Best dt on yt, looks soo clean and perfect...

@SandeProd

6 жыл бұрын

Daniels Dinsbergs Thank you! :)

@retardracing9409

6 жыл бұрын

Second best atm because u ex dt is nicer

@SandeProd

6 жыл бұрын

Niko Kuparinen Thank you! I will try to make this even nicer.

@tobes4942

6 жыл бұрын

Watch stekarne yamaha dt project!

@bellybuttonrevealat100subs9

5 жыл бұрын

the stickers ruined it smh

Really nicelely done! I have a DT 50 for years in my garage and at times I was really hungry but no matter how hungry, or low on money at times I got I never would sell the bike =D Now years later things are doing better... and maybe in a year I have the time and money to rebuilt it!

@SandeProd

5 жыл бұрын

Thank you. Wow, I really respect your dedication. I hope you will be able to rebuild it soon!

absolutly stunning bike, great job!

@SandeProd

5 жыл бұрын

Thank you!

Nice bike!

@SandeProd

6 жыл бұрын

Thank you!

You are so talented m8

@SandeProd

6 жыл бұрын

Oskar Machaj Thank you.

Congrats, well done 😉👍

@SandeProd

4 жыл бұрын

Thank you!

Awesome build 😍

@SandeProd

5 жыл бұрын

Thank you!

first time i see someone break a am6 gearbox.. Nice💨💪

@SandeProd

5 жыл бұрын

Thanks! 😂

You did a really good job ^^

@SandeProd

6 жыл бұрын

Thank you.

Ihan vitun hieno detsoni ja video oon nyt vrm viimesen viikon aikana kattonu tön videon joka pv vähintää kahesti ja sillo ku tää tuli ni kahtelin tätä kans. Hyvä video tee lisää!

Brutal dt! 💪💪

@SandeProd

5 жыл бұрын

Thanks!

So badass build bro. Im planning to rebuild the engine of my 1998 DT50 . Do i repaint it first or assemble the engine before repainting it?

it looks silly with that rear suspention lifter. stock hight would look more clean. otherwise great build :)

@SandeProd

5 жыл бұрын

I agree, I am a tall guy and I hated the stock height so I had to put a small spacer for comfort. Thank you!

@ecvideos8130

2 жыл бұрын

@@SandeProd did you put the spacer at the bottom of the rear spring or on top? how many cm?

Bike looks Sick man!!

@SandeProd

6 жыл бұрын

Thank you!

@motofreak2287

6 жыл бұрын

Sande No problem whats the topspeed?

@SandeProd

6 жыл бұрын

110km/h with 13-53 sprockets.

@motofreak2287

6 жыл бұрын

Sande awesome!

Unelma DT😋👌

For about how long did this awesome build take?

@SandeProd

6 жыл бұрын

About 5 months.

Love it dude ;)

@SandeProd

6 жыл бұрын

Thanks!

in morocco we have the 1988 dt 50 125 360 but never managed to find a dt 2007 or higher and i don't know why

What type of black paint did you use for the fairings? Thinking about respraying my DT and putting new stickers on because the old stuff is factory and is 12 years old now.

Magnifique projet 😈😈 j'adore vraiment

@SandeProd

5 жыл бұрын

Merci!

Would have been perfect if we could have heard her at the end, but still very good video, the bike looks sooo clean.

@SandeProd

3 жыл бұрын

Thank you! You can hear her in my most recent videos.

You have a very good clip on Yamah restoration or may chanel.

Dope af!

@SandeProd

6 жыл бұрын

Thank you!

nice bike :) my brother used to own one of these it was fun as hell... and also that dt was the begining of my love for 2strokes arent they amazing?

@martinandreas6486

2 жыл бұрын

Incredible bike!

Nice Bike !!!

@SandeProd

5 жыл бұрын

Thank you!

Yes, baby let's go.😁😁😁

The bolt that goes trough the front rim. Did you hammer it in or did you screw it in? I can see some threads on the bolt but mine oes straight trough the fork.

best yamaha🤘🤘 u rock

@SandeProd

5 жыл бұрын

Thanks!

