Your dedication is astonishing for many of us. Well done work!

I just did this mod about an hour ago with your instructions and downloads on my E5 2673-V3 / Jingsha X99-E8I setup and my CPU-Z multicore benchmark jumped from 4439.1 to 4829.2 and the single core jumped from 302.6 to 347.1 :) Thank you for the info!

It only bloody worked! Thank you for the details and clear instructions.

Just love your videos(all the way from South Africa), so much insight on the X99 platform...

Hi Miyconst! Just wanted to let you know that I've had this work with 2 Machinist x99z v1.02 motherboards so far. Thank you for your hard work :) A tip for anyone using this board, you need to find an older version of AFUWin. I could absolutely not get it to work at all and would fail at the first block using the newest (5.13). Using an older version (5.11), I got it to work perfectly on the first try.

Just one word.. THANKS!

Thank you for this guide, worked perfectly!

Thanks for making this I have a Bundle coming in soon and this is extremely helpful.

At this rate you should be getting much more subscribers. Well done sir 👍

What a brilliant and comprehensive guide. If this had been out last year I would have kept my X99 and not bought Ryzen. Subscribed.

@Miyconst

4 жыл бұрын

You didn't miss much by switching to AMD Ryzen. Overall, AM4 is a much better platform.

@PedroHenriqueQuiteteBarreto

2 жыл бұрын

@@Miyconst It is, but is far more expensive

Thank You. Worked very well for me. I have e5 2678 V3 which is boosting now to 3.2GHz when before it was maxing out at 2.9GHz.

Very nice, it works flawlessly! You really deserve more subs mate. Keep the good work!

Thank you so much. Used this and the guide from tech yes city to do this with afudos on x99z v102. E5 2678 v3 full turbo with -70mv cpu -50mv ram working well. I will be trying on asrock fatality x99m killer 3.1 and will comment if it works.

Always watching your X99 videos even though I'm not using X99 platform. Maybe I should get one soon 😅

@Miyconst

4 жыл бұрын

You can always assemble an X99 computer with a Xeon E5 CPU and then sell it with zero or very little profit, just like a fun project to spend time with.

@Ko6pa

4 жыл бұрын

With a $100 2678v3 you definitely should consider ;)

@farawaythrower

3 жыл бұрын

@@Ko6pa Now that CPU goes for around 80 on ebay, it's great stuff lmao

@Ko6pa

3 жыл бұрын

@@farawaythrower is awesome for sure !

@user-wi8mc9ky7m

3 жыл бұрын

@@Miyconst Hey. Would you assist me? can you tell me how to do this procedure on my motherboard? I have e5 2680v3 and ASUS ROG STRIX X99 GAMING.

Great video as always Miyconst!

Hello Miyconst. Your reviews and videos are REALLY AWESOME! Thanks ! Great video.

amazing. can make a guide for Asus C612 dual CPU

Thank you for your tutorial! Can I ask a dumb question? Does this work with a MSI X99S Krait Edition and a Xeon E2660 V3? Thank you very much! :)

@Miyconst

4 жыл бұрын

It shall work, I have tested two MSI motherboards: MSI X99A SLI Plus & MSI X99A Raider, works with both.

@kakkoishonen

4 жыл бұрын

@@Miyconst thank you very much, mine is Sli edition too.

@mohsinlari3409

2 жыл бұрын

@@kakkoishonen How the board working for you, any issues? I’m kinda stuck on the same boat.

Fantastic! Rarely do I leave comments, but I need to say your tutorials stand out above and beyond anything I've viewed . They are clear, concise and yet extremely thorough.. And, in part due to your support, I have purchased the brand new dual cpu x99 Huananzhi motherboard which I intend to turbo unlock two e5-2678 v3 cpu's - wish me luck. Afterwards, I hope to follow the tutorial on The Passthrough Post to bring up macos Catalina on a Linux KVM-QEMU with direct pass-through to the GPU and a USB hub. Thanks again and please KEEP POSTING!

@Miyconst

4 жыл бұрын

Thank you for the support, Mark! As far as I know, there is only one (so far) dual socket LGA 2011-3 motherboard from Huananzhi, and this motherboard supports DDR3 memory only, thus, make sure to buy correct memory modules, and good luck with your build!

Thank you so much this! Thank you so much for all your care to brings us this amazing content! You are a super hero!!!!!

This is absolutely amazing. Do I have to do this on a newly installed Windows or I can do it on my current build with the old Turbo Unlock mod?

@Miyconst

4 жыл бұрын

You can do it on your currently installed Windows. I have validated with Windows 10 (previously Turbo Unlocked) and Ubuntu 18.04, also not a fresh installation.

