Congratulations on your new Quest 2, it's really an excellent headset.. I really enjoyed your video, take care.

@RavenSimulations

2 жыл бұрын

thanks! take care

Try a few upgrades from VR Cover to get a few added comfort settings on the Quest. Thanks for the video.

Thanks for the video, I like your commentary

Very informative. Well done. Best, Rod Machado

@RavenSimulations

Жыл бұрын

Thanks for watching!

If you are flying a commercial jet then about 80-90% of the time you are looking at your instruments and not so much outside. Especially IFR conditions.

Thanks for the video. I'm new to VR, and even though I only see with one eye, I'm enjoying the benefit of not having to use a hat switch to look around, anymore. Being able to lean into the controls is a huge plus, for me. It lets me get close enough to read instrument, in a natural feeling manner. Now, I just have to wait about half a decade, to afford proper VR rig. I'm still rockin' a GTX970, on a FX8350. Definitely needs side-grading to an arcade cabinet, to make room for the proper rig. At the moment, it seems only FS2020 will let me go into VR, but with very low quality graphics. X-Plane's not having any of it. It'll start to show the enable VR hardware button, and when I go to turn on the headset, it takes it away. LOL Thanks for sharing.

@RavenSimulations

2 жыл бұрын

Thanks for watching! more to come!

@travelwilder

4 ай бұрын

Thank you for commenting. Even me, I can only see with one eye. Does it still give you good experience?

@ThomasGrillo

4 ай бұрын

@@travelwilder I'm monocularly sighted, but yeah. I still find the headset enjoyable. I see in it, the same as I do in real life. Since I naturally have a restricted field of view, the headset mimics that, too. I just wish devs would take sight impaired players into consideration. I've had to throw back several apps which had HUD displays in one eye, usually my blind eye, and other information in the other, and usually, the fonts are too small for me to see, even with fonts turned all the way up. LOL

@travelwilder

4 ай бұрын

Thank you, we both are in the exact same boat. i lost my left yee cpl of years back in a sports injury. Trying to get back in life again. @@ThomasGrillo

@ThomasGrillo

4 ай бұрын

@@travelwilder Sorry to hear that. Mine's from congenital bilateral coloboma (retinas don't exist in parts of the eyes), and reduced acuity.

Very nice video 👍🏻 Actually I've stopped using my Quest 2 with XP 12 due to the blurry display on the headset (while perfect on the pc, with a 4070 gpu): which software have you installed on your pc for the Oculus? I've found only the one for Oculus Quest Rift and I cannot change anything in the headset, nei there the resolution nor the refresh rate. Thanks in advance

hi, beautiful video, I would like to ask for one detail, I intend to buy this VR, how much can the resolution of this VR be lowered to a minimum?? because I have a 1080TI video card and I7 cpu, thanks, greetings from Italy

You might think of starting with the setup? Not much use jumping right into the aircraft if nobody knows how to set up the headset first...?

Hi from Canada .. great video !! Just a question, what OS are you using? I'm hoping to set up a decent VR flight experience using Linux .. any pointers? Cheers :)

What app do you open in game? Does it have a scratch pad to upload preflight check lists?

does it work with the onboard hand tracking?

Wow this looks amazing.

What kind of machine are you running?

Can you tell me how to be able to fly in VR? All I do is just connect my oculus to my computer. Do I need to do anything more? Thanks!

If you click on the yoke with the Quest controller, can you fly with it?

Is this running on a computer? Which one and would it work in the mac?

Is the video what you see on the headset or on the pc monitor?

Sorry if this is a dumb question but I’m completely new to VR, why would the check box in xplane11 be greyed out when I have my OC2 setup and working fine with other stuff? It’s frustrating because I bought the OC2 solely for VR flight training. Any help would be greatly appreciated.

@RavenSimulations

Жыл бұрын

If you are on a mac it will not work, unless your running windows on your mac

Hi, what sky plugin do you use? Looks great

@RavenSimulations

Жыл бұрын

no plugins for the sky

Nice but too much quick head movements. You could slow down a bit.

Have you tried the wired link to compare performance? from the video, your display looks pretty smooth. Im using wired link with zibo 737, 1080ti, its not as smooth as yours.

