Mine did the same thing when I first got it but it still run flawlessly but after the first day taking it to the range about 400 rounds the issue is gone I’m assuming the tolerances is just a little to tight they actually feel tighter than my 320x 5 go figure!

BTW, before doing anything when opening the case I took it apart, including removing FCU and cleaned, dried and then liberally lubed it. I swapped out the FCU's between my standard P365 and the XL and the interference issue was 95% gone. Makes me think maybe the FCU sits too high in the XL frame and has proper clearance in the other frame.???

@devildog_iii3492

2 жыл бұрын

That’s interesting.. gonna see if anyone has an XL left to try that

Could be that manual activation has something to do with the second striker safety. Ask sig about it.

I swapped out the FCU from my XL to my standard frame and the issue was almost not noticable. I put back in XL frame and after about 2K rackings of the slide over a couple of evenings the problem is barely noticeable. Not bad enough to complain about anyway. As stated previously, I'd field stripped including removing FCU and cleaned thoroughly and lubed w/ a high quality lubricant before doing anything. As for trigger, I dry fired approximately 3K times and it is getting close to acceptable for carry.

Just got mine a week ago and first thing I did in the store was dry fire and trigger reset. It wasn’t as stuck as yours but ran flawlessly til this point got 200 rounds so far

@devildog_iii3492

4 жыл бұрын

When it came to my house I did trigger and reset but decided to take a chance. No longer have mine thou, didn’t run right and sig gave me the run around so I’m done w sig.

Picked mine up a few days ago. I noticed there was a little resistance racking the slide during dry fire but not stuck. Cleaned and lubed the hell out of it. Took it to the range yesterday first 100 rounds not one malfunction.

@devildog_iii3492

4 жыл бұрын

Nice, more people have been saying that. Hope they figured it out

@peteross4879

4 жыл бұрын

I picked mine up 2 days ago and the slide was not stiff at all. Maybe I got lucky. It shouldn’t be that way, for a big brand company you shouldn’t have any issues.

@devildog_iii3492

4 жыл бұрын

Good to hear u got a normal one

I’ve never seen a handgun do that before. Is there any movement in the slide when you pull the trigger?

@devildog_iii3492

5 жыл бұрын

No, not like on the P320s

I just got back from first 100 rounds..zqi 123g..had issues returning to battery and barked fire like mad also had 1 hard primer strike but no discharge during a failure to return to battery. Perfecta 115 had one 1 issue with return to battery. Otherwise 115 worked great. Accuracy however was all over the board as if my sights are off. The trigger/rack slide issue is nothing more than a break in problem. Yes shouldn't be like that but it gets better with feeding it, just 100 rounds I just tested it almost has went away. Let me know if you've had battery return issues or feel like your sights are off.

Interested to see how the range session goes if you shoot it.

@devildog_iii3492

5 жыл бұрын

I’ll bring it out Tuesday and post. Does urs do that? How’s it going w it?

You sort this? I bought one the other day and it is a tiny bit stiffer to pull back to test reset but hardly a struggle. I have heard other people have issues with it as well and I wonder what the deal is.

@devildog_iii3492

3 жыл бұрын

I didn’t find a fix. Sold it

It’s been a couple of weeks since you posted this video; have you shot it yet? Any issues with it if you did? There are other videos on KZread with people experiencing the same thing but they don’t seem to have any issues when it comes to shooting.

@devildog_iii3492

5 жыл бұрын

Out of 300rds I had 2 ftf and a couple out of battery. But the stiffness is getting better, but I’m also selling it.

@letsgorangers5264

5 жыл бұрын

Sorry you’re having problems with it. Thanks for the information though.

Ive got almost 1k rounds through mine. Havent had a single issue.

@devildog_iii3492

4 жыл бұрын

Good to hear ur not having issues

@silverjohn4319

3 жыл бұрын

I just got one.. Same issues After trying to get apart to put on dot... finally got slide on... 50 rounds thru Shot good BUT still can’t get slide back off Shit suck But I do love gun. SIG tighten up... It shots but can disassemble SHOULD I SEND BACK?

@devildog_iii3492

3 жыл бұрын

Yep I’d send that back for sure

I have the same problem with on the video that we just seen with the weather but mine yesterday have not filed it yet cannot reset it part time to strip the gun

@The1jonnyz

3 жыл бұрын

A little punctuation and proofreading might help us decipher what you're attempting to say

I just bought one of these today after work. Idk if they did any changing stuff but the trigger feels smooth and reset is good haven't shot it yet but excited too tomorrow. It just felt better in my hand than the glock 43x.

@devildog_iii3492

2 жыл бұрын

Good to hear, kinda hit or miss I’ve noticed. I loved the way it felt and shot but couldn’t trust it. The 43x was ok but never really liked glock that much anyway.