@mashiroinoue

4 жыл бұрын

Miyconst that sounds perfect. Thank you very much! 🙏

@eternal89

4 жыл бұрын

@@Miyconst Hello. China mb x99 up bclk in bios or windows?

@Miyconst

4 жыл бұрын

@@eternal89 Chinese X99 motherboards do not have any options to control BCLK.

Keep up the hard work, my dude.

Did it in 10 minutes, worked perfectly for my X99 QD4. Thanks a lot!

@falexandrino

Жыл бұрын

Which undervolt -X/-Y do you use? Thanks

What an excelent video Miyconst, just did it without any problem. E5 2620 V3 now at 3.2 ghz!!! Thnx my friend and keep up with the good work!!! Greetings from Colombia!

Awesome guide! I was under the impression that this mod locked the processor at its max clock speed 100% of the time but since it doesn't, I'll probably end up doing this to the editing rig I'm building.

finally! thank you man, great video :)

@AleksandrsBrodie

4 жыл бұрын

:)

YOOO! IT WORKED! Thanks, Surprisingly simple and you explained it very thoroughly. 👍

@Miyconst

3 жыл бұрын

I am glad to hear that!

Hi mMiyconst, this worked well on my xeon 2620 v3 atermiter motherboard. its a very easy and straightforward guid, thanks alot.

Thanks for your video, I already completed the unlock to my Xeon E5 2620 v3, from 2,4GHz to 3,2GHz, It was very easy following your guide, thanks again!!!

@yossi2483

3 жыл бұрын

I'm with same e5 2620 v3 , x99 tf . Doesn't works for me. Error 103 on first cmd line : dump.bat

Excellent video. Helped me on my new HZ x99TF motherboard. I have used the ffs file standard voltage on my bios. I’m using ddr3 desktop memory at 1.5v. I have two 2gb 1333 Kingston HyperX sticks and two 8gb 1866 Kingston HyperX for the total of 20gb running at 1333 ghz, on E5 2678 v3 cpu. Thank you very much. Keep on the good work.

@edyartzi

3 жыл бұрын

I’m not sure if that’s the place for this comment: I’m using an RTX 2070 on this motherboard. The performance is excellent, But although it is recognized as pcie 3 (8gb) In Windows it is configured as pcie (2.5gb). I tested it in both of the x16 slots and in both of them it is the same.

I used the TechYes method on my E5 2678 V3 and my PC somehow reverted back to its slow clock speeds very quickly. You superior method seems to have permanently set the boost overclock, thank you!

@Miyconst

3 жыл бұрын

Now you know whose guides to follow 🤣.

Great explanation as always👍

You are awesome! I did it with my x99 D8 and it works! Thanks you!

@Miyconst

4 жыл бұрын

I am glad to hear that. Which CPU do you use?

@SunCat81

4 жыл бұрын

@@Miyconst E5-2640v3 and I used your X99-F8 BIOS.

@Miyconst

4 жыл бұрын

@@SunCat81 Thank you for the info. It's always nice to get a feedback that the guide actually works for others.

@olhodegatolives46

3 жыл бұрын

did you download the bios from the video or make yourself?

Cool, very cool man! thanks a lot for that!

Your the best! Thank you again

You've just made my day! Recently I have purchase x99 xeon combo with 16gb ram... for only $54 (too good to be true).. Keep up the good work!

Worked perfectly with Huananzhi X99-F8 and E5-2640 V3. Outperforms i7-5960X in single and multi thread. Thank you

@kennethearl9878

2 жыл бұрын

Wooh! I'm also getting a e5-2640 v3 soon.

Thanks for great videos!

I'm located Hong Kong, as the price on ram and parts etc, is much overpriced locally . i bought a x99-tf and e5-2678v3 from huananzi official store in china in early march 2021 for just 1450hkd (18x usd)and try it out with my 10 years old 1600 ddr3 rams, by following your instruction guide and playing in the save way, i dumped the rom and did the mod step by step, now running 3.3 all cores with -30 -20 mv. stable and cool performance proofed, very appreciate for your genius work and wish u a thriving future, thank you.

@Miyconst

3 жыл бұрын

Thanks for the support, good luck to you as well!

This video is pure gold! Thank you a lot, i've unlock the 2670 and 2696. You are the best

@petersongomes6127

Жыл бұрын

2696v3 The 3.8mhz?

@vyb8097

Жыл бұрын

@@petersongomes6127 yes 3.8ghz

Great as always. Hope you're well these days.

@Miyconst

4 жыл бұрын

Thanks Adam. I try to spend this lockdown to produce some more videos, but working remotely does not really give much extra free time.

