X-FLY TWINLINER TWIN 40MM MAIDEN! by FGFRC
Тәжірибелік нұсқаулар және стиль
I was blown away at the scale detail of this little guy. And as good as it looks it flies just as well!
I am not an affiliate with Banana Hobby but here is a purchase link for your convenience: www.bananahobby.com/4-ch-xfly...
About the plane:
Wingspan 1010mm (39.8 in)
Length 990mm (39 in)
Wing Load 75g/dm2
Wing Area 10dm2
Flying Weight Approx 750g (1.6 lb)
CG (Center of Gravity) 93mm from the leading edge
Drive System Two 1413-KV5000 inrunner brushless motors
EDF Diameter Two 40mm (12-blade impeller) Galaxy X-4
Landing Gears Fixed main landing gears, steerable nose gear
Servo Two 9g & Two 4.3g
ESC Two 20A
Approx Flight Time Up to 10 mins
Assembly Time Approx 15 mins
Recommended Battery 14.8V 1300mAh~2600mAh ≥35C Li-Po
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!
Пікірлер: 41
Awesome little rc airliner that flies as well as it looks!
Very cool little airliner! We have one on the way, looking forward to it!
@FatGuyFliesRC
17 күн бұрын
Well I finally read the instructions and they clear call for the elevators to be trimmed down not at level otherwise she will climb to much.. and she did , fixed it and now she flies level.
That’s one smooth flying and responsive plane!I like how it taxi’s on the runway, real smoothly!
@FatGuyFliesRC
17 күн бұрын
Great flyer for sure!!!
I'd move the battery forward quit a bit. Looks tail heavy. Cool looking plane. 👍
@FatGuyFliesRC
17 күн бұрын
Well I finally read the instructions and they clear call for the elevators to be trimmed down not at level otherwise she will climb to much.. and she did , fixed it and now she flies level.
That clubs always quiet like it's your own field! Love the airliner.. don't think there's another small airliner out there of this smaller size. Is she a keeper?
@FatGuyFliesRC
18 күн бұрын
Well I go very early or in the late afternoon when there is hardly anyone ever there. Yes I really am loving this little EDF and yes a real keeper!
Good video!
@FatGuyFliesRC
17 күн бұрын
Glad you enjoyed it Well I had it set up wrong the elevators are supposed to be angled down a bit. I fixed it and it flies greet now.
hey,Bud!I hope you can show handcam on the remote while the plane❤
@FatGuyFliesRC
17 күн бұрын
Do you mean a fpv view?
@faizturtle1331
16 күн бұрын
@@FatGuyFliesRC yeah
Nice flight! Good to see you back.
@FatGuyFliesRC
18 күн бұрын
More to come! So glad to be back too!!!!!!
We had one of the first pre-production units in the US and I thought it flew pretty good. The CG was a little off on the maiden, but we adjusted it and it flew very good. We also tried for the first time, the new FMS Reflex V3 Flight control Gyro Stabilizer and it worked very well. RC airliners are my personal favorite and I am so glad these are being made at a budget price. I would love to see flaps and retracts on this plane tho, hopefully for a version 2.. @Mikeylikesit1968 was our test pilot ✈
@FatGuyFliesRC
3 күн бұрын
Thanks for sharing and a full house one would be awesome.
Hopefully get mine in couple days from shop here in uk been waiting nearly 2 months lol I probably could of got it faster with other stores but like to support sm business’s great flying fg
@FatGuyFliesRC
17 күн бұрын
Make sure you read the manual, it clearly calls for the elevators to be trimmed down mechanically not what would seem level at eyeballing it.
Looks like you're the lone Club member out there.
@FatGuyFliesRC
18 күн бұрын
Well I go very early or in the late afternoon when there is hardly anyone ever there.
I'll be trying 3s from the start. All of the videos on youtube are on 4s but 3s should be plenty and a lot lighter. 1300 120c 3s will reduce AUW by way over 100g compared to a 2600 4s, which is a lot on a small model. Should still see over 3 minutes flight and the ESC's won't get so hot. Nice video and good maiden btw !
@Mikeylikesit1968
17 күн бұрын
Ya but it needs the nose weight, flying a small 3s going to be tail heavy
@FatGuyFliesRC
17 күн бұрын
Going to try her on a 3s soon. Thanks
@catherinewright8933
17 күн бұрын
@@Mikeylikesit1968 I'm sure there will be room forward of the battery compartment. The front end won't be solid foam ! The 2600 4s is a big brick in a small plane like this.
Very nice hope you are having a great day
@FatGuyFliesRC
17 күн бұрын
Thanks! You too!
A320
@FatGuyFliesRC
15 күн бұрын
But who makes the A320?
@catherinewright8933
13 күн бұрын
@@FatGuyFliesRC Airbus
I flew a production version before they were sold in stores. Didnt care much all it flew. Just dont like fixed gear
@FatGuyFliesRC
17 күн бұрын
Well I finally read the instructions and they clear call for the elevators to be trimmed down not at level otherwise she will climb to much.. and she did , fixed it and now she flies level.
every one of your videos your jacking with your trim.... Check your CQ. maybe add a tire weight or so and zero out your radio and trims and all mechanical rods, etc.
@awphill
Күн бұрын
every video is the same. Aircraft is extremely tail heavy and then you say, " she needs a lot of up elevator" and then the trim is screaming. Just doesn't make sense.
@FatGuyFliesRC
Күн бұрын
yeah like I said in the video, since you obviously did not listen to what I said. I did not do the research ahead of time or even look at the manual. It clearly shows that you must set the elevators down to just below a mark on the fuse . Mine were what looks like even but much higher than that mark making this plane fly tail heavy. i was wrong in this video in many ways but i show ALL, my good and bad as is the norm for my channel. if make a mistake we ALL learn from it in my next video it is better and in the next to soon be released even better. Please be patient and thanks for watching.
@awphill
Күн бұрын
@@FatGuyFliesRC True I do just click to the take-off and landing on most RC plane videos. I'm not trying to be rude, just not good with sentence structure, I guess. I'm Just saying something was off and hoping to help if you didn't notice. As long as were all having fun with RC flight then .... keep on flying. Still a cool channel.
@FatGuyFliesRC
23 сағат бұрын
@@awphill Well said yes, I am actually ashamed of this video since I did not do the research but as I said I show the good and the bad. Thanks I hope I did not seem rude earlier. Have a great day!
Thx for the Video. I am sure that this Model will not survive very long at any Pilot who purchased it. It is to heavy and therefore much to fast.
@FatGuyFliesRC
17 күн бұрын
Well I had it set up wrong the elevators are supposed to be angled down a bit. I fixed it and it flies greet now.
@catherinewright8933
17 күн бұрын
Lighter 3s lipo could see weight down by over 100g which will allow slower flying. Set up to get the cg spot on and control surfaces just right and it will fly fine.