I just cam from the range, shot a P365 XL, Glock 43X, VP9C, and a Walther Q5 , all with the same ammo, and I had 8 failures to go back to battery after shooting it. I had to tap the slide forward really hard for it to go back into battery. I am not happy at all, specially because I had no issues whatsoever with the regular P365.

@devildog_iii3492

4 жыл бұрын

Yep, I sold mine and am done w sig. back to carrying my CZC PCR for good.

@rangerdanger10

2 жыл бұрын

I've had MULTIPLE failure to return to battery and slide lock back after and empty clip. Also blew out a 12 round mag. Straight out the bottom. Also 15rd mag got loose after a couple rounds. Had to re insert it.

Mine did the same thing, it gets a lot better after you put some rounds through it. I would expect the return to battery issues to occur.

@devildog_iii3492

5 жыл бұрын

Great.. haha

My XL did the same thing I put 100 rounds through it I did a lot of dry fire and now it’s hardly noticeable I did notice that the P3 65 original it’s disconnect angle is different than the one of the XL so I ordered an original and I’m gonna put it in there and see what it feels like

@devildog_iii3492

5 жыл бұрын

Nice. Let me know

Love my 365xl had had no issues and racks perfectly everytine no matter if the trigger is held or not. Probably will clear up after you clean it properly and shoot it a bit.. but my xl has been amazing

@devildog_iii3492

5 жыл бұрын

Good to hear

@Alex-mo9qt

5 жыл бұрын

@@devildog_iii3492 My 365 XL was stiff too at first but not as stiff as yours, if you shoot 50 rounds through it and it dosnt loosen up then send it back to sig

My p365 xl has no issues with the slide when testing trigger reset it is smooth no hang ups or stiffness at all and it’s fairly new only 50 rounds so far since purchased for my wife

@devildog_iii3492

3 жыл бұрын

Good. Seems about 50/50 w the issues. Or maybe they fixed it

Picked one up a couple weeks ago to compliment my Hellcat. I'm having the same issues as you even after 300 rounds. I bought it because I like variety, but am probably just going to sell it and pick up another hellcat but this time in FDE for, you know, variety.

@devildog_iii3492

3 жыл бұрын

Sorry to hear they still haven’t fixed the issues.. haha I want the fde also. My summer carry is a hellcat too

I’m having the same problem you were having what do you do

@devildog_iii3492

4 жыл бұрын

I sold the problem

Bought mine about a month ago, I've dry fired and reset the trigger, feels smooth as butter... I dont have this issue, however I also haven't had the time to take it to the range yet because of work... 🤷‍♂️

@devildog_iii3492

4 жыл бұрын

Good to hear. Maybe they changed something

@devildog_iii3492

4 жыл бұрын

Unreal... yea I’m done w them then

@anonymouswatcher5733

4 жыл бұрын

Devildog Minuteman I bought mine 3 weeks ago and mine is fine . IDK 😐

@devildog_iii3492

4 жыл бұрын

Haha yea I hear it’s luck of the draw. Hope urs stays good

2 years later I just unboxed mine and it does the exact same thing.. Sliding it just gets stuck and feels gritty and..... Man honestly unacceptable... I hate how reseting when dry firing feels😡

@devildog_iii3492

2 жыл бұрын

Really.. man that sucks. Feel like it’s 50/50 still w people saying that. They should all definitely be the same. I still don’t know why some do that

I imagine that sig designed it to lock up a little on the initial pull of the trigger to combat the issue of primer drag from the original p365. On top of that, I’ve handled a few at different local gun shops now and the lock up is not as taxing on your finger muscles as this guy makes it seem. I’m actually more concerned about the slide release, it is VERY stiff (more so than the usual factory stiffness) on the ones that I’ve handled.

@devildog_iii3492

5 жыл бұрын

The slide release is fine on mine. And yea, it is taxing

Good stuff. I held one of these 365 XL’s at the local gun store yesterday when I was buying my Glock 48. I got the Glock 48 with the new black slide and Ameriglo night sights. I love it! Have you tried out a Glock 48 yet? If so, what’s your opinion? I really like how the 365 XL feels in my hands and I want one but I keep hearing about all the problems with it. I’ll wait for another year when SIG irons out all this crap. Thanks for the video man!

@devildog_iii3492

5 жыл бұрын

Nice. I carried a 43x for a while and really liked it, but I keep going back to the compacts like the 19. If I get another X it’ll be the 48. But I’m gonna start carrying a CGW CZ PCR for the winter at least. I love the way the XL feels in the grip and has a good enough trigger, and I’m accurate w it at 60’. But I just can’t trust it, even if I put 1000rds thru it. It’ll always be in the back of my head..

@darthvaydr

5 жыл бұрын

Devildog Minuteman completely understandable my friend. We all want something that goes bang each time you pull the trigger, especially when it’s your carry gun and your life depends on it.