Iha saatanan kaunis peli mut usd keulan oisin laittan tai jonku muun keula ku toi näyttää hiuka piänelt.

@SandeProd

5 жыл бұрын

Kiitoksia, usd keula tulos.

My dream bike man, right now i have a peugeot with 70cc tpr, 21mm, and stage 6 replica exhaust it rides like a dream but really want one with gears just cant afford it ): Great video btw

@SandeProd

6 жыл бұрын

Nice. 👍 Thank you.

@laurik5401

5 жыл бұрын

Why u dont sell it and then buy yamaha dt?

Aika namu😍🔥

Where do you bought your seat cover. Have searched for a seat cover but i cant find it

@SandeProd

6 жыл бұрын

From mc-scatter, it is a Finnish store.

I want to hear her

@SandeProd

6 жыл бұрын

I will make a video of it!

@zMrCex

6 жыл бұрын

Sande thank you man ❤️

@PROD.R4VEN

6 жыл бұрын

Roni Kolehmainen tarkotti pärrää...

@Masai69

5 жыл бұрын

@@PROD.R4VEN no älä vittu

@PROD.R4VEN

5 жыл бұрын

@@Masai69 siis roni kolehmaine oli kommentoinu jostai muijast jotai nii vastasin sille ettei tarkottanu ihmistä mut se on poistanu oman kommentin

Yamaha TD 70/ 50 chainbracket BIG Siz wow fastest fantastic race..I 👍 YAMAHA...

Do you have any profit margins when selling your bikes or do you go all in and don't care if you might not go profit on your builds?

@SandeProd

5 жыл бұрын

I always lose money with these projects but it is ok because that is not the point. I love doing these projects so if I dont profit it is not that big of a deal.

@SNTMoto

5 жыл бұрын

Alright i see, thanks for the fast answer :D

is it anything i should think about before spray painting my engine black??

I'm thinking of a 80cc airsal , 24mm pwk carb, stage6 hpc crankshaft and scr corse 70cc. What do you think?

@SandeProd

5 жыл бұрын

I think that's a good configuration for that 15hp. Go for it. 👍

God job!

@SandeProd

6 жыл бұрын

Thank you!

Were did you buy seat cover?

Fico mo chave fião"

Where did you buy the seatcover?

Where do you buy your'e parts and what spray do you use?

How wow what a project ! Just is that normal that the moto looks weird on the pictures it looks like the back wheel is very near of the motor no ?

@SandeProd

6 жыл бұрын

It always looks weird in pictures.

You replaced the transmission with a stock one , or is there something aftermarket ?

@SandeProd

6 жыл бұрын

New stock one.

Sick af

@SandeProd

6 жыл бұрын

Thanks.

The blue DT in the start where are the graphics from mate?

where did you get the decals from?

I've built one myself. Alot more powerfull tho ahah. How did you manage to break the tranmission? Mine's holding pretty nicely to 25 Horsepower...

@SandeProd

6 жыл бұрын

The engine is very old and used and had always been 50cc so it didn't handle the 70cc...

@DANRACINGPERFORMANCE

6 жыл бұрын

Hmm sounds plausible ahah, altough for it to break that way it seems that the gearbox had been under stress like failed burnouts etc.

@SandeProd

6 жыл бұрын

Yeah that is possible but I just rode it pretty carefully but still it broke.

Can you give link where you buy this graphic?

With what paint did you paint the frame with?

Nice 👀👊🏼

@SandeProd

6 жыл бұрын

Thanks.

One of only a few tuning storys who are getting a like from me

@SandeProd

5 жыл бұрын

Thank you. I appreciate that.

sick

Where did you buy the new plastics?

where did you buy the seat cover?

Onko tossa häkkikoroa ja millä maalailit osia mm. T-palat, takaiskari, runko ja takaswingi? Itelläki Dt proju edessä niin haluaisin tietää. Hieno on!

@SandeProd

5 жыл бұрын

Kiitos! Ei oo häkkikoroa vaan 5 cm koropala iskarin alapäässä. Runko sun muut osat on hiekkapuhallettu ja maalattu sitten ruiskulla kestävällä semigloss mustalla.

where did you get these graphics? really clean bike!

