PSA FOR ANYONE WANTING THIS PRINTER. I currently own two of these and they really only have 2 main issues that can be easily fixed. 1. "I can't use third-party filament" So, you actually can use third party printers as long as you use a NFC NTAG(213) This printer operates by reading a source code that is inside of the spools holder, it's basically a simple chip that says the printer will only allow you to print till the spool is empty, so you can actually keep the spool holder on and use another filament of your choice as these spoils technically have a mileage to them i.e. 200 - 300 m per spool permitted. By using an NFC NTAG (paper data chips) you can very easily code these to have 300 m and then when the "mileage" is up, you can simply reset the chip. 2. The XYZ app will not allow you to use this method and will detect it as a bypass. So, to bypass the bypass ironically..just don't use the default app the printer says to get. Instead use free softwares like "3D print" and "3D builder" both of which are Windows 10 softwares that are compatible with most printers including this one. If anyone has questions about this printer I can try and answer them here. Hope this helps!

@thebokchoyboy92

4 жыл бұрын

@@bkkorner This is the easiest way, it's actually a very easy thing to do I just ellaborated every step.

@thebokchoyboy92

4 жыл бұрын

@@bkkorner The print has an integrated nfc chip and won't run unless it counts milage on the filament nfc chip. Honestly they come in packs of 20 for like $5 max you really only need one.

@arianasanchez2811

3 жыл бұрын

Is it complicated to code?

I've recently got one myself and I'm very content with the quality. To prevent the product to detach from the printbed I use pritt glue. Just rub it over the printbed and use the spatulla to see if you mist a spot and smear it out right before calibration and printing . No more lose products

@SPDATA1

4 жыл бұрын

Thank you!

The new software now allows you to slice layer by layer. I just downloaded it before buying to test. They have changed a lot since this video

use hair spray or paper glue to stick your models to the bed for the filament u can buy nfc tag for 1$ you can find the nfc software on google store for 1$ you can use any filament you like

in Australia officeworks i bought this and twice i returned it because of nozzle clogging on the second print both times. got a flashforger printer for $180 more and am very pleased with its performance

Most thorough review of a 3D printer.

Think I'd recommend an Ender 3 over this for a cheap / ''Budget'' Printer. The amount of compromises made with the Mini Da Vinci is understandable riiiight up to the part of not allowing for other filament brands to work with it, like one of those junker coffee makers that demands you only use its own brand with its machine with a barcode reader, Nope.avi The Ender 3 also has a rather sizable community so you'll have plenty of support out there to optimize it.

@iftibashir

5 жыл бұрын

After looking at the Ender 3, I agree! kzread.info/dash/bejne/aHmNtrSIm7fUeJc.html

I had the bed issue so I got rid of the tape and used normal printer paper i cut to shape and even giant overhangs with no support stick though you mostly have to replace it depending on the print size

I have been using it for 5 years. its a freaking good printer especially for its price. When this printer came out the major complain was the filament restriction. It can be bypassed nowadays with a nfc sticker and a android app (called 'reeltool21'), no big deal! If you can find this printer second hand, buy it! i am buying another one tomorrow for only €40

@xkuai3670

3 жыл бұрын

Hey, do you know where I can find any video or tutorials on how to bypass the filament restriction ? I'm planning to get this 3D printer, someone sells it 120€, that's cheap ! But you got luckier haha where did you find it so cheap ?

Thank you, that is an insightful presentation and clarifies things.

I was thinking about getting this printer but when you said I can't use third-party filaments I was like nope

@capti7555

6 жыл бұрын

me to

@normcaissie5598

6 жыл бұрын

way better printers out there.

@brianrichards3777

6 жыл бұрын

You can use third party filaments but you have to bake sure it is the right size, 1.75mm

@LogicIsForPussies

5 жыл бұрын

@@normcaissie5598 like what

@CydiaTesterForFun

5 жыл бұрын

I am going to release a video soon on how to use any filament if that is of any interst to you

What a concise review! Thank you. I saw someone using a glue stick for the bed problem.

@iftibashir

4 жыл бұрын

I ended up using double sided masking tape in the end, which worked well.

Please review the monoprice select mini V2! It’s only $200 and it comes with a heated bed

Does anyone know how to connect the plastic tube back onto the nozzle? I've disconnected mine and cannot reconnect it. I have a different printer than in this video. Mine has a metal thing on the end of it

Bought this unit 2 weeks ago. I am trying to make a plain wedge shape. any ideas please.

