This was the last 3d printer they made I believe, right? That was like 2016, hope they make another soon, and this time with wifi/bluetooth lol.

go into your setup and check energy saver to turn it off. Then the light will stay on.

Hello, what is the maximum printing speed of this device. I like to print on max sped for the filament on my 3D printer which is 80 mm/s. Can I achieve this speed with this 3D printer. Thank you!

XYZ’s SLA temps are 220 for the nozzle and 70 for the bed, no fans needed. 😁

I dont understand this cup is your test print? 1h ... time?

Ever had trouble with the part not sticking? I bough a printer today but when printing the star cup once it started the third layer of colour the part became dislodged from the class and stuffed the print

@RandomPete

7 жыл бұрын

I have run in to that a few times now, i was acutely going to make a video on that issue i have had with this printer and some ways i have over come that issue. biggest thing was starting with a clean bed i have been clearing it after every print and that seems to be the biggest thing to keep them stuck. also i use a lot of glue some times and put it on as late as possible before it starts printing

Would you know of any reason as to why the printer won’t connect to my computer?

great job.

Pete, did you smell a lot of fumes. If I am correct you said you placed it in your office. I have a duo that I just unboxed and am worried about the fumes. So I just wanted to know if the housing holds in most of the fumes. I notice the handle on the door has a gap that fumes could escape but some tape over that would probably suffice. Thanks for letting me know if there were a lot of fumes so I can rest easy.

@RandomPete

7 жыл бұрын

+drunization I could smell a very small smell nothing I was concerned about. Different filament types will off gas more then others. I've only used the ones that came with it so far.

@loganschwang7401

7 жыл бұрын

drunization the filament it came with is probably abs which gives of a strong smell from what I have heard

@jdk201111

7 жыл бұрын

you only get fumes with ABS. PLA has almost no smell.

Which kinds of 3D printer you recommend to use it commercial bussines please ?

@RandomPete

6 жыл бұрын

Sami AL Humairi with the sheer amount of printers out there today you can get really good prints off a $500 printer. The prusia printers are nice for the price but have only used one 2 times for short periods of time. Then there's Ultimaker printers that are very good printers in my opinion and are much more expensive. Unfortunately I don't have the hands on with as many printers as say Makersmuse or 3d printing nerd does. Recommending a printer for you particular need is hard. If your doing alot of prototyping and stuff along those like I would probably get a more high end printer. Wish I could be more help.

this is great thanks!

What filament do you use in XYZ Da Vinci 2.0?

@RandomPete

7 жыл бұрын

So far i've only used the PLA. I Will be getting there other ABS and water soluble filaments soon. And will be making a video on those filaments.

How did you cut off all those little zipties?

@RandomPete

6 жыл бұрын

+Jennifer Valero small pair of side cutters

Can you next time let us hear real noise? And how it long to take print small statue.. like 10cm ? and how much it will cost in 2 color materials? Thanks

@RandomPete

6 жыл бұрын

+Rodier Ratafakus found out afterwards that my mic was not working. What kind of status would you like me to print? Anything in particular.

da vinci 3d printers are open source??

@RandomPete

7 жыл бұрын

Victor Hugo Sosa M. No they are not open source there are ways to load 3rd party software on to it.

Wait... does this model also have DRM in the filament cartridge? Gah... I'd get one if I can use any filament I have.

@RandomPete

5 жыл бұрын

You can get the chips on ebay or make your own to trick the machine so you can use your own filement

@TechyBen

5 жыл бұрын

@@RandomPete Thanks! I really want a dual extruder, and someone is selling one locally cheap, but I don't want to get scammed on expensive filament... wondering if I can mod the entire control board to skip out the scam of DRM. :P

@RandomPete

5 жыл бұрын

@techcyben belive there a 2 diff models a early and late-model that you can reflash the board and have new software to run everything its been a few years since I read up on it do some Google searching on molding this printer and you will find it

@TechyBen

5 жыл бұрын

@@RandomPete Thanks. I would guess it's a newer model. Local purchase and comes with about 6 cartridges.... so even if I chuck it away after those run out, it's paid for it's self. XD

Does xyz still suport printing with that printer

@RandomPete

5 жыл бұрын

Not sure what you mean. Mine works if you mean fireware updates or something along those lines I haven't updated that in a while.

@metro9203

5 жыл бұрын

@@RandomPete I'm sorry for the the lack of description! I figured it out but what a meant to ask was if the newer xyzprint software supported it but I just went back to older version of XYZware now it works, thanks anyways!

Dude could you send me a copy of the files on your sd card. mines fried and i have a new one.

@RandomPete

7 жыл бұрын

what files are you looking for the firmware or the test prints?

@foxtrot1787

7 жыл бұрын

just the test prints. I use them for calibration. I have major issues with calibration on this printer. using the calibration utility results in filament jams.

WARNING.... If you buy or have this printer take the scrap trays out and bend the metal tabs down and out of the way. These metal tabs will wipe the tips off of the hot end. I have one and I lost the left tip on my hot end after 6 months of use. Of course the warranty was over $160 to replace so now I only have one tip now.

out of a 10 star grading what would you rate this printer? i am looking to get it to further making phone cases and paintball parts with it. is the quality good and do the prints look good? can you see the different layers that the printer printed on? if you can answer these questions for me since you personally own one. also if you could subscribe to me @Matthew Nuckles so when i get it you can give me tips on what to do

@RandomPete

7 жыл бұрын

Thanks for watching. I would say a 7 out of 10 , you can see the layers but you see lays with FDM type 3d printers the parts i have printed have come out nice and exactly what i designed and needed. i have made some multi piece parts that fit together nicely.

@matthewnuckles7122

7 жыл бұрын

Random Pete does your parts that go together move together?

@RandomPete

7 жыл бұрын

No i made a stock to hold my VIVE controllers for shooting games. It was to big for the printer to print in one piece so i made them interlock and glued them together

@matthewnuckles7122

7 жыл бұрын

Random Pete could u email me at mskeeteraces18@gmail.com so i can ask you more questions please

@RandomPete

7 жыл бұрын

Here is my email rrandompete@gmail.com I will do my best to answer your questions

Great video but you need a different camera, it was constantly blurring the subject.

@RandomPete

4 жыл бұрын

Thanks. That was the first time using a dslr camera and didn't know you could adjust focus manually. The auto focus on that partcluar camera is not the best.

Rather hear the noise from the printer than the noise from that music

I can't calibrate it, you could make a video about it. Calibration is very difficult on this printer, do not buy it !!!

@RandomPete

5 жыл бұрын

Yes I had to calibrate mine. And was very tedious. I may make a video on that.

The print is shit!!

piece of junk printer properly one of worst product to ever be brought out in customer history after the xbox 360