@Adam130694

4 жыл бұрын

@@Miyconst I wonder if those 0 or 1 stepped (or V4s for that matter) CPUs can be pushed to max turbo on compatible boards, I know that many ASRock MotherBoards, have such feature (as my X99 Taichi, where you don't have to flash BIOS to force max turbo).

@Miyconst

4 жыл бұрын

@@Adam130694 I know that this hacked EFI / FFS drivers do not work with ES/QS chips, since those chips have different Turbo Boost algorithm, still, it might be possible to force max turbo frequency using the AsRock motherboards.

Oops, I posted a question with my work ID yesterday. Thanks for the answer. I changed the BIOS to the -20 mV and all my tests were faster, so that was worth the time. I was also able to overclock the RAM to 2000 from 1800. It's cheap 1333 DDR3 so that was another boost. I didn't notice any temperature increase even when rendering a file for 38 minutes. This PC is much faster than the Ryzen 5 1600AF I had been using.

Some great stuff here!

This is amazing and easy to use. thanks alot

X99-TF + E5-2676v3 = -70mV-50mV working fine (above that windows BSODs). Thanks for the tutorial!

@Miyconst

4 жыл бұрын

Thank you for the info, it helps me with collecting some statistics.

thank you, i do sucessfuly. My mainboard is atermiter X99 D3, and cpu e5 2678v3

Thank you for your awesome tutorial. 2620v3 on huananzhi x99-TF is now my main pc until 2678v3 arrives. the performance gain is superb. In forza horizon 4 1080p ultra, matches with my r5 1600 @3.95ghz using vega56 @64. edit: Gloway ddr4 Type β works on E5 2600v3 tested with nanya chips, dunno if micron chips works too. Sadly, powev does not work on x99-tf so no rgb fun with those memories.

Thanx bro! that wos wonderfull! it's realy works!

You are the best. Shame you havent more viewers

This is fantastic, thanks

great, you are a real IT guy!

Thank you for this guide, I've just done it and it worked perfectly. 👍 Huananzhi x99 F8 + Xeon e5 2666 v3 with 20/20 undervolt.

Thank you, it worked like a charm

@Miyconst

2 жыл бұрын

You are welcome!

Hey just wanted to say thank you. I used a E5 2660 V3 with a gigabyte GA-X99 Gaming G1 wifi and it worked for me as well.

@bambamkey1

3 жыл бұрын

Which drivers did yiu inject? I have the SOC Champion version of the board?

@bambamkey1

3 жыл бұрын

Damn! Can't flash modified bios. Invalid image.

@fondlethefork9261

3 жыл бұрын

@@bambamkey1 i just followed the video verbatim

This very useful information.

Great content. Support.

cool stuff, thanks!

I followed this tutorial and unlocked my 2620 v3 on a Atermiter zx-99ev3_1.31v. Turbo boost unlock transform a kitten into a tiger. It's impressive the amount of performance you can get from inexpensive processors.

The tool with the BIOS worked perfect on Jingsha X99M-H, outperforms Ryzen 3700X in multi

@moochiekk

3 жыл бұрын

with E5-2678 V3

Worked perfectly on Machinist X99Z v102

@rhonen1014

3 жыл бұрын

Thanks to your videos I was able to build a nice gaming computer for my friend for a very good price

@rhonen1014

3 жыл бұрын

It had to be flashed with an external programmer with the ATX 24-pin plugged in but otherwise everything was perfectly fine

Thanks for this video and the way to turboboost for Linux users ! Only thing I need to install Windows to get the bios files and do the MOD.. As usual, a complete and detailed video with all needed resource link ! Perfect work !!! Thank you. Ready to use Bios files are on the web site, into the presentation slide. Too bad for me no D8 bios... 8^)

@Miyconst

4 жыл бұрын

I am using Huananzhi X99-F8 BIOS with my Kllisre X99 D8. There is no compatibility issues, but the Huananzhi BIOS has memory timings section. That's why I didn't prepare unlocked BIOS for Kllisre X99 D8. Regarding Windows installation - you can always use a virtual machine, it's very easy.

@patrickregis1

4 жыл бұрын

@@Miyconst Just great, still awaiting my D8....

@augusto2581

4 жыл бұрын

​@@Miyconst Great Miyconst!! Thank you for the tip of VM! That is what I was looking for :D ! Awesome

One of the best at it .

