Many thanks for the great review. I really appreciate it. Based on your review, I have bought one of the XY-P15W and I will do the following: (a) Add a heatsink to the IC. (b) A small fan (c) use 2 nos. of 30 w Taoglas speakers SPKR.6.8.A (d) use a smps 24v @ 4 amps and update. Thanks again.

@raydenlucca9026

2 жыл бұрын

You prolly dont care at all but does someone know a trick to get back into an instagram account..? I somehow lost my password. I would love any help you can offer me

@jonahmarc5153

2 жыл бұрын

@Rayden Lucca instablaster :)

@raydenlucca9026

2 жыл бұрын

@Jonah Marc thanks for your reply. I got to the site through google and Im in the hacking process now. Takes quite some time so I will get back to you later with my results.

@raydenlucca9026

2 жыл бұрын

@Jonah Marc It did the trick and I actually got access to my account again. Im so happy! Thank you so much you saved my ass !

@jonahmarc5153

2 жыл бұрын

@Rayden Lucca Happy to help :D

Highly suggest adding a heat sink. I blew mine. Maybe subpar chip. But for 3 can / 2 us, ordered another. I do like this mini amp.

I am going to purchase this 😅👍 Edit :- I got This 🔥

Hi, just bought this amp. Can i use 12V 7Ah gell baterry? If it is possible, can you please reccomend some speakers. Goal is to make a portable wireless speaker.

I love how mind blown you sound ! So am I too really!

@josephtuatty7982

3 жыл бұрын

Where can i get the bluetooth amplifier module sir? Excellent sound.

Sir please help me as i am having that board but it produces a high pitch noise feedback everytime it plays(not in standby).can you please please please make a video on troubleshooting the noise problem of such amps?

What speakers are those? They look like a nice modern design.

What are the speakers OHMS that you used ? Great review

@als-techreview

3 жыл бұрын

Thanks bro 👍 those seakers are 6 Ohm

XY-P15W mantap, suplai 12,6v

Hi! How is it compared to XY-AP50H? In terms of the sound quality? Thanks! 🙂

Can I connect 20watt speaker to this module?

My speaker sounds are breaking with same specifications can you please help

Out of all the Mini Amps you have reviewed, which do you think has the best sound quality?

@als-techreview

3 жыл бұрын

All the nobsounds/douk audio sounds good. Usualy TDA boards for me have nice sounds.. Not all but there are quite few TPA which can deliver good sound.. But there are some little boards like this that just blow me away with sound quality and power.. It's hard to tell which is best, because this are results that I get on my speakers. Sound can vary from speaker to speaker..

@mariohernandez-cu5vb

2 жыл бұрын

I have a question: could I use this amplifier with a 3.7v lipo battery using a DC-DC step up converter? Would that work?

I tried it with a 18.5V power brick and it works. But when i try it with a 24V 35W brick it doesn't turn on. Do you know why?

Hi I have a problem with the speaker I made with this amplifier.. I used 7.4v 2600mah and 2*10w driver and when I put it at 80% volume I hear crackling noise.. please tell me how to fix this.

@musicalsoul5205

2 жыл бұрын

@Jesrel Sunit Hi I guess the optimal voltage should be near to 11.1 v. By that you may be able to give sufficient power to the amp board. Mine is TPA3110D2 with 11.1v 3s Cell, and till now, no such issues. :-)

How many volts does it accept according to 12 to 24 volts?

@vincegreat544

2 жыл бұрын

Both

Does not connect to via bluetooth 5.0, with samsung galaxy m51. What could be the reason?

I'd like to use this as a school Technology project. What are the possible ways to power this?

@Lithium09

2 жыл бұрын

There's hardly anything diy here.

Can you test tpa3118 sanwu board

Can you test "Mice on Venus" at full volume? I bet it will distort bad.

Idol... Very nice tiny amp... 12v?

Ossum Where to buy that power supply box

Speaker wattage?