@devildog_iii3492

5 жыл бұрын

Exactly

@rudygonzales2003

Жыл бұрын

I just picked up a p365xl. And just like you was very disgruntled as I'm used to the ease of my P10s. Relatively around the same size. And my CZ came out the box ready to go. That being said, after 500 rounds, I found the 365xl was coming around. And the slide release is butter, trigger reset lost its grit. That's just my experience within a week of purchase.

@devildog_iii3492

Жыл бұрын

Yea my CZs will always be first. Love my P10s also. Except the M, couldn’t shoot it well enough.

I thought I was the only one having this issue with racking. In the other hand my p320_m17 is just so soft

@devildog_iii3492

2 жыл бұрын

Quite a few people have been having this issue. Yea my 320 was super soft

Guy with meat hooks reviews sub compact gun, can't wait to get mine.

@devildog_iii3492

3 жыл бұрын

Meat hooks need love too..

Mine is the same way and that’s why I’m watching videos to see if mine was the only one. Hell I thought I had the spring in backwards lol. I checked my 365 and 320 and they wasn’t like that either then I jumped on KZread lol. Good video bud

@devildog_iii3492

2 жыл бұрын

Man another one.. there’s a few videos about it. Do u know when urs was made?

@poorboysedcandflashlights5934

2 жыл бұрын

@@devildog_iii3492 I do not. I just bought it a month ago

@devildog_iii3492

2 жыл бұрын

Used tho?

@poorboysedcandflashlights5934

2 жыл бұрын

@@devildog_iii3492 no I bought it brand new from Royal King. 629 plus tax cost me 667 out the door. I’ve noticed a skin mark on the bottom of my slide right above the take down lever right on the corner/edge of slide.

@devildog_iii3492

2 жыл бұрын

I’ll have to ask my buddy if he sees anything

I just purchased my sig p365, I noticed my pistol dies the same as what u are demonstrating... I have no range time with mine yet... I've been reading about of forums where poeple are having issues with their pistols failing to go into battery...for the price and quality Sigs are supposed to have, there should not be any issues... I will post and let you know how mine performs tmorrow as ibwill go try fir the first time...

@devildog_iii3492

4 жыл бұрын

Completely agree. I’d appreciate the update.

@leonelgarza8149

4 жыл бұрын

reyes051000 so how did it go at the range man?

Mine has the same issue went to the range did over 200 rounds and I havent had any issues,it seems like is getting better

@devildog_iii3492

4 жыл бұрын

Good to hear. Mine didn’t get any better, sold it

@archielula

4 жыл бұрын

Gabriel Roman Did you have the same problem

I got the fix for you. I took mine apart, figured it out and got it resolved. No new parts needed.

@devildog_iii3492

4 жыл бұрын

I fixed mine too, I sold it haha. But what did u find?

@sportster350

3 жыл бұрын

@@devildog_iii3492 how did you fix it. I have the issue.

@devildog_iii3492

3 жыл бұрын

I sold mine, lance still hasn’t said how he “fixed” his..

Striker drag because of how much oil you poured into it you get that into the firing pin or around it will get stuck like any other gun

@devildog_iii3492

4 жыл бұрын

Ahhhh what..? ok, so I know what striker drag is..? This came from factory like this, I hadent touched it or oiled it prior. And I don’t pour oil anywhere haha.

GOOD NEWS for you...try shooting it! I just picked up a 365xl a couple days ago. Brand new out of the box the trigger is shit! Exactly as you described. I was really pissed and wanted to send it back. But, I calmed down, racked it fast 100 times, dry-fired about 50 times and it smoothed out. It went from gritty to smooth and the break has a definite "thud." There is no reset...the reset is the wall. It has a slight rolling break and the grit has worked its way out, and yes, it does feel like something is catching when you try to reset by racking it by hand, (shoot it instead). And don't shoot this without cleaning off that horrible oil Sig puts on it, it actually has a sticky feel from attracting dust. Clean with a good CLP and run it a bit wet at first. I also, bought a 48 at the same time...of course Glock can be shot right out of the box. There is no question the 48 is the better built gun, but it's also a lot bigger. The trigger feels improved over the original 43m (no more phantom reset) , but hate the serrations. So, it's off to visit Johnny Glocks again. Or, I might simply dremmel the serrations down, shave down the dingus just a millimeter and leave it at that, I noticed on my Gen 5s with the smooth trigger, you barely feel the dingus on your finger. Whatever you do, when you buy a new gun and you're the first to ever touch it, give it time, rack it fast 100 times and play with the trigger, but before you get dejected, clean/lube, shoot it at least 100 times, then come back and let us know what you think.

@devildog_iii3492

5 жыл бұрын

Love my 43x but always like trying the new toys. Glad it smoothed out, gonna give it 500rds Tuesday and see what happens. Hopefully it’ll be good.

