XP Deus top tips | graphic screens hidden features
Ғылым және технология
Metal detecting skill school with the XP Deus this time we are talking about the Deus screen graphics and discover some hidden features and techniques you may not know about.
- Find distributors next to you: bit.ly/XPresellers
- Chek out the XP detection blog: bit.ly/XPBlog
- XP Forum: www.xpmetaldetectors.com/xpforum/
- Subscribe to the XP newsletter now ➡️ bit.ly/XPNewsletter
If you want to talk with other XP users why not visit the XP Technical Facebook group :
/ metal. .
Watch more XP videos over at the metal detector skill school :
/ gardansolyn
----
Follow us on Instagram: / xpmetaldete. .
Follow us on Twitter: / xpdetectors
Follow us on Facebook: / xpmetaldetec. .
Follow us on TikTok: @xp_metal_detectors
Пікірлер: 86
Can believe I'm still learning new tips after having the Deus for many years. Many thanks Gary.
@The-skillschool
3 жыл бұрын
Good on ya Rob, same with me👍
I haven't had the Deus very long...and had been curious about it foe a number of years until I finally purchased one. Gary, I personally want to thank you for all of your videos so far I have watched quite a few of them and I feel almost like I may go bonkers...but that said. There is so much you can do with this machine or so little....and you tell about all of what you can do, or just tune to a program and go. That is what is so sweet about this machine. Can turn on and go in so many modes and yet tweak anything if this or that...I figure if you read this you know what I am talking about. There is so much more to this machine than I EVER thought there was at first. It seemed like there were some things that can be changed her or there as most high end detectors, but there is so much more . The only thing I can honestly say that I don't like about this machine is that the bottle caps ring in so high. Where all of my Minelabs in the past I would pull maybe one or two of them...and those where usually right on the surface. I scrub the surface with my coils so that's the reason for that. Don't want to notch that high signal out but why??? Do those ring in so high when they are of the iron type metal. I just don't understand. Other than that I love this machine and never thought I would say that about any machine other than my CTX 3030.
Always learn something new watching your vids Gary, never stop learning and improving your use of this amazing bit of kit cheers !
Thank you. I wish I could give another thumbs up every time I watch these videos because I learn a little more each time. I have set the graphics to XY on the program I use most and it has been a tremendous help. Thanks again.
Very cool about the emi check feature, thanks for all you do Gary! It is much appreciated.
@The-skillschool
3 жыл бұрын
Thank you sir 👍
well done Gary, well put and very knowledgeable vid, keep them coming.
Hi Gary, Excellent as always, Ive been out 3 days in a row now with my new Deus- every time I come back I watch another of your great videos and I have somwthing new to try tomorrow. :0)
@GTAKRAYZ
2 жыл бұрын
Same here 😁🤙 got the xp deus few days ago only been out twice and got my first coins 🪙 with it after learning from Gary about the discrimination settings great machine shes a beast ,..
Gary, thanks for the tips. Help my understanding of the Horseshoe VS the XY screen greatly. Keep up the good work.
@The-skillschool
3 жыл бұрын
Thanks for watching James 👍
Another excellent video, thanks Mr. Gary!
@The-skillschool
3 жыл бұрын
Thanks for watching Nick 👍
These are so helpful, thank you for doing these!
@The-skillschool
3 жыл бұрын
No worries Steve
Brilliant video, thank you Gary learnt a lot from you, only been doing metal detecting 7 week now started with vanquish 340 (great all round machine cant fault it as a starter), but then i upgraded to a XP DEUS after loving metal detecting so much, got it few days ago and your videos really helped me soooo much i was abit 🤔💭 at first but then soon got used to it thanks to you and crew, iv only used it twice and only on basic 1 mode both times , the second time i used it i upped the discrimination to 44 and got my first coins one is a Irish farthing 1950s was well happy 😁 the other not been identified yet its really worn,.. the machine is a beast very happy with it 😁🤙🤙🤙
Nice one Gary, The X/Y screen is my graphic of choice.
@The-skillschool
3 жыл бұрын
Mine to 👍
Very interesting, as always ) Thank you!
Fabulous video. Still learning about the Deus. I Love XP 🙌🏻👌🏻👍🏻
@The-skillschool
3 жыл бұрын
Thanks my friend 👍
great videos, thanks for the info :) learning a lot
Thank you. I am very new. I find myself switching to the xy to learn more about the target. Good to know that I can change the graphics. Most of the people that I try to learn from seem to ignore the xy. I appreciate all that you have to teach.
@The-skillschool
3 жыл бұрын
Thanks for watching Danny.👍
Thank you very much Gary, it was very interesting.
Learned a lot today. Thank you
@The-skillschool
3 жыл бұрын
Glad it helped Cliff👍
Thanks Gary great tutorial 👍
@The-skillschool
3 жыл бұрын
Thanks Brian 👍🤝
Great video and loved the tips!
@The-skillschool
3 жыл бұрын
Thanks #xpteamusa 👍
Enjoyed this video and appreciate it. Cheers. W.
Gary Your videos have helped me out big time can’t thank you enough 👍 I had deus lite for a while then last week bought the RC I’ve got sniper/ultimate program installed on it now
@The-skillschool
3 жыл бұрын
Nice one Dave thanks for your kind words.