Bro need your help, pam8610 or xy-p15w?

@ahmadwisnu4651

3 жыл бұрын

Pam 8610 is best

How does it sound compare to PAM 8610 ? Please advice

@Vinit_nobody

Жыл бұрын

Better than that i can guaranty that and the bonus that it comes with lot of protection and bluetooth 5.0

Sir, is it possible to connect two 6 ohm, 5'' speakers ,30 watts power on a single channel in this amp. I am having a pair of 4 ohm tweeter and a pair of 6 ohm woofers....... Pls suggest a method 🙏🙏🙏🙏

@als-techreview

3 жыл бұрын

It should work fine 👍 Try to connect them, then reduce the volume before start playing music and slowly raise up the volume to prevent any damage..

@gijogeorgenetticadan9995

3 жыл бұрын

@@als-techreview thankyou for the instant reply❤️🙏

can it work with one 50W 4ohm speaker from a 12V 5A power supply ??

@Vinit_nobody

Жыл бұрын

nope

Where place can I bought !

how is the bass ?

Wow

And this Bluetooth Amplifier it has a switch?

No aux input?

Bluetooth amplifer ka prince kiteana he😍😍😍😍

@muhammadluqman391

Жыл бұрын

660 draz pr

Sir I need same circuit to operate 4 ohm 5w speakers can you recommend me recommend that these circuits without some annoying sound of "Bluetooth Connected" Like that.

@asikaje4982

2 жыл бұрын

PAM8403 (built in bluetooth version) or PAM8403 (without built in bluetooth) + bluetooth receiver losless 👍🏽

@mayurmane2963

2 жыл бұрын

@@asikaje4982 thanks sir for ur recommendation

what is the bluetooth codec?

how to wire 2 of bluetooth modul for 4 speakers guys ?

Push the button you got a pause 😉

Haw to connect to laptop sir...

Mine when conmected, its says loudly ure bluetooth device is ready to pair. How do i remove this sound??? Someone HELP

This Bluetooth Amplifier is need to add a heatsink?

@als-techreview

3 жыл бұрын

no this one no.. but it always good to have an aditional cooling radiator on..

Can i use four 5W 4ohm speaker in this board

@BD.News360

8 ай бұрын

Yes 😊

I am getting quite a bit of noise with it. Try the following experiment. Bring up the volume on the phone to max, play some music, and then bring down the volume on it to minimum. You get a constant hum sound.

@tsaitaj

3 жыл бұрын

Maybe use battery or any other source of electricity

@bjov76

3 жыл бұрын

@@tsaitaj The power supply has good capacitors, so it keeps playing when I unplug it for cca 15 seconds.Still humms when unplugged - same noise. Capacitor can not hum :) Also tried grounding it and shutting down all other electronic devices. No luck.

XY-P40W ?

Can I play 12w+12w speaker from this circuit.. please 🙏🏻 reply....I want to buy it

@als-techreview

Жыл бұрын

HI, yes I think you can.. As long as you not overpower the speakers.. In this review I tried on my Sony speakers 60W of power each for example.

👍👍👍👍🇧🇩

will work with a subwoofer

Supplied power? Volt and Amp?

@als-techreview

3 жыл бұрын

24V - 10A in my case.. But you do not need such big amperage.. 3A is more than enough..

@cuongnguyenphu4972

3 жыл бұрын

@@als-techreview Hi sir I can using 12v-5A or not?

@als-techreview

3 жыл бұрын

@@cuongnguyenphu4972 sure you can 👍

@cuongnguyenphu4972

3 жыл бұрын

@@als-techreview Tks sir I'm trying now.

hi, Does the aux signal go in to the 2 way splitter?

@LM-kb6yt

3 жыл бұрын

It has no aux input

Price???

@campradt

3 жыл бұрын

$3.81 AUD on aliexpress cheaps as!

Hey man your audio running that through self amplified monitors... let’s see it on a plain speaker!