@raputin

2 жыл бұрын

How long does asprogrammer take to flash the bios to bran new

Thank you for all your help so far! After a lot of testing and fiddling, I have come to the conclusion that my board is faulty. The BIOS that the motherboard came with states that Turbo Boost on All Cores is enabled. When running the stress test on CPU-Z I can see 100% utilization across all cores at the max turbo speed. However after about 10 seconds, the clock speed begins to decrease. My initial thought was thermal throttling. However everything is in open air on my test bench and the hetsinks on the VRM and CPU are cool to touch. Due to this I started fiddling with the BIOS using your Turbo Hack video. This landed up with the board POSTing everytime but not booting into windows each time. I tried various permutations of the BIOS modifications and someone's it would boot into windows and other times it wouldn't. I eventually bit the bullet and used your modded x99f8 bios. After the Flash, it booted up a lot quicker than the original bios but the Clock speed decrease was exactly the same as with the original bios. I then rebooted the machine and it did the same thing as only sometimes booting into Windows but POSTing everytime. After many reboots and waiting, I got back into Windows and flashed the backed up original bios back to be at square one. Very strange issue. I bought two of these boards for my two servers, so I am yet to test the second one before getting in touch with the seller regarding a return/refund/dispute etc. However regarding the clock speed decrease after a few seconds, they say that its normal and expected. From watching other videos on KZread, the Turbo Boost Clock speed stays consistent and dones't drop. If it really is thermal throttling after a few seconds, well eish... Thats a real bummer. I mean I was already planning on upgrading the VRM heatsinks before installing them into my 24/7 servers, but I had thought that the stock VRM coolers in open air on my test bench would've been fine.

@Miyconst

2 жыл бұрын

Hi there. I don't think your motherboards are defective. The things you are describing are known and expected. Regarding the booting issue, it's a UEFI bug, once you clear CMOS (or reflash BIOS) it doesn't properly detect the boot partition. There are a few potential fixes: 1. Install Windows in the Legacy mode and forget about this struggle. 2. Reinstall Windows in UEFI mode after you are done with BIOS modding. 3. Disconnect all storage devices from your system. Clear CMOS. Boot into BIOS. Restore defaults. Save changes. Reboot. Set desired BIOS settings. Save & reboot. Power off. Connect storage devices. It should work now.

@Miyconst

2 жыл бұрын

For the unstable CPU clock you need to understand how it works. Turbo Boost Unlock exploit forces all CPU cores to boost to the maximum turbo frequency UNTIL the TDP limit is reached. Once the TDP limit is reached, the CPU drops frequency to stay within the TDP limit. It is just how these CPUs work, and fixing the temps won't change anything. You have to reduce CPU voltage, so called undervolting, which means that the CPU consumes less power at the same frequency, and the consequences of this is that CPU can maintain higher clocks at the same TDP limit.

@jared4670

2 жыл бұрын

@@Miyconst Thank you so much. I now understand why the undervolting is involved for the bios mod.

@jared4670

2 жыл бұрын

@@Miyconst This explains why sometimes it would boot when I had a Flash stick isntalled. Couldn't understand this phenomeon! Thanks again!

@jared4670

2 жыл бұрын

@@Miyconst To be perfectly honest, all of these Ali sellers should pay you a royalty fee for every motherboard sold due to the amount of information and help you provide. Thanks a million! If I could like your videos and subscibe a million times, I would. Top notch!

hello miyconst...i search all over the web for my x99 turbo boost hack...and then i found your video..its easy to understand and my sytem is stable..nice work...i support you 100% i just subscribe you channel....thanks from malaysia

@Miyconst

2 жыл бұрын

Welcome to the channel!

@shukriideris5547

2 жыл бұрын

@@Miyconst thank you👍👍

@shukriideris5547

2 жыл бұрын

@@Miyconst hello....can u explain about undervolt ffs driver....im not understand

@Miyconst

2 жыл бұрын

@@shukriideris5547 Xeon E5 V3 CPUs have a TDP limitation, once this limit is reached CPU drops its clock frequency, with lower voltage CPU consumes less power, means it can maintain higher clocks.

@shukriideris5547

2 жыл бұрын

@@Miyconst ooooo thank you for the info...nice job and thank you

You should have more subscribers. 11/10 content

@Miyconst

4 жыл бұрын

Thanks man. My channel is still very young, hopefully, if I continue producing quality content there will be more views and subscribers.

@zoltm

4 жыл бұрын

@@Miyconst Indeed really like your channel and you bring to the world a lot of Russian cool tricks to the English speaking world. Because of you, I subscribed to some other Russian KZreadrs too. You guys have some cool stuff with the Chinese made products.

Thanks so much.. i click subscribe now !

Hey man! thanks for the video! Works perfect on windows. Doesn't seem to have an effect on hackintosh. Turbo works but speed is not locked. In case you were wondering.

