XERUN XR10 PRO V4 now cheaper.

Ғылым және технология

Welcome back to Wtf Rc Cars
XERUN XR10 PRO V4 now cheaper.
XERUN XR10 PRO V4 BLACK £139.99
www.racing-cars.com/new-produ...
Contact me at wtfrccars@gmail.com
Kits available from
rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777
info@rdmodels.co.uk
Opening Hours Mon-Fri 9.00-5.00 / Sat 10.00 - 4.00

Пікірлер: 35

  • @Truth12345
    @Truth1234511 ай бұрын

    I also build drones and I have seen multiple test that shows when putting capacitors this far away from the esc doesn't do much in filtering/spikes. I don't get it why they keep doing this in rc car esc's.

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    From time spent at multiple tracks they just seem to prolong the life of the esc mainly down to sharing the load from the inbuilt ones on the esc

  • @Truth12345

    @Truth12345

    11 ай бұрын

    @@WTFRCCars I think it's more placebo. It's not without reason that the better esc's have the capacitors directly near the esc.

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    @Truth12345 Yep definitely better to have em as close as possible but they do help with ripple at higher rpm too and that lowers the temps on the FETs the solid state caps work even better too

  • @Truth12345

    @Truth12345

    11 ай бұрын

    @@WTFRCCars Like I said I have seen test with drone esc/motor that pull less amps. I assume that the rc car esc that pulls more amps the results will be even bigger. They tested with 3 ways: Putting the capacitor on the battery connector Capacitor on very short thick lead to the esc thermals. Directly soldered to the esc. Capacitor on the battery connector had negligible effect. With a short lead to the esc was somewhat effective. But still a night and day difference between the capacitor directly soldered to the esc.

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    @Truth12345 yeh will definitely work better the closer you can get it to the + and - of the esc :)

  • @robertkotevski9649
    @robertkotevski96494 ай бұрын

    Great video mate, whats newer the xr10 pro g2s or the xr10 pro elite g2s ,whats the difference? Iam confused lol

  • @WTFRCCars

    @WTFRCCars

    4 ай бұрын

    Both of them are new, the none elite has a cageless fan,temp controlled fan and think it has polarity protection, think the elite has normal fan don't think it has polarity protection but both are the new 32 bit architecture but it's best to check hobbywing site for all the specs :)

  • @robertkotevski9649

    @robertkotevski9649

    4 ай бұрын

    @@WTFRCCars so the black one is the better version , cheers mate

  • @WTFRCCars

    @WTFRCCars

    4 ай бұрын

    @robertkotevski9649 You will need to check as when I was looking at the specs they had only just been announced so specs may have changed especially with firmware updates :)

  • @michaelhavlena923
    @michaelhavlena92311 ай бұрын

    How does one know whether they have the 32 bit version or not?

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    It would be a xr10 pro G2S or Elite G2S

  • @xrayray3d192
    @xrayray3d19211 ай бұрын

    Looks like the bec is either 6.0 or 7.4 and nothing in between

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    Tbh I'd only ever run at 6v so I get a constant performance out of the servo if I'm running 2s :)

  • @xrayray3d192

    @xrayray3d192

    11 ай бұрын

    Absolutely. I only race touring cars and run 6v for the consistency as well. Btw great video series on the Noble NB4, I watched one of your videos on the throttle spring! In regards to the bec comment, I just wanted to point out where they could have downgraded the esc to cut costs.

  • @xrayray3d192

    @xrayray3d192

    11 ай бұрын

    Correct me if I am mistaken but did it not have a remote power switch?

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    @xrayray3d192 The xr10 pro older versions did at some point but the new V4 one doesn't

  • @macmondo74
    @macmondo7411 ай бұрын

    I could be wrong but I do not think this is the V4 ? I think the settings are different, this appears to be the older 30112600 sold for £124.99 on MB Models. I think the V4 on the Schumscher site may be incorrect. Still a fantastic ESC and price. The V4 has a different fan also part number 30112613 and the Elite with a seperate power switch. currently priced around £189

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    This is the new Xr10 Pro v4 there is also the new 32bit xr10 pro with shroudless fan and 32bit xr10 pro elite, some of the older models do come with external switch cos I have a few of them but this is definitely the xr10 pro v4 it's directly from Schumacher uk

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    So the XR10 pro v4 is the new lower priced one I have in the vid The xr10 pro g2s and elite g2s are the new 32bit ones You will also see stores discount the older xr10 pro and elite ones down to around the same price as the new xr10 pro v4 as they are basically the same thing hope this clears it up :)

  • @joshuaharris4780

    @joshuaharris4780

    10 ай бұрын

    This esc is called the xr10 legacy

  • @WTFRCCars

    @WTFRCCars

    10 ай бұрын

    @joshuaharris4780 not in UK www.racing-cars.com/new-products-1/june-2023/xerun-xr10-pro-v4-black-hw30112600

  • @antuandorelcassini4781
    @antuandorelcassini478111 ай бұрын

    🖖

  • @WTFRCCars

    @WTFRCCars

    11 ай бұрын

    👍

  • @coryjamesc
    @coryjamesc8 ай бұрын

    thats the Same unit except it doesnt have the Polarity protection.

  • @WTFRCCars

    @WTFRCCars

    8 ай бұрын

    Same as which one the new ones are 32bit ?

  • @endosrc
    @endosrc6 ай бұрын

    any US sellers?

  • @WTFRCCars

    @WTFRCCars

    6 ай бұрын

    I'm guessing all the main ones by now

  • @endosrc

    @endosrc

    6 ай бұрын

    @@WTFRCCars xr10 legacy is cheaper btw

  • @WTFRCCars

    @WTFRCCars

    6 ай бұрын

    That's is the name hobbywing north America has given this esc it's the exact same thing

  • @michaelfinchett4199
    @michaelfinchett41996 ай бұрын

    They are dodgy! Had 2 and had issues

  • @WTFRCCars

    @WTFRCCars

    6 ай бұрын

    I got lots of hobbywing esc's and all still working fine this one is in one of my touring cars and runs great not sure what issues you have had but almost all the drivers at the 3 local clubs near me run hobbywing esc's and I do t see issues with them?

  • @michaelfinchett4199

    @michaelfinchett4199

    6 ай бұрын

    @WTFRCCars I think there is an issue in the firmware or a faulty batch as alot of people have had same issue. Car loses drive. Turn off and on then works again.

  • @WTFRCCars

    @WTFRCCars

    6 ай бұрын

    Yeh definitely not had that but the 1st thing I do is check for firmware update and change the settings to what I like to run so maybe firmware issue? I've done many races with mine and no issue at all with it I'll check the firmware version when I get a chance.

  • @WTFRCCars

    @WTFRCCars

    6 ай бұрын

    So I have asked a few of the drivers and the original firmware you needed to select the 4wd profile and then they worked fine and didn't suffer the cut out fault

Келесі