If you are getting in to 3D printing you should look in to a IIIP Mini it is only $100 and it has a head bed way less problems

why does my printer shed slits of plastic? like there will be little strings of plastic coming off of my prints. Any idea how to fix this?

What if you always make a bigger base for your model, would that solve the Problem of 3d models lifting?

Should I get this or the mp select mini?

I'd go for the Geeetech Pursa I3 as it can print with wood polymer, nylon and abs. It's only £4 more on Amazon. But you do have to make it yourself. :/

for the non heated bed problem I just use double sided sticky tape

@rodan9187

5 жыл бұрын

Same

@Bubble_Nugget

4 жыл бұрын

Good idea

@ronbond9766

4 жыл бұрын

perhaps"LOCTITE" SPRAY ADHESIVE"( you can buy little, 4.oz cans), spray just a bit onto paper where idea will form, should work fine.

@watch726

3 жыл бұрын

you could also use a glue stick thats what i use

@animationking8647

3 жыл бұрын

You can also use hair spray

Have you tried flypaper? That might stick the print down until it's complete

I have a problem with da Vinci w The pla dont go out of the nozzle Some suggestions? I have one for beginners heat the bed with a hair dryer to 30°C and I guarantee the object stick on the bed really good

Thank you for a very informative and good vid.

How do you add in a different color of filament for this printer?

Lower the sensor that's not in the instructions?

Can you sand/paint the completed models?

Do I need a special cord so it can get what I want to print from my laptop? And if I do need one does it come with the printer?

Its been really updated. XYZPRINT Suite is available. Make an update vid

Ok I have used 3D/cad computer software wares before so can I load CAD drawings and outher file types that are 3D related? Or use a 3rd party software to creat a 3D model and send the file to the Da Vincis print ware and print it?

@terriblycharismaticduck2717

4 жыл бұрын

victor van grim gamming Yes.

My school recently got one and when I’ve been trying to get it set up we haven’t been able to get the printer to show up on the computer. When I have the software loaded and scan for a printer it doesn’t find it even when it’s plugged in via usb. How can I fix this?

hi, I have recently approached 3D printing and I am wondering how to print objects with an overhang of 60 degrees or more, they tell me that the printing program should automatically create supports for printing but it doesn't happen with this printer, do you know how I can solve? Thank you

Great video review of the Mini, best I've seen yet. 👍🏻 On a side note: isn't there an auto feed function when loading new filament like there is on the Da Vinci Jr.?

@goproguyreacts5301

6 жыл бұрын

Xerber - no

@PizzaCat1732

4 жыл бұрын

yes

You did not need to force the filament through the guiding tube, it can automatically do that

Explains why I see so many of these at Goodwill.

Thank You for this review.

@iftibashir

3 жыл бұрын

My pleasure!

I have it for 3 weeks and find it is not as user friendly as advertised. Expect to waste a lot of the expensive filament. Items with solid base and not so intricate parts do fine if glue is applied to platform. Others require supports. Glue is key. Be sure it doesn't dry before starting print. Interesting concept, but I just am not feeling it is something I could recommend. Already had a filament break and a filament jam.. software is pretty simple to use.

@ronbond9766

4 жыл бұрын

perhaps"LOCTITE" SPRAY ADHESIVE"( you can buy little, 4.oz cans), spray just a bit onto paper where idea will form, should work fine.

I've had this printer for a couple of months now, and the problem you say when prints don't stick to the surface is easily solved with just going over the surface with a glue stick. I've never had a problem, my prints can instead sometimes be hard to remove when finished!

@SPDATA1

4 жыл бұрын

Tack för ditt svar.

use ABS filament?

Very helpful video, thanks! Was/am thinking of getting this for cosplay. I have a Flash (Barry Allen) costume and wanted to make some wings for my mask AND boots...this "might" work.

Replace the mobo with an off the shelf one and you can print any filament.

@iftibashir

7 жыл бұрын

Will have a look into this! Thanks!

@MACARIO813GAMER

5 жыл бұрын

It has a NFC chip

Can I buya any branded pla filament?

Anet a8 is till the best for begginers with a nozzel upgrade to 0.2mm

The site is so god damn slow, and the app doesnt do anything. when i click any of the apps in the suite it does absolutely nothing. Just got a "Proxy Error" on their site as well.