@meangene4038

5 жыл бұрын

Be sure to let us know after you shoot it@@devildog_iii3492

@devildog_iii3492

5 жыл бұрын

I’ll do range footage and follow up

You can eliminate about 90% of that gritty feeling by disassembling the gun and flushing the trigger mechanisms with oil. Work the parts a little to flush out the debris. Wipe off the excess thoroughly with a microfiber towel (HF ones work great). You just need to shoot the gun it will work out that issue you're having with the trigger and racking the slide.

@georgegould667

Жыл бұрын

It’s a brand new firearm !

@sheltonchampion5976

Жыл бұрын

@@georgegould667 right. For the price tag that should’ve already BEEN DONE or NOT NEEDED at all.

Same issues that you had with your XL. Mine is gone.

@devildog_iii3492

4 жыл бұрын

It’s completely gone now? How many rounds did it take?

@MDpolo

4 жыл бұрын

Devildog Minuteman about 550 rounds. Sold it.

@devildog_iii3492

4 жыл бұрын

Me too

Kind of a downer as I hope it works out for you whatever route you go with it....Good stuff....

@devildog_iii3492

5 жыл бұрын

Yea.. thanks man

I went to gun store to purchase p365x and came across to notice this hard pull to rack the slide when trigger is locked back (I did this to check trigger reset). So after 2 years..., how is your experience with this gun? was there issue shooting many rounds? Please let me know so I can decide if I should purchase this gun or not... Thanks...

@devildog_iii3492

2 жыл бұрын

I gave it 600rds and it had issues so I got rid of it. From what people comment it’s 50/50. Thank you for saying “checking trigger reset” lots of comments on here from people that don’t know how to test a firearm haha.

U ever sell this gun or did it work itself out, I betting it got better.

@devildog_iii3492

3 жыл бұрын

Sold it

Yep that Shadow 2 is amazing :)

@devildog_iii3492

3 жыл бұрын

She makes shooting easy gaha

@theexpatgunner

3 жыл бұрын

@@devildog_iii3492 sure does especially on the single action follow up shots 😀

Watch = Justin Opinion's video " Sig P365 XL: Is it broken." Exact same issue.

@dustinn5490

4 жыл бұрын

sam hicks - but it shot fine in his follow up video

@samhicks7568

4 жыл бұрын

@@dustinn5490 I saw that, I'm glad too, I'm thinking about buying one.

@devildog_iii3492

4 жыл бұрын

Sold mine.

Mine was like that from the box. I took mine to the range and shot it to break in. That simple.

@devildog_iii3492

3 жыл бұрын

Well it wasn’t that simple for me. And no way any gun should have to be “broken in” with an issue like that. A bunch of FTFs and same issue after 1000rds that piece of crap is gone.

I put a little over 100 rounds and i am having return to battery issues. I am having second thoughts on this gun. Anyone else having this same issue

@devildog_iii3492

4 жыл бұрын

Yea Devil, same shit for a lot of us..

@instantanioinigo792

4 жыл бұрын

I had the same issue when i first bought it. I called sig customer support and right away they asked me to send it back, they sent it back within a week. I got it back and it works great, no more issues. They replaced the main spring.

So how does it shoot?

@devildog_iii3492

5 жыл бұрын

6” group at 60’ 300rds 2 FTF and issues w the mag followers sticking where the mag release notch is.

Got I would estimate 4000 on mine original recoil spring and extractor …..if it resets when it fires it’s not a problem lol 😂

@devildog_iii3492

2 жыл бұрын

Good for u. I had 600 thru it w tons of issues

2500 rounds through mine. No issues yet. Dude probably bought that shit at an auction bc mine resets great with a lot less force to rack. Maybe hit the weight room??

@nebim488

3 жыл бұрын

Guys stop buying shit from cheaper than dirt! Lol

I thought same thing that completely goes away after 50 rounds I promise

@devildog_iii3492

Жыл бұрын

I put 500rds thru it in the first time out. Still had the issue w some fte/ftf.

SNAP CAPS should eliminate the difficult racking during reset.

@devildog_iii3492

2 жыл бұрын

Didn’t for me when I tried

I was thinking about buying an XL But, no thanks I’ll Pass. I’ve seen the gap in between the slide and frame too plus the loose wiggle. I’m not paying $600 plus for a polymer pistol that has those quality issues

@devildog_iii3492

Жыл бұрын

Yea I want the Marco but naw..

My question. Why did you buy it? If ordered on line. Why did you accept it from the ffl and not refuse it? You don't function check before buying? Seriously?

@devildog_iii3492

5 жыл бұрын

I did function check it, IM THE FFL. And that’s why there’s warranty.

Dude i bought one and the same thing it did the same thing but it did get smoother after firing it a few times

@devildog_iii3492

4 жыл бұрын

So far it seems 50/50. I had around 500rds thru it and still didn’t smooth out so traded it away. Have the Hellcat now which I hate Springfield cuz the politics. Wish HS would of released it. But it’s everything I’ve been wanting

@devildog_iii3492

4 жыл бұрын

Flip Rodriguez from ANW..?