I just did -50 -50 for 2678v3 and it works. If you have common problem with blinking mouse/keyboard 4 times and long booting time to windows, it means that you forgot or didn't want to restore default bios settings. Remove battery should work too. Just sacrifice yourself, make a photo of your RAM OC and do it again. Don't be lazy CI/CD guy like me :D

@Miyconst

2 жыл бұрын

Good point!

I can confirm this is working on my Huananzhi x99 bd4

Totally worked on my QIYIDA board X99H ED4 2670v3 on the first try. I limited the TDP a little bit to keep the heat down but amazing speeds for only 110 euro

Love it! totally works....Muahahahahahahah!

Thanks for another great video. ASRock X99 Extreme4 & Xeon E5-2697 v3 2.6GHz works like a charm with this mod and slight overclock by BCLK at 3.8GHz. Just as with previous method, for BIOS reading and flashing, use AFUDOS - FPT doesn't work with this motherboard. Though, with undervolting, behaviour of this CPU is quite weird. Without UV it work as intended with max multiplier (x36). Tried -20mV, -40mV or -60mV, and CPU on such setting reaches only x34 multiplier max, x35 or x36 is never seen even when using single-threaded application. Not big deal, but I would suggest to look into HWINFO or HWMonitor if CPU actually reaches desired frequency 😄

@Miyconst

2 жыл бұрын

How did you undervolt? Using BIOS settings or a different FFS driver? Undervolting on branded motherboards might lead to uncertain consequences, such as yours.

@Pentium320.

2 жыл бұрын

@@Miyconst FFS driver, as in BIOS there is no such option with this CPU (it was available, when I previously had i7-6800K, but with Xeon it disappears, same with RAM multiplier). I'll try to investigate why is this happening, because UV definitely works (lower Core Voltage from CPU-Z, lower temperatures), but issues with highest multiplier makes it not that profitable. Any ideas might be helpful ☺️

@Miyconst

2 жыл бұрын

@@Pentium320. I could suggest to try another Turbo-Boost Unlocking method - the S3TurboTool. It injects the driver into another BIOS region and it may not affect the clock multiplier the same way, but without a motherboard on hand it's very hard to guess what's going wrong in there.

@Pentium320.

2 жыл бұрын

@Miyconst I've actually resolved the problem. Hard to say why was it an issue, but simple restoring UEFI defaults after flashing modded BIOS solved the problem - no idea why I haven't tried this before. Flashed BIOS with -60mV, and it was doing good with stress tests from Prime95 or OCCT, but after 2 days Windows randomly crashed with 0x124 BSOD, which as I think is CPU instability. -50mV works as intended, at least I hope so 😄 Funny thing is, that undervolting in my case didn't really help with temperatures, though CPU itself gained some performance (4807pts vs 5198pts in Cinebench R20) despite it's not overheating. Maybe another power limit or something, hard to say. Anyway, still, profit 😄

@mohsinlari3409

2 жыл бұрын

@@Pentium320. I have an E5- 2696 V3 and Asrock X99 Taichi Motherboard do you think I can do this on my build? I am new to this.

Raising the BCLK makes sense if the TDP limit is not reached, like in games or general computing.

Guide for all operating systems *immediately shows every single step in windows only* GG

@Miyconst

2 жыл бұрын

Feel free to blame American Megatredns and Microsoft for not providing tools to work with the BIOS under Linux.

@littleleelee2706

2 жыл бұрын

@@Miyconst Yea, I get it but that just really sucks. I saw the title of the video and the little Tux you stuck in the corner of your thumb nail and got really pumped only to have the wind taken right out of my sails. I plan to give it a try, but will have to dig through storage this weekend (the shed, not disk storage) and track down a copy of Windows. Hopefully this guide will work with my mobo model. Do you happen to keep a list of tested/reported compatible motherboards?

@Miyconst

2 жыл бұрын

@@littleleelee2706 you can obtain a copy of Windows for free from the official Microsoft website, all you need is an empty media drive to create a Windows installer. I don't specifically keep track of compatible motherboards, because so far I have not met a single one, which would not work. BIOS modding method might be different, but turbo boost unlock works.

@littleleelee2706

2 жыл бұрын

@@Miyconst I've had a chance to install windows on another drive and run through your steps. All cores are boosting to 3.5ghz on my 2690 v3 like they should. I can confirm this is working on the Huananzhi x99-bd4 under Pop!_OS. The only thing I wish I had more info on is what the numbers mean on the different Payne drivers. I got anecdotally from your video that it has to do with undervolting but have no idea what the numbers being in pairs means. I picked 20_20 but is that +/- 20 or -20 vcore and -20 somewhere else like vtt or vio... I just don't have any information here.

@Miyconst

2 жыл бұрын

@@littleleelee2706 these numbers are voltage reduction in mv for Core & IMC (cache). Basically lower voltage lets CPU hold higher frequency at the same TDP, but also stresses VRM more.