@SandeProd

5 жыл бұрын

Thank you! Revline MX Graphics.

@megad1523

5 жыл бұрын

can you make a video of the bike sound?

Where did you buy the decal kit?

where did u buy all the plastic fom?!?

Where did you bud the new plastic?

I want to build a 50cc bike like this and put a 70cc or 100cc cilinder on it, but i was wondering if i can still ride long distances on it (sometimes a few hours) without problems or will the cylinder get too hot?

@SandeProd

3 жыл бұрын

You can, but you have to have a good cooling. Condsider an aftermarket fan on your radiator.

@Rick-du6xq

3 жыл бұрын

Sande thank you!

Where you got this seat cover?I want same to😅

How long did it take you to rebuild it?

Millä maalasit rungon? Ruiskul ihan normimaalil?

@SandeProd

6 жыл бұрын

Ammattilainen maalas ruiskul juu.

Hey nice video, im thinking of buying an aprilia rs 50 which has the same engine as yours. Is this engine easy to rebuild, is it reliable as a 70cc? Thank you.

@SandeProd

6 жыл бұрын

It is very easy to rebuild and even as a 70cc it can be very reliable.

@fin_4427

6 жыл бұрын

I also have an rs 50, putting my malossi 77 big boar and del auto carb in this week:)

Where did you but the seat cover?

Is it possible to change only the cylinder from 50cc to 80? Will other things last good or not? Sick bike tho🤤

@SandeProd

5 жыл бұрын

Usually you don't have to do much for the engine itself except bottom end bearings, crankshaft and clutch. But you also need to buy a bigger carburator 21mm+, intake manifold, air filter, reed valves, exhaust...

@SandeProd

5 жыл бұрын

And thank you!

@megad1523

5 жыл бұрын

So If i wanna make 125cc license is it smarter to buy a 50cc bike and modify it to 80cc or buy a 125cc which costs 1K-1.5K more than a 50cc

@Maikhoust

5 жыл бұрын

@@megad1523 125cc is probably the better option. In Finland it's literally a war woth papers to register a moped as a 125cc and in the end 125cc is cheaper.

@megad1523

5 жыл бұрын

@@Maikhoust i live in estonia:/ and i like the way a 50cc looks more compared to 125..

what a pleasure to have a bike like this omfg

@SandeProd

6 жыл бұрын

Thank you!

Nice

Hella nice

@SandeProd

6 жыл бұрын

Thanks.

Can you pls make a video how to remove seat?? I don't get it.

This is what means "high end"

Hello, I'm looking for some vinyl for my bike and the only ones that I liked are those that you have ridden. You could pass me the link to buy them?, I can not find them anywhere. Thank you

@SandeProd

5 жыл бұрын

Hi! I'm sorry but they are custom made so they cannot be bought from anywhere. The company that made these is Revline MX Graphics.

Where did you buy the graphics?

where did you buy the graphics?

Hey man I just got my malossi short neck and stage6 r/t 26mm pwk carburetor for my dt50r 07 like your bike. But my air filter doesn’t fit it’s so small between the back fender and carburetor I don’t what to do. The air filter is a stage6 double racing how did you fit yours?

@SandeProd

4 жыл бұрын

I just pushed it in there. It wasn't perfect but it worked. Later I made one myself from a Pipercross filter to fit perfectly.

@anglofil5489

4 жыл бұрын

Sande thanks for the answer. i got it to work I ordered a justable intake that goes 360 so you can spin it around. Also had to get a malossi e13 for it to fit! :-)

Where you get graphics for your old bike?

@SandeProd

6 жыл бұрын

Tapesnake, but it doesn't exist anymore. Now it is called Revline MX Graphics and you can find it in Facebook.

Hi, i have a friend that is selling a yamaha dt 50cc lc (BUT I DONT LIKE THE LOOKING OF THE LC ) i can put the dt 50 r plastics in the lc ? (with someone know pls tell me ) thank you. AND I LOVE YOUR BIKE, NICE JOB

where you bought the decals

Are these like uk bikes because I've never seen one in the US but I feel like I need it. Street legal would be awesome. Can you make them street legal and registered?

