If you’re ever injured in an accident, you can check out Morgan & Morgan. Their fee is free unless they win. For more information go to www.wordontheblock.biz/r/2369/86/?s=FOR_THE_PEOPLE

@-Only.Facts-

11 ай бұрын

Love your channel. Would like to see the iconic Double H Harness boots put to the test! Loved by bikers and rockers world wide!

@MaxSluiman

11 ай бұрын

Can you do a boot of New Rock from Spain? The designs are very extreme and they have really good leather boots.

@victorpapillon1487

11 ай бұрын

Your videos are getting chitter and chitter, from the bluring to the drawing out the non hype fake controversy instead of focusing on real history, the Pfizer got you brain...

@mrsthatcher9815

11 ай бұрын

can you compare solovair steel toe boot with the gripfast now?

@thedraftdisorder1618

11 ай бұрын

Rose Anvil grew so large, that they're getting ads from lawyers. W

7:12 I feel like if your foot has to bend like that for the shank to break, you’ve got bigger issues than having a wooden shank.

@a1axel738

8 ай бұрын

Well what sucks is that the wood is going to flex a lot on its way to brake that way so it’s definitely not as much support as a stiff metal shank

@zakugodofwar1005

Ай бұрын

wooden shanks always break , he cut some boots with wooden shanks before, none of them aren't snapped.

@samanthamoore7615

21 күн бұрын

Exactly. You've got to acknowledge the reasonable use aspect with items like this . If your after a tough workboot to wear in factory conditions where steel toe caps and steel shanks are required then no these won't be any good but for general everyday wear and tear as a fashion /style item they're perfectly acceptable. You've only got to look at ballet point shoes to see the stresses that a wooden shank is capable of

I love this doc Marten series! Would love to see a series on skate shoes

@marcop.525

11 ай бұрын

He's some SB Dunks

@benlevitt3489

11 ай бұрын

There really needs to be comparison videos between the vulc skate vans and the cupsole skate vans and whatever the hell the Zabha is

@mutecommercials

11 ай бұрын

I wanna see és shoes get cut in half and compared to etnies.

@willyd-adv

11 ай бұрын

Same, old Off The Wall Van's used to last forever, new ones are trash.

@paulalfaro3076

11 ай бұрын

Skate Shoe September

After a couple Doc Martens failing to withstand the abuse I deal out to boots on the dance floor, I reached out to Solovair about their boots. A representative recommended the Gripfast over the Solovair for my situation. I haven't noticed an issue in the toes with the bunched up fabric. Love the chunky sole's look. Time will tell if the weld holds out, but otherwise it's a great boot for rivetheads. I'd really love to see a tear down of New Rock's Boot Black Rangers, or their "M-NEWMILI084-S59" (yeah, creative name), which are similar styles in the same price range. They make many of their boots to order, but they won't respond to questions about the construction methods they use.

@m.b.82

11 ай бұрын

Wtf are you doing on the dance floor!

@convoludedduded5086

11 ай бұрын

Sounds like he's in the mosh pit. I exclusively wear steel toe on the pit. Fuck that. Had one too many nails fall off from being stomped on

@primafortune420

11 ай бұрын

Did you mention weight? I'm in the market for new boots to last me the rest of me life and am currently torn between the Jim Green R8 and Solovair 6-Eye Broges but these are great because I need safety boot 2 months a year, these soles look heavy.

@skellingtonjack

11 ай бұрын

@@primafortune420 My Gripfasts are crazy heavy, but that's what I want. Jim Green doesn't seem to offer a steel toe option, but Solovair does in the 8-eye boots-with a wider foot shape, if that's important to you. If you don't need steel toes, but want a "rest of life" boot, then between the two options you are considering I'd recommend the Jim Green AR8, since it has a Vibram sole and stitchdown construction.

@danshakuimo

11 ай бұрын

I would think most people wear their boots in a size where their toes aren't significantly standing on the bunched up fabric anyways, especially with a steel toe where your toes will be farther back from the front. I feel like it's not as major of an issue than it seems. That being said, I have never worn a pair and didn't know they existed until now.

Yeah, you don't actually break in a pair of Gripfast boots. Eventually your feet just give up and they break you.

I bought a pair of Gripfasts thinking they were Solovairs since they're sold on the same website. Didn't even know there was a difference until this video 🤦‍♀️ Regardless, I wear them at my warehouse job every day and love them!