Thanks you i unlock Xeon E5-E2620 V3 to 3.2Ghz all cores on Alzenit X99Z I just had to back up the bios and also modified bios to write under Ms-Dos through Afudos through Windows it was not possible to do a Backup or write a new bios

Thank you for this great video. I just need to clarify if the overclocking you are doing here is only for engineering sample or for all e5 2600 V3?

@Miyconst

4 жыл бұрын

It is only NOT for engineering samples. It works with all retail (final) Xeon E5-2600 V3 & E5-4600 V3.

thx maan

Gracias!!!!

@user42362

3 жыл бұрын

Coméntame que pasos seguiste?

Perfect. Just the answer I was looking for. Since I'll be booting UNRAID as a base operating system, I needed something like this. It seems like the UEFI Windows method is infinitely more complex than this. I wonder why it seems to be preferable? This method to me, just makes sense. Can we modify the iEngineer BIOS'es like the OEM ones? It seems like they took the stock BIOS and cleaned it up a lot, but I can't see any documentation exploring if they enabled the ability for All-Core Unlock like this, out of the box. Are you planning on doing a video of aftermarket BIOS'es for these boards in the future? I think that kind of exploration would make for good content on your channel. Thank you again, as always for these uploads. Please keep making content!

@Miyconst

3 жыл бұрын

You can modify iEngineer BIOS the same way as any other BIOS. I am staying in touch with iEngineer and he told me that his BIOS was developed from scratch and not based on the Chinese version. Also, his BIOS is deeply integrated with the hardware used on the motherboard, which gives better functionality, but brings issues when Chinese use similar, but not the same components. If you plan to try his BIOS - make sure to have a CH341A lying around.

@bergePanzer581

3 жыл бұрын

@@Miyconst oh wow, I didn't expect a reply! I've never used one of those in the 20+ years I've been into PC's. How difficult are they to use? Do you think it might be worth the extra effort to do all that vs modifying the Chinese BIOS? for my needs I'm not so certain, since I think I might only need the All-Core Turbo unlock. Stability will be super important, as it's my NAS first and my gaming rig second.

@Miyconst

3 жыл бұрын

It's not difficult at all, but I would still not bother about it. Here you will find basic usage guide for CH341A: www.miyconst.com/Blog/View/2086/ch341a-minimal-usage-guide-how-to-read-and-write-a-motherboard-bios

thanks.

Hi, great video as always :) I was wondering if that can be done with a dual motherboard like the X99-F8D ? Does it requires specific instructions additional to the video ? Thanks!

@Miyconst

2 жыл бұрын

Hi Tod. For dual socket motherboards you need to follow a slightly different guide. Search online for S3TurboTool tool, so far it's the only working for dual socket motherboards I know.

Do I have to re-do this method if I perform a reformat on my SSD/Hard Drive? Or is it permanently done in my bios unless I revert it back to normal bios? Thanks man! I'm a big fan!

I wonder if I have to go through these steps to turbo boost my xeon e5 2678 v3 if I decide to use a mainstream x99 motherboard like the ASUS Sabertooth x99 (which I can find quite cheap second hand). Anyway, Great tutorial as always!!! :)

@Miyconst

4 жыл бұрын

First of all check if your motherboard BIOS can force your Xeon to turbo on all cores with stock BIOS. Some branded motherboards have such feature. Just enter CPU clock multiplier which equals to the maximum turbo speed, and the motherboard does the job automatically. If that does not work - you can follow these steps, but I would recommend to use official Asus utility to read/write BIOS.

Nice if you keep this up u can teach people how to get not scammed by scalpers selling ryzen for huge price And get something comprable to it

6:20 - "find the desired ffs file and inject it" >doesn't show how to do that step Very nice guide :)

@Miyconst

3 жыл бұрын

The video has almost 40k views, and so far everyone was able to watch the video without skipping fragments. 05:00 - 06:20 I tell how exactly you inject a driver.

Hi, thanks so much for all you do sharing your work like this. I'm working on a Machinist x99 w/ locked bios, FPT failed to backup existing bios. You mentioned using afuwin to flash the bios; will afuwin flash your Machinist x99 -20mv lazy .rom file? If afuwin is not successful I would need to do method 2 on your website using USB correct?

@Deemo13_

3 жыл бұрын

If you are using the Machinist X99Z, then you can use AFUWin to flash the BIOS.

Great video, indeed, and you're doing an excellent job as usual. My question, do you think I should try it on a dual CPU mobo, ASUS Z10PE-D16 WS? Or it may brick the mobo? I hope you will find a time to answer this, thank you.