@fliprodriguez1964

4 жыл бұрын

Yea i wish people where more honest about the pistol, instead of bsn About the newest firearms I must of watched 100 videos on the 365 xl and yours and maby 5 other videos showed this flaw... and no im not that Flip Rodriguez lol im the original !!!

@fliprodriguez1964

4 жыл бұрын

How is the hellcat? I was thinking about it but the same thought came to mind about it politics.

@devildog_iii3492

4 жыл бұрын

Yea most of the big guys aren’t gonna say shit about free product. Haha, was wondering.

I think that people wanted something amazing no issues from the gun. My p365, had dead sights. Got replaced no issues. Striker drag is typical of a small pistol. As far as Sig goes, not really interested in the latest greatest. Did get a cz p-07. Great gun, and bringing the H&K usp 40 back on line. Good luck

@devildog_iii3492

4 жыл бұрын

We were expecting sig to fix their issues, which there is no more striker drag, but now there’s just new issues.. Was gonna get the P07 but went w the CZ Custom PCR, it’s lighter and thinner than the p07

I just looked at one at a local store. Trigger reset is completely undetectable. Why in the world do none of the big KZreadrs mention this?

@devildog_iii3492

3 жыл бұрын

Really? I can’t remember how this reset was.. I’ll have to re watch video. Got rid of it

@bradh6185

3 жыл бұрын

@@devildog_iii3492 Yeah, I couldn't really tell in your video. The one I was looking at was at Atwoods. I've seen blemishes and stuff on some of their stuff. I don't know if they're selling rejects or what. But there was ZERO indication of any reset on it.

@devildog_iii3492

3 жыл бұрын

Yea that wouldn’t fly with me

I've had 2 failure to feeds in 700 rounds on my 365xl. Mine was made in march 2020. There's a good bit of creep in my trigger reset as well. I love my 227 but this 365 is something else.. The first f2f was with magtech ammo on the second shot ever fired. The second f2f was with CCI around 600~ rounds. Hard to love something that doesn't work properly

@devildog_iii3492

4 жыл бұрын

Yea I had quite a few ftf or battery issues. It’s since been sold and I’m done w them

@tylerparker3024

2 жыл бұрын

Every pistol will have failures from time to time.

@devildog_iii3492

2 жыл бұрын

Yea but not not every mag

I've got 950 trouble-free rounds through mine. I carry it every day. At no time do I ever function my gun the way you do in this video; testing the reset. Your worry about how the slide works while doing what you are doing is without merit. The gun fires and cycles perfectly every time. Unless you like to show a lot of people what the reset on the gun is like, you will have no issues with the gun. Also, you won't notice what the trigger is like when you shoot it because you will not pull the trigger that way. When you need to defend yourself, you won't even remember what the trigger felt like. Enjoy your firearm. It will serve you well.

@devildog_iii3492

3 жыл бұрын

I had issues with ftf, fte, and out of battery/lock ups. And this was the only firearm that had the resistance during cycling like that. It does the same thing when u fire it. Ur fingers still to the rear and the slide comes back, and has to overcome that resistance. It shouldn’t be there period. I get ur point, but what internally is causing it? What parts are getting worn from it? Time will tell, and it could be at the wrong time, no thanks.

@Thesusoperator

Жыл бұрын

@@devildog_iii3492 he's a sig fanboy. look at his reasoning holy fuck

@devildog_iii3492

Жыл бұрын

I don’t waste too much time, to each their own I guess.

@1001Hobbies

Жыл бұрын

@@devildog_iii3492 - It seems like your particular gun had some kind of defect if you had failure to feed and eject. I've had about 4 or 5 different rounds through mine and never had any kind of failure, so your specific gun must have its own problem. Mine is still operating perfectly, and that must be the majority of the customers experience for it to have been the #1 selling carry gun at one point.

@1001Hobbies

Жыл бұрын

@@Thesusoperator - No. All I talked about is my P365XL experience. It still operates perfectly, and has never had a fff or fte issue. It has been 100% reliable with 4 or 5 different bullets through it.

Just my 2 cents, I put 500 rds through mine and no issues, carry it everyday now. Trigger is getting better the more I use it, but I didn't have the problems you are having. That being said no failures through the 500rds I put through mine. Hope it works out for you, I love mine.

@devildog_iii3492

4 жыл бұрын

I had issues w mine during 400rds of testing.. wish I didnt

Lately SIG has been disappointing the shit out of me. 320’s are going off in their own, 365’s are having major trigger issues, QC has been ass. I was not initially a Glock guy nor did I trust it very much at first. But after buying and carrying Glocks I have become a major fan. It is also one of the only guns I truly trust to carry Hot in my waist band. It’s hard trusting guns like sigs in your pants Hot and loaded never knowing if it’s going to go off on its own. The more I see these gun failures the further I get from SIG and the more in love I am with my Glocks. Only other brand I can also trust is the S&W guns for everyday carry.

