Very nice vehicle WPL is great 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@theminiatureconstructionco4556

2 жыл бұрын

They do make really nice scale body's for cheap. Roll on the KM version. 👍👍

I just bought one can't wait!!!

nice kit and great build

@theminiatureconstructionco4556

2 жыл бұрын

Thank you very much! Thanks for taking the time to comment. 👍😄👍

There's an amazing amount of power in that little stock 180 motor. I'm not going to upgrade my C-14, I'll just stick with those 180 motors.

@theminiatureconstructionco4556

2 жыл бұрын

Not bad at all really. I was genuinely surprised, not a patch on the two speed for control but not bad considering the size. The battery was the one. I filmed the whole video on it in the woods and still drove it back to where I started from. Easily 40mins. 👍😨

I do like these, really good value imo.

@theminiatureconstructionco4556

2 жыл бұрын

Yeah there not bad. 👍

Looks really nice ! Thank you for sharing!👍

@theminiatureconstructionco4556

2 жыл бұрын

It's not a bad little truck as standard. Quite impressed. 👍

Cool video, great to be there with in the build shed so to speak whilst the project is underway. The body is awesome from what I can see. Thank you kindly for the video, fun ✌😎 Just out of interest, have you got plans for going to the Southern Scale Trail crawling event? (if they still will offer a smaller crawler course that is, which I hope the organizers do)

@theminiatureconstructionco4556

2 жыл бұрын

Hello. I've not heard of it to be fair? 👍

at 16:30 yeap that's the tool for lifting the bonnet haha

@theminiatureconstructionco4556

2 жыл бұрын

I thought as much, as I was sat there looking at it! It also makes a fantastic little tool for flattening the transfers down as well!! 😄👍🙋😄

I hope wpl comes out right trinmiter d12 for sale in the future coz the trinmiter have 2 speed already and good for budget 😌

@theminiatureconstructionco4556

2 жыл бұрын

You can buy them on eBay! www.ebay.co.uk/itm/275065532450?mkevt=1&mkcid=16&mkrid=710-127635-2958-0

@theminiatureconstructionco4556

2 жыл бұрын

Hope this helps? Thanks for taking the time to comment! 👍🙋

I have a challenge for you to do with that ( if you are ok with it) the challenge is to make it look super scale and weathered and mod it like the landcruser of 4wd/24/7 (sooty) owned by shawn whale ;)

@theminiatureconstructionco4556

2 жыл бұрын

If I get the time and the opportunity I will definitely have a go for you. Meantime I will have a look at sooty? 🙋👍🙋

Are you going to weather it? You should do another weathering video soon haha

@theminiatureconstructionco4556

2 жыл бұрын

Hello John. No plans to, but if I get time I will be sure to document it for you guys! 😄👍🙋

does the chasis, shock, axel & other chasis part same/compatible with c24 model?

@theminiatureconstructionco4556

Жыл бұрын

Yes basically. It's the same bar the different body. 👍👍

@loop133

Жыл бұрын

@@theminiatureconstructionco4556 thanks 🙏

why’d you skip? idk what screws to use there are two different types?

@theminiatureconstructionco4556

Жыл бұрын

On which bit? 👍

@_N4VE_

Жыл бұрын

@@theminiatureconstructionco4556 no worries I figured it out lol unfortunately I ran into another problem. The covers for the rear/front end pumpkins end up binding the gears if try to tighten the screws so I have to grind away some of the insides

@theminiatureconstructionco4556

Жыл бұрын

@@_N4VE_ they do little paper gaskets to get around that issue. Normally doesn't affect the plastic axles only the metsl ones. 👍👍

@_N4VE_

Жыл бұрын

@@theminiatureconstructionco4556 ohh i see! didn’t think of that, I’ll cut some gaskets out and try. The plastic ones still bind when tightened so hopefully the gasket will work on the metal ones🙏🏽

@theminiatureconstructionco4556

Жыл бұрын

@@_N4VE_ should do. It's a well known issue. That's why with the metal axles they started providing those little paper gf gaskets. 👍