in the end it all worked out. Thanks again 👊🏾
@azzkam8972
4 жыл бұрын
Ahad Qayamali glad it worked out mate
great video mate, super HD and well done, thanks!
Extremely helpful. Thanks again for your assistance.
Hi mate. Cheers for the video. I have a 09 Big Bang. Fingers crossed your video will get me close.
bro thank you so much i was lost now im an expert
Very helpful- thank you!
So I am wondering how you got the new bracket to slide so easily over the two metal posts coming off of the frame??
I Want to do a conversion to my R1 2004 front fairing and headlights to 2007 ..it this whats possible?? Thankss
Why my front holder not lining up wit side fairings after changing that bracket
how to change front body of R1 2016 into 2014 R1 front body
just wondering, its r1 2008 body kit plug and play to r1 2006-2007 models?
The same problem to my yzf r1 2010 my stau bracket is broken and now dont have available here in philippines waiting from USA
@colton7608
6 жыл бұрын
Ruel Somiyaya how are you guys breaking these
@ruelsomiyaya2488
6 жыл бұрын
colton stil waiting my upper stay bracket from australia my friend
@gibronnaqeelandries3406
4 жыл бұрын
@@colton7608I wheelie a lot that y
anyone experience with aftermarket stay if it´s fitting?
Thanks, good job. Is all that front end heavy?
@azzkam8972
5 жыл бұрын
Johny Hewitt thanks it’s not that heavy
@johnykryll
5 жыл бұрын
Cheers fella
Need help boys broke the headlight cowl bracket on my r6 and I can’t fain videos in how to install it
I have 2000 r1 forks on my 2001 r6 and was curious would a r1 front fairing be hard to pair with my r6 fairings currently have a front r6 fairing on but was just curious
@azzkam8972
4 жыл бұрын
DistilledPuss Water sorry mate I don’t know let me know if you find out.
My cowling and lowar farrings i can't get it to hold in side the slides
@casethomas8249
2 жыл бұрын
Me neither
Sir. Im riding r1 2014. But cant find the 2014 model bracket. Do 09-12 fits r1 2014 for this bracket?
@azzkam8972
5 жыл бұрын
Aizuddin Arman sorry mate I don’t know I hope you find it soon.
How did you damage the stay 1
@azzkam8972
6 жыл бұрын
evilmuscle practicing wheelies probably
2007 4c8 model
@jimmyblack1736
8 жыл бұрын
salaam brother.roza mubarak.
@azzkam8972
8 жыл бұрын
Walaikum salaam brother Ramadan kareem.
@jimmyblack1736
8 жыл бұрын
+Azz Kam i see loads of r1 videos but first time seen a brother so humble. its nice to hear u say things like bismillah before u start ur bike these little things make me feel good.enough love from bradford.
@azzkam8972
2 жыл бұрын
@Qᴜɪᴄᴋ Sᴀɴᴅ wa alykum salaam warahmatullah
I cannot get the harness out of the back of the speedo to save my life. what am i doing wrong
@azzkam8972
2 жыл бұрын
I remember it being extremely tight! Most likely you just need to put a bit more force
@MasterKeyMagic
2 жыл бұрын
@Qᴜɪᴄᴋ Sᴀɴᴅ Yeah i was afraid to pull it out by pulling on the wires but that was the only way i could pull it out
is it OEM or aftermarket bro ?
@azzkam8972
7 жыл бұрын
Jorgenava29 oem
@azzkam8972
7 жыл бұрын
Jorgenava29 oem bro
I took mine off without taking off the dapener