I have some solovair in the same greasy leather, the plasticy part wears off over time with abrasion and wear, revealing the true leather finish underneath. I quite like the look as it polishes off 👍

@MarkA500

9 ай бұрын

Their great leather looks awesome. I have the solovair 8 eye and these gripfast. Love them

Back in the 1980s, these boots (Getta Grips) had a wooden midsole. There was no need for a shank, the sole did not bend at all. I bet the screws are just a vestigial remnant of this construction.

@gaborporempovics2415

9 ай бұрын

Back in the 90s I had a pair of Getta Grips. I thought its midsole was out of really thick leather. It was not too comfortable, but it gave the boot some special feel that you are undestructable. I am pretty sure that it came from the midsole, while Gripfast can't provide this very feel.

@johnnynobuddy1

5 ай бұрын

I remember....I have several older versions and you can clearly see a mid sole 3 parts mind you... between the lug and the welt. The screws were functional. And in this video you can see they do break thru the lug. So backing them out or removing would allow water in and swamp the boot. He also talks about adheasion...I believe an or multiple adhesives are probably used in this sole samwich if you will. But this video is the only of its kind and I learn new stuff everyday.

I've been wearing Gripfast since 1998. I had my 3 eye patent leather steel toed shoes re-soled at least twice. These are better than Docs, Getta Grip, TUK, Tredair, Shelly Rangers, Grinders, or any of the like. The only better pair I had were "Gladiators" 3 eye steel toe oxbloods that I got in Camden market about 20 years ago. Thanks for the UK boot love.

I really hope Doc Martens and Solavair watch your channel. They need to know the game is up and they need to try harder. Thanks to you, we’re no longer fooled. 👍

@bulldozer9600

11 ай бұрын

That’s silly.. gripfast and solovair are made by the same company. So what game is up??

@NorthwestMariner

11 ай бұрын

@@bulldozer9600 He said DOCS and Solovair which are different companies. Both could definitely do better

@darrenhall7454

11 ай бұрын

@@NorthwestMariner thank you. 😁👍

@loverrlee

11 ай бұрын

Yeah this channel really made me reconsider my purchase of these style of boots

i still wear my 20 eye/5 strap gripfasts that i bought in 1998. many miles of walking, and goth dancing they clubs on the weekend. This series is great. Its bringing back all the trends of the 90s in my mind. I remember we used to have a doc/gripfast price estimate back then that was 10dollars an eyelet pair. 8 eyed docs, 80 bucks, 10, 100 etc. its crazy to me to see 8 eyed docs selling for 170. especially because they dont last these days.

That heat weld bums me out. I love the look of English boots but I’ve had the heat weld fail prematurely on every single pair I’ve owned- docs, solovair, and George Cox.

@johnnynobuddy1

5 ай бұрын

I was attacked (verbally) on a DM fb page for saying the very same thing. I showed him examples (photos) of other people's experiences besides my own. He said I was liar spreading false info. I then showed him KZread videos of people attempting to reseal this splitting....like 3 pages. He said I should remove my comments and stop lying. I believe he may have been a DM corporate mole. They do split.....constantly. I thought "glued & screwed" was what was going on with Gripfast. Old versionscare clearly a 3 piece sole. But I guess not....by this video.

Last pair of Gripfasts i had were back around 2004-05 and they had certainly taken a dip in quality compared to the 90s production. These newer ones seem to be better made than the ones i had. The ones i had were pretty uncomfortable and failed catastrophically at the last. As for the new gen , For a fashion boot I like them more than docs, but I wouldn't use them as a work boot or for any hard use.

@richardcostello360

9 ай бұрын

I thankfully had a old 90's pair as a teen in the early 00's.......my mares got the "new one's " and had no end of troubles (specifically the midsole was foam between the "screw on" sole and the bottom of the boot, which expands in the hot humidity that is Australia so it "puffed out" and that was it for them.....the 90's pair was justa slab of rubber attached to the boot)

@guyfawkesuThe1

9 ай бұрын

Looks like US military boots. I only had one pair of boots given to me for 4 years of use! Steel toe too! Still got them and the ones I got in the US Army look like these :)

so if the screws dont do anything for support will they make the boot LESS waterproof having all of those holes in the bottom of the boot?