Does anyone know where I can download xyzware 1.0 from?

In order to keep the print stuck on to the bed you use a glue stick it even says it on xyz maker

@iftibashir

6 жыл бұрын

Glue stick did not work for me either.

@carrissatorres731

5 жыл бұрын

you just run the glue over the sheet at it will stick?

So i got this bc of this video and I’m having major troubles installing it on my Mac book can someone help me

@Mr.VinceKeK

4 жыл бұрын

sell ur mac and buy a laptop with microsoft.

@ronbond9766

4 жыл бұрын

That stinks, :/ Perhaps, you can pay a computer guy to spend an hour with you on the download etc... processes of your computer in regards to this creation machine or any other such type of devices, might be worth the $$$ to find how to or... what the hang up issues/s may be, good luck, hope it works out for on this.

Thanks man, bought one for 20 bucks at goodwill

@frickd_it

5 жыл бұрын

wait really. dang it costs 10 times that

@shamarrj123456789oab

4 жыл бұрын

Mr. Dogg damn gg

@pr0xZen

3 жыл бұрын

Just paid $100 today for mine. But it came with a bunch of filament, spool adapters and nfc tags tho.

Merci, ce formidable

I don't know where I have to put the chip it is really small and I don't know where to put it please help me

@iftibashir

6 жыл бұрын

Which chip?

Anyone having trouble connecting the printer to a computer? I've tried for hours and i'm ready to take it back to the store.

@iftibashir

6 жыл бұрын

I always used it via wifi.....

hey i am looking into buying this printer but just before i did i wanted to ask, i am going to be printing fidget spinners and will the prints fall off the print bed

@DFRANSO

7 жыл бұрын

please reply as soon as possible

@al3xmassie110

7 жыл бұрын

my friend has this printer they have had a few problems with the prints sticking but as long as you make sure there is a large area touching the ground it should stick pretty well

@crmusicproduction

7 жыл бұрын

Hi brick, I have one of these and they are excellent for fidget spinners

@DFRANSO

7 жыл бұрын

chris randell thankyou I am going to but it as soon as possible

@crmusicproduction

7 жыл бұрын

will you be designing your own? There are tons of spinner designs on thingyvers too

Where can I download these models or any models?

@iftibashir

2 жыл бұрын

Thingiverse is a good place to start....

Anet a8 3d printer is probably the best bang for the buck at $170

I don't like the fact you have to buy their own filament at high prices as the reels are chipped.

Proprietry filament is fricking insane

ty this might help my wife into letting me get one..i can only hope

@UwU-rp7vi

4 жыл бұрын

nunya your business did she let you get it?

@ronbond9766

4 жыл бұрын

@@UwU-rp7vi Yeah, it's been a couple years, did you get this one or a better one, does your wife like it?

@UwU-rp7vi

4 жыл бұрын

Ron Bond that’s good man

Can you use thingiverse with it

@iftibashir

3 жыл бұрын

Yes you can find models to print, download them, and print them for yourself! ;o)

It only accepts DaVinci filaments ??

@MACARIO813GAMER

5 жыл бұрын

L Castro Yes

@PizzaCat1732

4 жыл бұрын

yes, don't buy it

if you get this printer and need strong filament use their carbon fiber filament

@watch726

3 жыл бұрын

also if you go to buy some overture filament from amazon and it comes with a pad and there is no glue or tape required just trimming with scissors

Great in depth, layman's description and review. I'll shop for an more expensive, but to watch for "NOT LOCKED INTO ONLY"(thanks to this 5star review), "able to use/buy any company's filament spools, to find/use creating software, "OF A VARIETY OF SORCES, NOT "LOCKED INTO" ONE MANUFACTURER'S PRODUCT LINE", etc... Great information shared here, all of you commenting, great sharing here, thanks! Oh... specifically regarding, "IDEA CREATION, "NOT" STICKING TO BASE PAPER, perhaps"LOCTITE" SPRAY ADHESIVE"( you can buy little, 4.oz cans), spray just a bit onto paper where idea will form, should work fine. Thanks you all!

It is a good printer, but does not stick a lot of the time

can you design your own models?