@SandeProd

6 жыл бұрын

I don't know about uk but in Finland, Sweden etc... we have alot of these. And yeah they are street legal.

@Nograc_

6 жыл бұрын

Sande I need one geez street legal too😭

@Nograc_

6 жыл бұрын

HeK thank you. Here in the US we have the old 1970 and 1980 dt 125 250 and 360. But we also have moped and anything past a 50cc is registered as a motorcycle and have different laws and you have to get a m class license

@razor6589

6 жыл бұрын

ye in germany they are called supermoto and are something between street bike and enduro and they are street legal

@Nograc_

6 жыл бұрын

Raz or we have supermoto but I just like this cross between moped and dirt bike

how can airsal have so much hp to crack the transmission have never seen any like it for airsal

Mist noi tarrat😍

@SandeProd

3 жыл бұрын

Revline MX Graphics

very nice dt sold my dt 2 months ago, because the engine block broke can you make a soundporn

@SandeProd

6 жыл бұрын

Thank you, I can try. :D

@fahrverbot3365

6 жыл бұрын

ok ty nice

nättiä jälkeä!

@SandeProd

6 жыл бұрын

Kiitoksia!

tekantti sai kivan tilauksen sulta :)

where did you buy that seat cover?

@SandeProd

5 жыл бұрын

Mc-Scatter. It is a Finnish shop for moped parts etc.

where did u buy decals?

please tell me how the fk u changed the airfilter, or got the "airbox" out, cant get it out of the carburettor and out of the frame of my Dt,

@SandeProd

6 жыл бұрын

I had to disassemble the rear end of the bike completely to get it out.

the rear shock absorber is different or is the original one? if it is different what brand is it?

@martinandreas6486

2 жыл бұрын

Im wondering too…

good jobb

Mint😍

Wow!

@sande where do you Buy This red graphics set from ?

@SandeProd

5 жыл бұрын

RevlineMX Graphics

@timoiepsma1506

5 жыл бұрын

And then you have to send a mail or is There a webshop en do you have link of iT en btw very Nice bike by far the cleanest and the best video keep going!

how many rpm can it go ? my dt50 is normally stuck on 8000 and sometimes 9000 how do you get the high rpm's ?

@SandeProd

6 жыл бұрын

I don't know, I haven't checked. But I think that it can go something like 12-13k?? And you have to have an exhaust that can go that high so the powerband is higher. You can't do that with stock exhaust. And then cylinder makes a big difference too and cylinder mofidying. If you want to go even further you can buy new ignition, like MVT Digital Direct... Everything affects it.

@matsu9996

6 жыл бұрын

Drill from middle of your cdi box with 15mm drill bit. I did it and worked really well. -Sande's managerteam

Where did you Buy the stickers and the seat cover?

@SandeProd

6 жыл бұрын

Stickers are from RevlineMX Graphics and seat cover is from mc-scatter.

@wmparkour7094

5 жыл бұрын

@@SandeProd can u send a link for the stickers? Would be nice!

@santeri.3644

5 жыл бұрын

@@wmparkour7094 its a custom graphics kit..

how much did the build cost you and the bike? is it worth it?

@SandeProd

5 жыл бұрын

Well alot and no it wasn't worth it but it was fun!

What is the decal kit

I know this is an old video but where is the gasket that is going between the 2 engine blocks in the gasket kit?

@SandeProd

4 жыл бұрын

In AM6 engines there is no specific gasket for it. You have to put gasket mass between them yourself.

@enfuzzygamer4987

4 жыл бұрын

Thanks for the help! Now i can stop looking for one haha

Itte oon just 86 tpr laittamas rieju mrt:hen,voca 80/90 yläkautta tuleva,mvt premium kisasähköt ja tpr 44mm kampiakseli ja stage 6 28mm kaasari. Onks tietoo mikä tulppa ja missä lukemissa pää suutin liikkuu?

@SandeProd

4 жыл бұрын

BR9ES/EG toimii mut ite tykkäsin BR10EG. Pääsuutinta 140 lähtisin kokeilee ja siitä sit pienempää tai suurempaa tarvittaes.

Table is decals from?