@southernbenz2098

10 ай бұрын

Without any doubt. But you can easily combat that (no pun intended) with some sealer.

@MarkA500

9 ай бұрын

I have 2 pairs of gripfast boots. I haven’t had a problem with water and the screws.

@zakugodofwar1005

3 ай бұрын

@@MarkA500How come you bought such a terrible low quality product twice😂

@MarkA500

3 ай бұрын

@@zakugodofwar1005what? It’s a great boot. Quality is top tier

@itsiceboy2836

Ай бұрын

@@zakugodofwar1005What else would you buy?

The screws have one purpose - they make the sole less water resistant.

I was hoping you’d make this video! Very informative!

Great work again. I've got some NPS steelies with commando soles and they've taken some stick. Also Astronaut Boots too.

I had a pair of oxblood gripfast 12 eyelets in the late 90s. Oi! it was the last time I ever wore style boots. You should do an episode on Creepers.

I have this boot. And I love them. I work at a car parts warehouse and this boot couldn’t be more perfect for the job. It has definitely save my toes a couple of times. If you work in a warehouse or have a blue collar job you know your toes are always at risk. These hold my feet very well. the longest I’ve worn them with out taking them off is like 20 hours. I also drive a van to deliver parts and they’re comfortable enough to drive with over long periods of time. They’re also very stylish. I’ve gotten a few compliments about how nice they look in and outside of work. I definitely see these boots lasting me for many more years to come.

i honestly think these are a bit unacceptable those screws are the worst offender those are just holes in the bottom of the boot that goes straight into the felt how is that acceptable at all i really wish you had done more in testing that like that felt will absorb and hold water and probably get really moldy if any gets through those holes do the screws keep a water tight seal what if a screw backs out a bit what about after a year or two of heavy wear especially at the flew point does the sole loosen up and let water in

@raccoonking7566

11 ай бұрын

Agreed, but, dude, use punctuation. Toss a period or comma in there.

@smashallpots1428

11 ай бұрын

No.

@mynameisnobody211

Ай бұрын

Still a better sole than the others though so stop whining.

I love this series. I completely destroyed my boots at the end of spring and forgot to buy a new pair (sneaker weather started and I've been wearing my off-brand Converse to work). Now that rainy weather started again, I realized I am bootless so I'm looking again into getting a pair of good boots. I was trying on some Martens last Monday, but they were half a size too big, even with my socks on which made me reconsider and look into Solovair again. It might take a bit of time to get them here as no store carries them so I'll have to buy them online, but it seems it'll be worth it (and they have half sizes so I can get shoes that actually fit for a change).

I still own (and wear on occasion) 2 pair of Gripfast boots purchased in the late 90’s - love them.

It hurts my soul every time you cut in to the boots/shoes! :D I have to tell myself every time its for the science! But it still hurts... Keep up the awsome work!

Have you considered doing more skate shoes? The dunks were cool, but I'd love to see some that actual skaters wear. Lord knows we go through plenty of shoes.

@kennethchrzanowski6165

11 ай бұрын

Been wearing Etnies Faders forever. Bombproof.

@joshwood241

11 ай бұрын

@@kennethchrzanowski6165 The Joslin is darn durable too.

@Xaels

7 ай бұрын

I wear Marana and really love them

Wow thanks for fulfilling my request on your previous videos and doing this one. I really love the look of these and hope one day NPS does a hybrid and combines all of the best features from both styles. I really want the Gripfast burgundy American Brogues. They look sick! (Really cool 😂) and the bollocks! Still going to visit the factory soon one weekend 🙏🏻🙏🏻🙏🏻

I totally forgot about Gripfast! I'm loving these series of different types of combat boots! Also, I see you repping Crown The Empire and Thrice!😉😎

if you take out the screws then there will be loads of holes in the sole, best to fill the holes with something waterproof IMO, also think even with screws in they will let some water in too but that is just my opinion.

Cool. I wondered about the gripfast on the solovair video, and here's the answer. Well done!

I've been wearing Gripfast for years. Got two sets, 14 hole and 10 hole. Both are still going strong and are one of my favorite sets. I actually got a set of classic 11 hole solovair this weekend.

My experience with Gripfast over 3 different pairs (each pair a different model) is that the leather uppers hold up far better than Docs or Solovair, but the outsole on all three of my Gripfasts have split right at the ball of the foot between the treads. Something about the material they use for the outsole (and possibly the screws creating points for stress fractures) caused all of the them to split across the width of the sole in the same spot after roughly 2.5-3 years of wear.