@devildog_iii3492

Жыл бұрын

Yea me too.. I’m strongly into CZ now days. Couldn’t be happier.

I'm convinced. Are there any other companies other than Sig that I should stay away from

@devildog_iii3492

3 жыл бұрын

Kel Tec. Sccy. Etc

Your pistol needs to go back to sig for repair.

@devildog_iii3492

4 жыл бұрын

Yea I got rid of it for good measure..

Something is wrong with your gun. Mine doesn't do that.

@devildog_iii3492

4 жыл бұрын

Yep. Appreciate it man. Most people just say “that’s normal”..

For similar size similar round count and a lot more features I will take the Taurus g2c which run flawless and cost $400 less... for six hundred bucks I want to know that what I'm buying is going to run flawless and this is not there yet

i love my XL .. I have ZERO issues. I think you have all that damn oil on the outside of the gun maybe put some on the inside!!!?? youre also comparing a brand new gun against some older ones. Maybe shoot it and break it in and it will loosen up? theres nothing to worry about. Id say a year later you LOVE the gun. IF you gave it a chance.

@devildog_iii3492

3 жыл бұрын

Yea.. it was plenty lubed inside and after 1000rds and multiple ftf/fte it was sold. There’s plenty of other guys on here that have the issue too. Glad urs is ok, but there’s an issue w some. Zero issues with my Hellcat so far with 5k rounds thou

@Ryan.S924

3 жыл бұрын

Devildog III you brought up a Springfield? You must just have never liked Sig? Hey that’s a good video idea. “Why I don’t like Sig and like everything else” lol. I love my 365xl and X5. I also really enjoy my Canik Tp9SC elite blackout and my cheapest very first gun. SW SD9. NOT the VE.

@devildog_iii3492

3 жыл бұрын

I’ve liked shooting sigs but the new ones just don’t do it for me. Trust me, I HATE Springfield and their politics. I wish HS would bring the guns in by themselves.. but It fit a need well and I carry it when not carrying my PCR Custom or M&P 340. Shot Caniks for a while and liked them a lot. I always end up back at CZ thou. I have firearms from all different manufacturers thou.

I've been seeing sig go down for years. Is it just me or do they look cheaper now?

@devildog_iii3492

5 жыл бұрын

Looking a little cheaper in my eyes

@iidawgg

3 жыл бұрын

This didn’t age well. They are the single most innovative gun company today.

@devildog_iii3492

2 жыл бұрын

Innovative as in?

@iidawgg

2 жыл бұрын

@@devildog_iii3492 they manufacture modular firearms (p320, MCX), rifle scopes, binoculars, red dots, thermal optics, aftermarket parts, gear, etc. you can hate them but they are innovating while everyone else is sitting on their butts.

@devildog_iii3492

2 жыл бұрын

Kel-tek is more innovative haha. They’re red dots suck also

It’s because they’re built solid and tight. Mine did the same thing. Fire about 100rds through it and problem solved

@devildog_iii3492

4 жыл бұрын

I have custom guns that don’t do this, and after 500rds it hadn’t changed.

@The1jonnyz

3 жыл бұрын

It's not because they're solid and tight. My CZ's are solid and tight and don't have this problem. My Beretta's are solid and tight and don't do it.

@devildog_iii3492

3 жыл бұрын

Yep. My CZs are smooooth

Mine was doing the same thing. There is a trigger reset mechanism on the right side of the rail system. After a few hundred rounds it broke in and didn't have the resistance. I had significant barrel wear on the hood and left side of the chamber. I think this was causing it to fail going into battery a few times. Sig asked me to send it in. Still waiting on the results.

@devildog_iii3492

5 жыл бұрын

I racked mine 100 times and have wear on hood already haha. Let me know how urs goes

@skouni2

5 жыл бұрын

@@devildog_iii3492 I had the same thing when dry firing before I took it to the range. Strange, but will update when I get it back.

@skouni2

5 жыл бұрын

@@devildog_iii3492 Just got it back. They replaced the barrel and test fired. I can tell there is less resistance when pulling the slide back. Sounds like the tolerances were too tight. I would suggest contacting them on yours as well.

@devildog_iii3492

5 жыл бұрын

Thanks, just reached out

send it back to sig they will fix it

@devildog_iii3492

4 жыл бұрын

They gave me BS lines for 4 emails before they wanted me to send it back so I did myself a favor and sold it.

Send it back to sig ! They will fix it

@devildog_iii3492

5 жыл бұрын

Yea after 3 emails of them in denial they finally said send it.

@josh48315

4 жыл бұрын

Devildog III did Sig fix it? What did they say was the problem?