@daveanness
3 жыл бұрын
gardansolyn honestly Gary you’ve helped me big time with my deus learned a lot from your channel if I could buy you a pint I would 😉👍
Live and learn that’s for sure... Thanks Gary... Best Wishes CMNW 🏴
@The-skillschool
3 жыл бұрын
Thanks buddy, good to hear from you. 👍
thank you for the tips! thanks you Mr Gary
@The-skillschool
3 жыл бұрын
Thanks my friend 👍
Thx for the tips G.
@The-skillschool
3 жыл бұрын
You're welcome my friend 👍
Good video! 👍 But we probably don't have to wait "a few minutes" for the zoom setting to be saved 😀 6:45
great tips Gary, love w a thing your tip videos !!
@The-skillschool
3 жыл бұрын
Thanks Al, keep up the good work guys, your water hunting videos are awesome 👍
@alancarpenter6826
3 жыл бұрын
@@The-skillschool thanks !!
Thanks for the tips I learned a lot
@xpmetaldetector
Жыл бұрын
Thanks for your support
Good video's im watching them all to learn my New deus☝🍻🍻
Xp ORX needs this XY screen as well.
Hello again Gary , I have not received a replete my query regarding loss of ground id number from my screen when attached to the coil ? If i am not within range of the coil when turning on the deus the ground balance remains at 90 . i have also noticed that the machine sometimes tracks when using in the field with the numbers 73 - 75 appearing spasmodically I would very much appreciate it if you could provide me with an explanation or remedy for this situation ,Thanks Bandidoripp
Merci pour ta vidéo gary On ce verra au prochaine detectival A moin que l'on ce voit avant j'espere The first fan
Top tips there pal
Thank you!
@The-skillschool
3 жыл бұрын
You are welcome sir
@user-fv1uo4ut2o
3 жыл бұрын
Александр,вкратце,что он сказал?
Great video, Gary! Would you say that the zoom feature is the visual equivalent to audio response?
@The-skillschool
3 жыл бұрын
Good call Grant well said, thanks for watching 👍
Hi Gary! 😎Thanks as always for your videos. I have had the ORX for 1 year. Currently, I already have DEUS 5.21. (2 weeks ago🤩) After looking at your explanations in this video, the Zoom option is not clear to me. I only speak Spanish🙃, and I always use the subtitles of that language. But apparently, when you explain about the Zoom, the translator of the subtitles is not very accurate. Could you reiterate this explanation of that option? . In some next video, I mean. Thank you. Regards😉
Ive only been out once since i got my deus 1 chirstmas 2023, yesterday, and i couldnt find an audio volume settig, so i just clipped the remote on my camera strap so the camera could hear the tones loud and clear, so i havnt used any graphics yet, but the downside to this is i dont know the tones yet, so i dug everything But did dighing everything ever pay off yesterday, i found 2 sterling silver rings, and a tungsten carvode ring, which i think was a larger mans wedding ring, because i am larger and its the only ring ive found that fits me 😂 I also found a piece of junk jewelry, a blinger capital T letter, and a couple links of a iron chain in the same hole So i had a good first day with the deus, hopefully its a sign of things to come, ive been in that same field a dozen times with the legend, so its even possible i swung over those rings before and missed them
does this quick zoom and emi feature same on deus2
hanks for the top tips Gary , I appear to have lost the ground I D number from my screen when attached to the coil ? If i am not in location distance from the coil the numbers appear ass normal usually at 90 Can you tell me what the problem is please . Thanks
@Jpcars636
2 жыл бұрын
Be interesting to find out keep me posted when Gary tells you mate cheers
Good 👌🏻👌🏻👌🏻👍🏻👍🏻
Do you have any hot tips for us deus light users. Apart from buy a remote. I have had mine about 18 months now and had some good results. But is there any tips for improvement. Im not the brightest bulb in the lamp but willing to try. Thanks for all your time and effort. 🐝😷
@The-skillschool
3 жыл бұрын
Let me have a think, thanks for your suggestion 👍
Gary, thanks for all of your splendid video’s. I have got a question: what do you mean when you tell us it is possible to search for the EMI? Greetings, Kees from the Netherlands
@The-skillschool
3 жыл бұрын
You can use the zoom method to see what direction the EMI is coming from. Very handy if you are getting false signals through EMI.
@paulwhite3637
3 жыл бұрын
EMI stands for electromagnetic interference, and is usually caused by a high power source........like overhead wires, other detectors and sometimes even your mobile phone. Try changing the frequency on your Deus to eliminate the EMI, possibly lower your TX gain or even adjust your sensitivity. If it’s another detectorist that’s causing you problems, have them change their settings. I hope that helps. 👍
Come on xp how about a multi frequency upgrade for the x35 coil
Hi gary what you know about the xp deus machine and the way you talk about it makes me think sometimes that you could of invented it
@The-skillschool
3 жыл бұрын
No idea sir, they have not asked for my thoughts.
The XY Screen for an Future Update of the ORX?...that would be great..Does anyone know more about it?
@The-skillschool
3 жыл бұрын
No idea
@geoffrey2803
3 жыл бұрын
@@The-skillschool Thanks for an Answer Garry... Like all your Vids...pls keep it up 🙂👍
Mozes li mi nastelovati prgram za plazu
in the end i dont anderstand ist long range or what???????? gary please answer
😁👍
And the curve graphic?
@Yngwiejmalmsteen08
2 жыл бұрын
What is curve graphic?
Yo quiero un ORX ......es que es muy caro e. Argentina y no lo puedo comprar💔😭
лайк
En français SVP!!!
Quand est-ce qu'on a le droit à des vidéos en FRANCAIS !!! pour une marque française achetée par beaucoup de Français !!! 😡🤬