Love the channel and loved this series. Would love to see a test such as this on AUS Chelsea boots, Redback, Blundstone, Rossi etc etc.

@reddofly

10 ай бұрын

Do some searches, he has already looked at Redbacks and Blunnies.

I had Grinders MIE which were made by same specs as Gripfast in NPS,and they were just hard, though and resistant even for snow and bad environments. So I bet these are quite the same

@Alphoric

11 ай бұрын

Although it should be called Made in Northamptonshire instead of made in England

@richardcostello360

9 ай бұрын

Grinders are what Docs used to be.....not the most comfortable but definitely bullet (and shards of glass) proof! I just wished the current generation didn't have a nasty habit of splitting along the welt

@MaharlikaAWA

4 ай бұрын

I made a review of Grinders boots on my channel. Check it out.

Man, back in the day I wanted a pair of Doc's so bad I actually saved up my measly pay and finally got a pair from Journeys, hip store in the mall. I was so stupid excited when I spent the $110 on them. After wearing them a few times, I was pissed. They were NOT comfortable at ALL. Wore them a few dozen times and said, screw these!. Will not buy another pair ever again. Just me experience. Thank you for your content. Love your channel!

I have these gripfast boots. Love them. Probably the most comfortable boot I own. I have 2 pairs of these(different color) 1 pair of solovairs. Used them almost everyday. Walking 7-8 miles a day

I have a few pairs of Dr Martens including 1 made in England and 1 pair of Solovair. Tempted by the Gripfast now but a bit disappointed by the decorative screws.

these were the boots i was looking at for work with the steel toe, gonna definitely check more of your videos in the coming months, been using timberland pros at work, and they are fine, i guess. but i still have to replace them every year, but i do want to resole the last pair i got, just super comfy but the sole is wearing crooked and no longer waterproof so. always great videos

Love that wallet design!! I hope I remember to order one after Xmas. That's gorgeous.

I had a few pairs of similar boots in mid to late 90s early 00s, they were made in England with green Getta Grip label. They had extremely stiff soles but they were best boots for rock concerts, where Docs got destroyed very easily from all the broken glass. I loved that boots, still have a pair somewhere, too uncomfortable for my old feet now though :).

@zackstewart4109

11 ай бұрын

Wow, I haven't thought of those in years. They were the real deal. ANSI rated toe caps and everything.

@richardcostello360

9 ай бұрын

I still have my Dads "Royal Mail" issue ones......those were really built for work (or in the middle of a Gothic festival littered in glass and muddy shit😂) Also had a lovely shade of dark blue that even Docs can't reproduce nowadays

@nikke8058

7 ай бұрын

Still have my 14 hole Getta Grip from the 1990s 🙂

@Xaels

7 ай бұрын

Getta Grip was the best, I had a pair

@johnnynobuddy1

5 ай бұрын

He (rose anvil) used a picture of a pair of GettaGrip in this video. It's a tipped over shot with the circular seal. I'm a fan of GG.

Ayyyyyyy I see your Thrice shirt! This tour has been amazing, I’m going to see them in LA tomorrow with my husband!

My 23 year old docs look exactly like the boots you are cutting in half in this video.

If the screws do go all the way through the sole, I'd say removing them *does* damage the boot - I mean, just try walking through a decent puddle :P

I’ve had the 14 eye version of this boot for a little less than a year now and it’s never given me any trouble. I haven’t felt the bunched up fabric under the toe, but obviously that might be something that becomes noticeable over time as the fiberboard wears in more. I haven’t had normal solovairs to compare to, but I find them much more comfortable than the made in England docs I’ve tried on in the past. The only problem I’ve run into so far is that I can’t seem to get them as tight as I’d like them to be, but I also have fairly skinny ankles so it might just be a matter of chunky boots and skinny ankles not being a great match. Do I like my boots? Yes Would I recommend them? As a casual boot yes, but if you’re looking for something to use on a job site then your money is best spent elsewhere. *note on a quality issue: there is a known issue with gripfast boots having pretty severe separation between the welt and the outsole. So far I haven’t had an issue with this, but I have seen a lot of people make complaints about their boots falling apart on them a few months into ownership. Luckily it seems NPS has been good about replacing defective boots or helping to repair them if you reach out to their customer service team.