I have mine I am printing adapters for scuba mask/ covid19 respirators

I would even forget about the propretiary firmware but one thing that made me not respect this company is no linux software despite of what's written on specification page. Plus they've encrypted access to GCODE so it's barely usable with alternative software.

For everyone watching this who is having trouble with the printing bed. Try covering the bed the blue tape and squirt it with some nail polish. That will make it stick.

Anyone seeing this now, five years later, if you want a good 3d printer, get something from the creality ender 3 lineup.

intresting

very specific

I won 1 just like this 1 & just got it friday 9-7-2018 .I won it from Camel Cigarettes .

@lisajones6839

5 жыл бұрын

I won one too from Camel and came up here to see what it does. Good Review and good on letting you know how to set it up.

@jackyblue67same10

5 жыл бұрын

Are u keeping urs Lisa or selling it ? I'm gonna sell mine .

@raichugirl19

5 жыл бұрын

me too lol

@jackyblue67same10

5 жыл бұрын

What u gonna keep it or sell it ?

I love your accent.

When it’s under 20°C you got a put glue on it

I'm so glad I didn't get this printer. Ender 3 FTW!

@iftibashir

5 жыл бұрын

yes, Ender 3 is much better! - kzread.info/dash/bejne/aHmNtrSIm7fUeJc.html

for 300$.. no

Buy 2 days a go a davinci mini for only 30€ , because the seller says to me printer never printed and she didn't know why , The security was stil stuck to the extruder 😂

Thanks for saying it can only use one brand of filament, dodged a bullet there I will definitely avoid this brand now

Use a glue stick on the bed tape and you won't have a problem with your print job.

If you use a glue stick, the project will stick to the bed, and it will come off easily. This is what I do

@corinaskywalker

3 жыл бұрын

Can you explain this? I just got this model and looking to play with it but I don’t want to waste filament

@yoitsuncle9421

3 жыл бұрын

@@corinaskywalker1) make sure to lower the extruder where you will get the best print (you can do this by printing the sample or a small cube, to where it sticks on for a bit) 2) use a small amount of a glue stick where the print will be

@corinaskywalker

3 жыл бұрын

Seems simple enough, thanks!

Guys.. go for the Creality Ender 3 NOT THIS

@iftibashir

5 жыл бұрын

Ender 3 FTW! kzread.info/dash/bejne/aHmNtrSIm7fUeJc.html

@ronbond9766

4 жыл бұрын

Will search it... thanks! a couple of you here mention that one, very good share, if/when I were to buy one, they are super cool, I'll do research on all things mentioned here, I'll pay more, but the freedom to choose filament, software etc... matters big time! Thank you all.

Kirby

It sucks xyz is a fraud company when I used standard pla filament it broke

@JoJo-sw9hi

5 жыл бұрын

thats because you can't use any other filament than xyzs.

@therandomchannel1388

5 жыл бұрын

I did use XYZ filament

This is good only for hobbyist. For commercial purposes you need to use a CNC machine.

@mashmellow6793

5 жыл бұрын

Generally, 3D printing is for hobbyists. It is viable for commercial prototyping, and I know Prusa is using their printers to make more printers.

QUITE little

as soon as you said proprietary pla... i lost interest, fuck that.

@yourjdmboirich3104

6 жыл бұрын

samljer what does proprietary mean

@pheenix42

6 жыл бұрын

Proprietary means exclusive to the company and you can only use their product with the machine.

@yourjdmboirich3104

6 жыл бұрын

Alonzo Branson ok

I'm sorry but 4 hours for that tiny batman bust at 0.4 mm layer height is not acceptable by any means. You will almost never be printing at 0.4 mm unless you just need a quick and dirty part for something. A print like that should take around 2 hours. Not double. Add that to the fact that there is no heated bed and major adhesion problems, as well as absolutely everything being locked down to their own (and may I say horrible) software. The software they call a slicer has nowhere near enough flexibility to get any real prints once you get into models that are even remotely complicated. This printer is not worth $300 in any way.

та ну, залупа!

DO NOT buy this in 2020, now that 3d printing is more accessible than ever, there are such 3d printers like the anycubic i3 mega and the ender 3 that are loads better than this printer at the same price

@Darkeiser.7

5 ай бұрын

Wish I did more review searching. Nothing is compatible with it today.

Print bed sucks.

free d printer ??? Do you mean three d printers???

Xyz printing is terrible, just buy an ender