@Miyconst

4 жыл бұрын

You can definitely try, but so far, all reports I am getting from my subscribers, is that injecting FFS driver does not properly work with dual socket motherboards, manual EFI driver installation works well.

@georgebadiu

4 жыл бұрын

@@Miyconst Ok, thank you very much. When I'll find the time, I will try it and then let you know about the result.

@xcimo1

3 жыл бұрын

I have the same motherboard, I would be interested if you got it working one way or another. thanks!

@georgebadiu

3 жыл бұрын

@@xcimo1 Didn't find the time (and courage) to do it... yet.

Really worked man, was easy. The only CONS is that in some moment of the video, just after opening UEFI Tool , your X99.rom and insert after, I wasn't sure if I had to save on the own X99.rom or in the BIOS Preloaded . I understood that had to save on X99.rom. For me , worked as a charm, E5-2620V3 and Atermiter X99 Motherboard. Actually I bought it because I saw this video and wanted to try it! Thanks again! PS: I Don't know why in the CPU-Z I get only 2,4ghz speed, while in Task Manager see the 3.2Ghz. Do you know that can it be?.

@Miyconst

3 жыл бұрын

CPU-Z as well as the task manager are not the most accurate apps. Try to use HWiNFO.

Built my X99 build with a e5 2640v3 and used the turbo boost unlock and I have to say I’m very impressed with how it’s performing, although I had to install fans into my case to keep up with the heat lol, this build wouldn’t have been possible without your indirect help, thank you so much, one question though, let’s say I upgrade to a 2678v3 or another CPU, Will the turbo unlock still work with those chips or do I have to do everything over again??

@Miyconst

2 жыл бұрын

Thank Anthony. If you have unlocked turbo boost with a permanent BIOS mod, it will stay until you flash another BIOS. If you used a system level EFI driver it gets lost with each BIOS reset.

@masternana9591

2 жыл бұрын

I managed to bypass the protection on my motherboard hp z640, I can delete it and make a backup, but I can't change it so that it doesn't work

i tried a first turbo boost from another tuto, and tested it, then later, i made this turbo boost and compared to the first one i gained more points on cinebench R23 here are the scores with original bios, first turbo boost and then this one ! multicore score: stock original bios :9075 first turbo boost :9691 miyconst turbo boost :9756 single core score: stock original bios :745 first turbo boost :733 miyconst turbo boost :746

@Miyconst

3 жыл бұрын

You might be able to achieve even higher results if you reduce the CPU voltage even further, but thanks for the info!

I have a Huananzhi X99-F8 motherboard and an Xeon E5-2680V3, it went up to 3.2GHz.

I've been watching your videos as I've decided to use a dual X99 motherboard as my next pc build. I've been looking at the Kllisre X99 dual CPU board but don't think you've reviewed that one yet, do you think it would be ok? I'm looking to run dual E5-2660 V3's. Very nice channel by the way, best I've seen in a long time.

@Miyconst

4 жыл бұрын

I have already ordered this motherboard, but unfortunately, the package has stuck somewhere. There is another review of this motherboard, in Russian, main things: it has only two memory channels per CPU, Turbo Boost Unlock with injected FFS driver into the BIOS does not work, all the other functions seem to work well. In any case, before I test the motherboard myself, I can't recommend or not recommend it.

@thomassmith4999

4 жыл бұрын

@@Miyconst Ok thank you, to be on the safe side I will buy the CPUs and other parts first. I can spend the extra and buy the JINGSHA board if I have to :). My current machines are a Dell T5500 and T7500, I've been fan of dual cpus ever since I built a dual Celeron 300A slot one at 450mhz in 1998?. I'll keep watching.

@mohsinlari3409

2 жыл бұрын

Any follow up? I’m also looking if I’ll be able to implement this Turbo Boost Unlock on my Jingyue X99 mobo with dual E5-2666 V3. Thanks

I got the Xeon e5-2620v3 and turbo unlocked it on an MSI X99A SLI Plus with M-flash and the tools you provided. It works. But seeing the 50 degrees temp on my CPU and extremely good VRMs (SFCs), I was wondering if the turbo multiplier could be unlocked. Please research a bit about this brother. Thanks again for the way to permanently hack the turbo, love your content

@Miyconst

4 жыл бұрын

It is not possible to increase the CPU clock multiplier on the Xeon E5-2600 series. Only some Xeon E5-1600 CPUs have unlocked multiplier, these can be overclocked.

