Wrap a non-working Led Bulb with electrical tape and fix all the LED lights in your home
Тәжірибелік нұсқаулар және стиль
Hi everyone! Today we Wrap a non-working Led Bulb with electrical tape and fix all the LED lights in your home.
2 Easy Ways to Repair LED Lights using a 1.5v battery and some insulating tape for the second one I used a soldering iron to repair the light bulb.
I hope you enjoy watching my video!
On inventor 101 channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
#ledlights #repair #DIY #repair #ledbulb
Пікірлер: 88
Your method is also very good, but it is only temporary. I also did it but I chose to replace the Led chip, it will last longer.❤
@bestgamesforkids1098
4 ай бұрын
Very good my friend
@MartinKing-zk8jr
4 ай бұрын
hola soy tu fan
@bloggsie45
4 ай бұрын
😅😅😅😊@@bestgamesforkids1098
@arcadiosroberes8067
4 ай бұрын
😢what material use to replace it.
@arcadiosroberes8067
4 ай бұрын
led chip
You are a creative person, keep coming up with useful ideas. Best Regards
Couldn't that have been done much more easily and inexpensively with a tiny piece of aluminum foil?
@kyleguindon89
4 ай бұрын
Yeah or a gob of solder
@NathanThompsonBlueEyes
3 ай бұрын
I laughed so hard when he spent a more expensive battery to fix a less expensive lightbulb.
@NathanThompsonBlueEyes
3 ай бұрын
Or literally the wire he used to test it.
I think it's a good idea to recycle and try to reuse so many disposable items that are manufactured today. Everyone, Please be safe on the way you make electrical.
You could've bridged that with anything but you decide to cut open a battery? 🙄
Why choose a battery for your source material - the last place I'd look. Just replace the led surely? A good demonstration that these can be repaired however 👍, perhaps use another 'broken' lamp as the donor
@sean8199
4 ай бұрын
In the 2nd half he uses a "donor"
I believe LEDs are polarized, so if you're replacing one with another, you have to replace it so the correct terminals match up.
@TheKuptis
3 ай бұрын
Yes, LEDs are polarized.
"This video is a testament to the power of innovation and practicality. By showcasing a simple yet effective method to revive LED lights at home, it encourages viewers to be proactive problem solvers. The takeaway? Don't underestimate the impact of small DIY fixes-they can make a big difference in our daily lives."
That electric tape in your title is 0.1 percent of the solution 😂. Scammer
Dont care for LED but find incandescent bulbs today lol like the phone booths and dinosaurs.
Hello Inventor101,amazing content I'll send a gretting👋🏻
धन्यवाद, छान माहिती दिलीत.🙏🌹🚩👌👍
Isn't it kind of dangerous to be playing about with live Electrics(like when it's in the lamp)
Good idea for quick fix
Thank you.
Just going to burn out the other LEDs shortly after that. They are wired in series which means more voltage is being dumped on to them now.
Thank you
I used a blob od solder
He does know that they sell them at any store pretty much
Một thí nghiệm thú vị
Nice!
Very nice❤
well done
Good idea
Very nice videos
A quick Google search revealed you can buy such bulbs, a 6 pack for a very reasonable £8.49. Good chance they can be found in your local diy store/supermarket if required urgently!
Nice 😊
I am big fan
Will that work on bedroom play toys?
Your inventions it's very well now
Amazing
Hi inventor 101, i want to know what song did you use in the video where you extracted hydrogen with the help of a battery, please write the answer. I will be very grateful!
@alexbrands11
4 ай бұрын
"Подари мне фраер розовый наган!!"🤣🍥🤣
Genial 👍🏻
This is a ridiculously complicated solution to a very simple problem to fix.
Good
Aluminum tape vid please
Will this work on a 5 ft long LED shop light
@TheKuptis
3 ай бұрын
Possibly, depending on if this is the issue with your LED shop light.
Столько просмотров и подписчиков на такой триппак,даа конечно.😂
@anisimovamaya7248
4 ай бұрын
Я рада, что так много людей любят смотреть на такое рукосуйство и немного заниматься своим вместо более вредных занятий.
I am seriously disappointed that you advocate cutting into a battery. If one of your viewers miscalculates the location of the cut, there might be some liability on your part for any injury incurred by the viewer.
Here the first method i used alluminium or copper tape but it works for few days or month only.. Second method i used resistor from AC i/p but obviously now less watt so low brightness but how long it will work i don't know 🤣
Lightbulb in trouble, don't have no fear! AA battery for your rescue is here!
This is going to blow the other leds in the bulb in no time. It will work for a short while, but it's also a fire hazard. Just buy new bulbs, they are really cheap...
@11001001110100
3 ай бұрын
It's also going to cause some kid to try this in real life on a mains connected system. Talk about irresponsible.
Türkiye'de şuan saat 7:00
sacar una chapita rigida de una batería vieja es una pesima idea. Lana de acero o bolita de papel de aluminio se adaptaría mucho mejor.
If the LEDs were in parallel instead of series then this particular instance wouldn't be an issue. Blame the manufacturer for making it this way so if 1 LED goes then the whole bulb no longer lights.
Much easier to buy a new bulb 😅
What's the point showing inexperienced people who could end up getting electric shock for the sake of a couple of quid 🙈⚡
@MrArby80
3 ай бұрын
To be fair they are more likely to cut themselves hacking at the battery.
Ola
Report these channels. Dangerously misleading.
Hola
Led bulbs are 5x for less than $20.
😉👍🙏
Now take those skills, get a job & work for 15 minutes & you can afford to buy new bulbs instead of wasting 7h trying to fix one.
🇮🇩
Interesting, but I think I would just rather buy a new bulb.
👍😀
You SORCEROR!!! I was baffled as you worked the metal tube into a claw...but when I saw the soldering iron, I blurted out "Whoa!" and straightened in my chair. I love how your technique always includes a point where a project shifts into turbocharged mode.
Like
старье.
Y'all are doing too much 🤣🤣
This is so wrong in so many ways.. 👎👎
I cringed a little watching you drag your file backwards on the brass pipe... Thanks for the content though
You just ruined, used, and wasted more than a bulb would cost LOL
6 7n 6iju
First view please
I am the first person 😂🔥
@irishguyjg_2ndchancerecovery
4 ай бұрын
That's so 90's
@DIYTechTrends
4 ай бұрын
@@irishguyjg_2ndchancerecoveryme too 😂
Phương pháp của bạn rất hay để sửa đèn led bị hỏng