@devildog_iii3492

4 жыл бұрын

I ended up selling it instead of sending it in. There’s other vids out w the same issue now.

@josh48315

4 жыл бұрын

Devildog III damn what date did you buy yours? I wonder if this is an old problem or still current

@devildog_iii3492

4 жыл бұрын

Whenever this vid was posted. People still complain about the issue thou.

500-600 rounds with no issues.

@devildog_iii3492

4 жыл бұрын

Wish mine did that..

Buy a $325 Canik TP9SF-Elite, you'll be happier ..

@devildog_iii3492

5 жыл бұрын

Have it, works even less than the xl

@anubisgodofgods

3 жыл бұрын

@@devildog_iii3492 you luck with guns sucks. Sell all you have and hope you never need one.

@devildog_iii3492

3 жыл бұрын

Naw, I’m good w CZ

@richki.24

3 жыл бұрын

Devildog III , love my CZ too.

Thank you beta tester. Like the original I'll wait for the upgraded version. Everybody wanting to be the first to make a video. My $600 will stay in my pocket while you guys piss and moan about the next new thing

@devildog_iii3492

5 жыл бұрын

Didn’t cost me close to 600..

@SHUB281

5 жыл бұрын

@@devildog_iii3492 well , it wasn't free

@devildog_iii3492

5 жыл бұрын

Yea, but I’ll sell it for more than I paid

I realize im late to the game here...but something is wrong with that gun....only time mine wouldnt rack easily is when i put slide on without making sure the little safety lever that actuates the safety plunger was out of the way. I hope you didnt do the same and then force it back because that would no doubt damage gun. ( you pointing that part out specifically and telling people to make sure its down makes me think you learned that one the hard way?) Otherwise something else is clearly wrong....maybe too much gunk in striker channel from the looks of how wet that gun is.... I own quite a few pistols including wilson combat, cz, smith n wesson, springfield, kimber, colt, ruger...and the p 365 xl is one of if not my favorite. If you sell that gun as is...your selling a defective pistol and should let buyer know...or shame on ya. If youve taken thing apart and broke it putting it together again its not brand new.....

@devildog_iii3492

2 жыл бұрын

It was like that soon as the postman dropped it off. Lots of others had the same issue documented. Sig still hasn’t said a word about it far as I know.

@broot1375

2 жыл бұрын

@@devildog_iii3492 Your the first person ive seen mention that actually. The early 365s had there share of issues...the 365 xl ironed em out. But to each his own if you dont like the sig go do what most do and buy a glock. 43x is a decent gun but id take the 365xl over it any day. Cost more to begin with...then you gotta buy some sights...theres another 100 bucks...then you gotta buy a decent trigger...100 bucks...then you gotta modify frame so you dont get glock knuckle...

@devildog_iii3492

2 жыл бұрын

I was the first to do a video on it but there quite a few of us trying to figure it out. I’ve had some glocks but not a fan really. Carry a CZC PCR or 340PD usually. Hellcat also sometimes but I hate Springfield for the politics

@broot1375

2 жыл бұрын

Well at least your not a glock fanboy....take care hope you got the gun worked out...its an outstanding firearm

This video alarming lol. I get mine tomorrow 5/11/2020 hope don't have same issue :(

@devildog_iii3492

4 жыл бұрын

It seems to be 50/50. Let us know if u do.

@rfrank1955

4 жыл бұрын

Well? How is it? I just ordered mine this morning and would be interested in how your turned out?

@santiagoaguilar3787

3 жыл бұрын

I got my p365 xl today and it has the same issue 😵

@devildog_iii3492

3 жыл бұрын

Sorry man.. annoying

@silverjohn4319

3 жыл бұрын

@@santiagoaguilar3787 mine too but It shots and after 50 rounds no problem but I CANT GET MY SLIDE OFF... yes I have release straight up and down... won’t slide off

Put some rounds thru it man. Theres nothing wrong with that gun. Mine is just fine

@devildog_iii3492

4 жыл бұрын

500rds, FTFs, battery issues and still an issue

Jeeze relax Bro. I dry racked and dried fired my 365XL about 10 times and the problem subsided I fired over 200 rounds and now the problem is GONE. Its a machine it needs a break in period, weather that period is dry firing or shooting it needs to break in. Could be 10 rounds could be 1,000 rounds shoot the gun it will work

@devildog_iii3492

5 жыл бұрын

It didn’t work well enough. FTFs, mag followers and out of battery issues

Just shoot it! I noticed the slide release is stupid hard on an empty mag but who cares works fine with no mag or loaded mag.

@devildog_iii3492

4 жыл бұрын

I did and had failures

If you tried the trigger at the gun store when you bought it and it’s that bad why did you buy it? Why not shoot it if you bought it? Call sig and see what they say, I’m sure that’s not normal.