@seamusburke3350

10 ай бұрын

I'm well and truly late to this, but I have a pair of Solovairs and had a similar problem with tightness. I wound up going through several lacing methods, and found that a style most often referred to as paratrooper or ladder (or sometimes paratrooper ladder) lacing works the best. It allows you to pull the lacing through a pair of eyelets tight, and will cinch itself to keep tight while you continue lacing. All in all, it's worked pretty well for me.

@richardcostello360

9 ай бұрын

​@seamusburke3350 I'm even later to this but there's a reason the skinheads and punks King Laced/ladder laced them......only way go tighten them

Love the review of Gripfast, try doing a brogue boot or shoe. I've been thinking about switching because of the sole.

I've been hoping for you to do a Gripfast video. I loved mine back in my punk days. always wondered about the screws. I even asked on cobbler Reddit and no one knew.

Before I watch this I'm so excited for this as I got a pair of these in oxblood!

Been looking at these solovair gripfasts for a while now as in europe its pretty difficult to find north pacific style boots. Thank you for this video!!!

@christopherskelly6492

11 ай бұрын

They aren’t Pacific Northwest boots. They are English boots.

@iradiateflu

11 ай бұрын

@@christopherskelly6492 Im so happy you told me that Kelly, it never occurred to me and probably never would without your assistance :) Just messing around, he talked about the heel counter how it is made like in pacific nw boots thats why I commented that in regards to my desired durability

I have a pair of gripfasts 14 eyes in polish black I've had for years, were mostly only occasional hiking/concert/rain boots until last year (moved to San Francisco), they now have what works out to at least a 1000 miles (3 miles a day for a year) on and countless hours of dancing on them, so far the only real failures that effect wearability are the fabric pull tab on the back of the boot got crispy from sweat and broke one morning which makes them a little annoying to pull on, and more recently they got eggs on them and they started to dry out and crack where the quarters meet the vamp, so I'm hoping to get them repaired before next rainy season. 10/10 seriously solid boots

I bought a pair of the ten eyelet commando steal toe from a thrift store when I was twenty. They have sever cracks in the leather and need to be re soled. But for a pair I got used. Wore for twenty years and still kicking. Buying a second pair for my 39th birthday. My favorite boots ever.

Got a pair of doc marten cappers that I've had for about 8 years now from the Indian factory, they've dealt with all sorts of abuse in tropical conditions down to -10°c. I use them as my daily boot and they were my riding boots on my motorbike for 3 years, all year round. Despite that they're still going strong and I reckon I have another 3-4 years left in them. So even tho those cheaper docs may not be as good as all these other fancy boots, they can still take a solid amount of punishment before they quit.

Would love you to do more uk shoes, possibly look at Alt-Berg and the Grenson G: Two (India) and G: One (made in Northampton) shoes. Also Oliver Sweeney Oxenholmes! To be honest as a former Northampton-ite would be good to know your thoughts on Loakes and Crown etc.

@chrisbolton5461

11 ай бұрын

Got some Altberg motorbike boots made to order in Yorkshire.

Finally a review on my exact boots. Love my stompers, but might swap them for an older pair of grinders sometime

@pucknhusker9426

10 ай бұрын

Grinders have almost no break in, so nice to wear after one trip around the block. Last forever always dry. Awesome boots

in Poland like a 90% of boots for rock/punk subcultures in 90s and early 2000s was Shellys Rangers Orginal Boots and HD (Heavy Duty) Boots... They're almost exactly te same as those Gripfasts, but sole was attached in different way (no visible stitch) and they had the screws too.. I had bunch of them back in a day :)

Great video! It would be cool to see some other GYW boots that you haven’t done before, Truman boot company, oak street, viberg etc.

Great video!! I love my Gripfast boots, never have felt anything regarding the bunched up fabric under the toe. And yes, they look so badass. I am currently wearing the burgundy rub 10 eye, beefy and beautiful \m/ There used to be steel toe and capped toe docs with the thicker sole but they seem to be no longer available. I definitely feel like the gripfast are a step or two above, I had several pairs of both over the years. Even the attention to detail on my gripfast seems a higher standard. Just my opinion \m/

I’ve had the horween dr martens and I’m currently using the gripfasts and the dr martens didn’t last nearly as long as my gripfasts.

