This video, does not show the most CRITICAL part of the install, the mounting of the vertical posts. In this video, that is skipped, and not mounted to concrete, but to a steel sub structure. Most installations will be into a concrete floor. And it's my understanding they provide wedge type bolts for the install. What diameter are these? Also I see videos that I agree with to not use the expanding wedge type but a epoxy system specific to anchoring high tensile threaded rod into the drilled and cleaned hole. Concrete is very good in compression, easy you can exceed 6000PSI, but in tension it fails, and that's typically rated at 350PSI, very low, the wedge type fastener puts the concrete in tension, and will pull out under dynamic loads. And they become dynamic when the whole vertical posts swing back and forth with a vehicle on them, which will work a wedge type fastener out of the hole. Once the concrete is cracked from this stress, it's permanent.

hi

500 bucks for a lift that works great you really can’t buy anything else or look anywhere else 👍

@f.hababorbitz

Ай бұрын

$2950USD is the current price I'm seeing on their web site. $2500USD eBay.

This video does not show measurements on the post layout, nor does it show how to bleed the system once installed.... not a good video!