@devildog_iii3492

5 жыл бұрын

I’m an FFL, this came to my house so no chance to try before buy

Not for. Nothing but it brand new not broken in... you haven’t even shot it once... what’s with all these opinions without testing it out?

@devildog_iii3492

4 жыл бұрын

Well because out of the hundreds of pistols I own, this is the only one that has been like this. And after 500 rounds and battery/ftf issues I’m done w it.

Hello remove the magazine and rack. Good pistol

@devildog_iii3492

4 жыл бұрын

Hello since this is the only pistol out of 100+ that I own that does this, it needs attention. It’s the same thing as the gun firing the last round in a mag and cycling, should not have this much resistance.

@pavelavietor1

4 жыл бұрын

@@devildog_iii3492 yes is the efect of cramping a big load in a small space it produce drag saludos

@devildog_iii3492

4 жыл бұрын

I’ve got other very small 9mm that don’t do this

@pavelavietor1

4 жыл бұрын

@@devildog_iii3492 yes me to I am no defending the pistol is not perfect but work.dont sale it try it out..Thanks for replying.. saludos saludos

@devildog_iii3492

4 жыл бұрын

I put 500rds thru it and it had ftfs and an fte. Still didn’t loosen uo

Mine did it until I shot it a few times

@devildog_iii3492

4 жыл бұрын

So it cleared up? Mine had 500rds and still no difference..

@terminallance2330

4 жыл бұрын

Devildog Minuteman yes I shot about 450 rounds and did a lot of snapping in, my weapon has a DOB of Nov 2019

@devildog_iii3492

4 жыл бұрын

I did a ton of snapping in, but mine was one of the first to ship. Maybe they figured something iut

@terminallance2330

4 жыл бұрын

Devildog Minuteman maybe, are you still running it or did you sell it??

@devildog_iii3492

4 жыл бұрын

It’s been gone for a while, but I’m always tempted for another

Just go shoot it all it is is stiff. Lube and shoot. Mine was stiff and once I shot a couple hundred rounds loosened up. My Shield was the same way.

@devildog_iii3492

5 жыл бұрын

Have never had a pistol act like that new thou, glad it works out

@kerryhartman4497

5 жыл бұрын

Mine did the same thing. After 150 rounds it doesnt do it anymore.

@zoekerux777

5 жыл бұрын

Yes! Keep shooting it. It will work itself out. Once upon a time, people were comfortable with a "break in period". It's still so today with high quality 1911s and such. Just keep working it and it'll be golden!

@devildog_iii3492

5 жыл бұрын

Yea put 500 thru it the other day and it’s defiantly smoothed out, but not gone yet. 1 FTF and the follower stuck a couple times..

WTF SIG??? The answer is to save $400 and buy a Taurus G2C. It has a much better reliability track record than the P365. Hard to believe huh? It's true.

@devildog_iii3492

5 жыл бұрын

I’ve heard good things about it except not firing in cold weather.. this is a T&E gun so..

Worst pistol ever. In 30yrs only pistol i had to send back. Locked up at 3ords. Trigger is dead and cant disassemble. Dont buy a sig

@devildog_iii3492

2 жыл бұрын

Yea unfortunately I had the same luck

Click Bait. Nothings broken, nothings broken at all with this pistol. The only thing you found wrong with this gun was that the slide was hard to rack when you were holding the trigger down. The gun is a revolution and concealed carry. It’s not gonna work like the other pistols.

@devildog_iii3492

4 жыл бұрын

Yea there is something wrong w it, that’s why half the guys that have this pistol don’t have the issue. And why countless other YTbers have made videos after I made this one. But thanks for ur useless input.

The problem is that’s a safety mechanism for your own safety Who pulls the trigger when wanting to rack the slide otherwise you would have a accidental discharge

@devildog_iii3492

2 жыл бұрын

That is the dumbest thing I’ve ever heard anyone say haha. Absolutely not true at all.

Sig is not impressing me

@devildog_iii3492

5 жыл бұрын

Nope..

Make a hate video without even shooting it is worthless.

@devildog_iii3492

3 жыл бұрын

Didn’t need to shoot it to know it’s a piece of shit!

Why the hell would you need to rack it holding the trigger?.... ClP and wear the fu**er in and quit crying

@devildog_iii3492

5 жыл бұрын

Really..?? To check the fucking trigger reset, and guess what? Ur still holding the trigger when the slide comes back from being fired. So why the fuck would I want all that resistance there when EVERY other gun ive ever shot didn’t have it?? I’m trying to carry this gun, if it doesn’t give me confidence right away why would I waste ammo and time seeing if it breaks in? And what if it goes 1000rds fine? The old ones broke at 1-2k

@MoJohnson58

5 жыл бұрын

@@devildog_iii3492 sounds like somebody needs a lesson on firearms and how they function 😂

@devildog_iii3492

5 жыл бұрын

Yea haha.