@zubaeralam9202

4 жыл бұрын

Yeah, I know that. But it was not possible to unlock max turbo multiplier for all cores on e5 v3 CPUs before. Nothing is impossible

@Miyconst

4 жыл бұрын

@@zubaeralam9202 Unfortunately, this is a hardware limitation, it's physically soldered into the CPU and it's not possible to overcome this limitation, at least there is no known way for any of the E5-2600 CPUs or other locked Intel chips.

thanks... you are the master, this is my first experience to do unlock my Intel Xeon 2620 V3. And i have a question, this unlocked can be use for another procesor.... i mean. the same board but different procesor??obviously Xeon 26XX V3 ? thanks

@Miyconst

3 жыл бұрын

Yes. This method persists in BIOS even if you change your CPU, just make sure that the new CPU is compatible with the turbo boost unlock.

@noobrobert9423

3 жыл бұрын

@@Miyconst i found ram ddr3 1866 is very cheaper than ddr4 2113. But I dont know whether xeon 2620v3 compatible with ram ecc ddr3 1866 on mainboard support ram ddr3 or not? Please advise me..

@Miyconst

3 жыл бұрын

@@noobrobert9423 E5-2620 V3 does not support DDR3 memory, you need DDR4 for this CPU.

Hey Myconst, first of all thanks for the Guide and all the work you put into testing this for different boards and systems. I have a question about this method doe. Do you think it is safe to flash the bios, while the driver from the old method is still installed?

@Miyconst

4 жыл бұрын

Yes, it is safe. Once you restore BIOS default settings, the previously installed EFI driver won't be loaded any more.

@h4X0r99221

4 жыл бұрын

@@Miyconst Neat! Thanks for the quick answer.

@h4X0r99221

4 жыл бұрын

@@Miyconst Just flashed the bios successfully, I am getting 3.18GHz all cores on a 2678 v3. Would you consider this numbers as in range of silicon lottery? Usually it should boost to 3.3 right?

@Miyconst

4 жыл бұрын

@@h4X0r99221 It depends on how good your CPU is, how many and which memory you use. You can try to reduce the CPU voltage further and see if that helps to reach the 3.3 GHz limit, but many E5-2678 V3 stop at 3.2 GHz with full load.

@h4X0r99221

4 жыл бұрын

@@Miyconst Oh okay, good to know. I am using quad channel DDR4 2400MHz 8GB sticks and and running the non undervolted ffs, because I can't afford system crashes. I guess if it was only for gaming, I would push it with the 20mV undervolt. :)

Thanks for the great work!! I'm confused I don't find the Download links for the already made Bioses 😬

@Miyconst

4 жыл бұрын

It's on the last page of the Google Slides presentation.

@zzmadd

4 жыл бұрын

@@Miyconst Found! Thanks a lot! As soon as I get the board and CPU I let you know how it goes in MacOS with the Turbo Unclock.

Hello, thanks for the guide, it's incredible :D I juste have a question, if i would change my e5 2620 v3 for i7 5820k, i need remove turbo unlock ? How can i disable it, reset bios settings is enough or i need to reinstall windows too or something else ? Thanks you more, i really love ur works and your channel ! Have a nice day :D

@Miyconst

3 жыл бұрын

For i7-5820k you have to flash the original BIOS with no modifications.

@rodvic8108

3 жыл бұрын

@@Miyconst Thanks you for your quick reply, i will try it when i will receive the 5820k. Have a nice day ! :D

Awesome work! whats the undervoltage going to give me? less power draw for similar performance?

@Miyconst

4 жыл бұрын

CPU Power Consumption limit is not removed with Turbo Boost unlock, thus, if CPU consumes more power than "allowed" it reduces its clock frequency to consume less power. Reducing CPU voltage also reduces CPU power consumption, which lets CPU stay at a higher clock frequency for longer.

@koolkiwikat

4 жыл бұрын

@@Miyconst thanks bro for your work!

@daemonkisure2952

3 жыл бұрын

@@Miyconst can I undervolt more the cpu? With the x99 bios undervolted file?

it works, How can I increase the speed of my BCLK? I have a xeon e5 2660 v3. Thank you very much for your videos

@Miyconst

4 жыл бұрын

Unfortunately, BCLK overclocking is only possible on branded X99 motherboards. So far not a single Chinese motherboard supports BCLK adjustment.

Also got this done a few hours later when i got off my arse now i just have to oc to 4 gigs :D

@Miyconst

4 жыл бұрын

What CPU do you use?

@nolo1337

4 жыл бұрын

@@Miyconst e5-2630

@Miyconst

4 жыл бұрын

@@nolo1337 E5-2630 or E5-2630 V3?

@nolo1337

4 жыл бұрын

@@Miyconst v3

@Miyconst

4 жыл бұрын

@@nolo1337 Then there is no way you can overclock it to 4 GHz, the maximum turbo frequency of this CPU is 3.2 GHz.