@RavenSimulations

2 жыл бұрын

again more testing needed, but I did a flight yesterday on the link cable and didn't notice a difference. thanks for watching

@NoName-tg5pp

2 жыл бұрын

I get a white translucent bar at the bottom after a while with a cable. Tried different ones. On the oculus forum there are more people complaining about it. Apparently begun after V24. Airlink does not have that issue. I have a 2070S

@RavenSimulations

2 жыл бұрын

@@NoName-tg5pp I'll keep my eye out for it... I did a 45 min flight on Sunday and recorded it... didn't see any translucent bar at bottom. I'd post it but its not that great. Planning on a live stream this week though. Are you using the oculus branded cable?

I decided to grab an OC2 a couple weeks ago. Finally had a chance to try X-Plane 11 in VR. Looks like I have a bunch of tweaking to get things smooth. I haven't tried setting mine to 120 Hz yet, but I will now that I've watched this video. I have a Ryzen 5800X with 64GB of DDR4-3600 RAM and an RTX 2070 Super, but I'm getting some frame time dips which is frustrating and really messes with the eyes. Just curious if you or anyone really, has some suggestions to get the best visuals to FPS from XP11. Has anyone heard if there Is a way to run AMD FSR in VR? That would probably help quite a bit. Thx and take care!

@RavenSimulations

2 жыл бұрын

I also use VMI-Twick plugin which you can go to ravensimulations.com -> my settings and there's a link to download it there as well as the settings i use which could help. I don't have a lot of experience with AMD vid cards though....

@Viking8888

2 жыл бұрын

@@RavenSimulations I wasn't able to get to your site last night, but I was able to today and noticed you have an RTX 2070. I have an EVGA RTX 2070 Super, so it looks like I can just apply your settings to my x-plane to get some smooth sim play. thanks for sharing.

@RavenSimulations

2 жыл бұрын

@@Viking8888 ya my host provider was having issues last night. ya I have a 2070 rtx first gen evga.. not super or ti... so those settings should be a good start! thanks for watching!

whats ur pc specs, mine didnt run, it crashes everytime

What is the airplane?

Are you using rudders hardware or is it controlled with oculus somehow?

@RavenSimulations

Жыл бұрын

rudder pedals and a honeycomb yoke

@anotherOneMore7

Жыл бұрын

@Raven Simulations got it thanks. I didn't notice it sitting in front of you. I thought you were using the oculus controllers for all flight control. Seems like could be tricky using both yoke and hand controllers. Is it?

Your GPU, please?

What graphics card are you using ?

@RavenSimulations

2 жыл бұрын

I'm using a 2070.... there's a link in the description of all the parts in my pc. Thanks for watching!

Which model plane are you flying in this video ?

@RavenSimulations

2 жыл бұрын

The Vflyteair 140 Modern - store.x-plane.org/vFlyteAir-Cherokee-140-Modern_p_1032.html

Where did you get the KRYW scenery?

@RavenSimulations

Жыл бұрын

I think i just edited it a little bit myself

How where you able to play x plane 11 on Oculus quest 2, i haven't been able to set it up

@RavenSimulations

Жыл бұрын

Installed the desktop occulus quest 2 software. And then clicked the VR button in the options in x-plane 11

what plane are you flying in?

@RavenSimulations

2 жыл бұрын

Vflyteair Cherokee pa28 140 modern

@patwhite2740

2 жыл бұрын

how are you using Occulus controller? I only get the green laser light which is annoying..and becomes tedious to slect all the cockpit controls. great series btw. thx

@RavenSimulations

2 жыл бұрын

@@patwhite2740 I just reach for the actual buttons or controls... it has the laser, but you can just push it up to what you want to manipulate. It'll vibrate a little when you are in range to manipulate it.

vous parler anglais mais comment mètre x plane sur quest 2 merci

Does anyone know if Oculus Quest 2 can be used with X-Plane 11 running on a Mac?

@RavenSimulations

2 жыл бұрын

I don't believe mac has vr support... but don't quote me on that.

@andreiveldman2000

2 жыл бұрын

@@RavenSimulations Thanks for your reply. I'm using X-Plane 11 on my Mac mini computer and I like the combination a lot for practicing instrument flights before going for the real flight in an actual airplane, and your video shows that using Oculus could have been awesome. It's a pity it's not supported.