Great info ! How about ripping up the Dr martens bex tech. Im interested in them, mostly for the looks. Would love to see the guts and a break down of the tech outer layer . Thanks .

I really like this series. One boot I'd love to see is the Caterpillar boots, they are red with yellow stitching and black soles I think. Had a pair years back because they meant to be good but they lasted only 3 months 😅😅

I’ve had 2 pairs of Dr Martens Iowa, which is a “work” boot of many that we in Amazon warehouses could elect from. They are waterproof and a lot more rugged than the traditional Docs which we can also choose from. Both lasted me well over a year and a half using daily.

@manwithnoname6580

6 ай бұрын

Interesting. My railway company supplies us with Doc Martens steel toe cap boots that definitely are NOT waterproof. Will the Iowa DM’s keep my feet dry when I’m outdoors in hours of persistent rain? I’d happily buy my own if they do.

@IamF3rnando

6 ай бұрын

@@manwithnoname6580 They should do the job! I live in the Pacific Northwest and I’ve delivered outdoors in very rainy conditions and even walked in flooded areas that with water going over my ankles. Thanks to the boot being 8 inches there’s almost no chance for moisture to get in. The only downfall it has is that they still are cemented like all their other boots, so after 3 years they began separating and only then did water get in the boots. But for $180 I was very impressed with how well they worked to keep my feet dry. Not to mention the comfort! Way more comfortable than the regular boots, definitely able to walk all day in them, and I have for many months at a time!

I’ve got all 3-made in England Dr Martens, Solovair, and GripFast and find all of them to be great casual wearing boots. I would love to see you check out Solovair Steel Toe Southerner boots as well as William Lennon external steel toe boots!!!! Thanks for the wonderful content!!!!

Would love to see you take a look at the NPS branded boots, especially the brogues.

Love the review and gripfast are real good boots. I have several pairs of them. 👍 Steel brand is meant to be good as well. A review would be great in those, as they are punk boots as as well. 👍

I still have a pair of OG 90’s Grip Fast Steel Toe. And they were “decent” boots. Heavy as hell and definitely sturdy. I once had a car roll over my toes and nothing happened. I also used to ride my motorcycle in them. Not the best, the tread would slip a little on ashfalt and they weren’t easy to get under the shifter. Also the leather blew out at the edge of the steel toe, now glued together. I still have them, but they need a serious resole.

@grumpyjay215

11 ай бұрын

I just watched the whole video. The 90’s version are build different! Mine the welt is stitched to a mid sole and the lug tread was glued and screwed down. I know this cuz I tore the lug sole off to see if I could diy resole them myself. I can send you pictures if you’re interested to see the construction. Hit me up.

@grumpyjay215

11 ай бұрын

So I just took a closer look at them. They have a plastic welt. And what feels to be no heel counter. You can push on it and it collapses a little. And there is a shank. Probably wood or plastic, because a heavy magnet won’t stick to it. The toe box is lined with wool like felt. I remember they barely kept your toes warm in the winter when that steel toe cap got cold.

I had the old school grip fast. I wore them three days on a construction job and the heel came off. They replaced em at the store. Boot lasted about four weeks and the leather just split apart. This was the 90s and my docs did better. I love my solos though. You nailed it with good for the pit. Another fashion boot. I know better these days. I ended up saving up and buying wesco’s for work lol

I've owned a pair of Docs for nearly 15 years now. They're steel toe work books. I've put them trough the ringer, and they're still pretty good. I do have to say that they've had minimal use these last few years.

@AtZero138

6 ай бұрын

90s era Doc's,, They made Steel Toe and Work Steel Toe boots,, Heavier grain leather, double stitching "yellow" and insurance policy from DM's covering Europe only of course.. Cheers from Huntington Beach CA 🇺🇸.. My Gripfast Boots are here in this room,, from 1994,,

I do enjoy the Doc Martin series! Would love to see a series on dress shoes, like the Coke Haans

Hello, thanks for those excellent videos. What about Solovair Astronaut ? Thanks.

would love to see a videos of all the alternative doc martin boots out there

I wore a pair of gripfasts out very fast. Took about 2 years for the leather and sole to completely fall apart, made the remaining upper leather parts into a wallet

It's not a cap toe but I'd take Jim Green 8 inch African Ranger over anything by Doc Marten or NPS (parent of Solovair and Gripfast). Plus they're currently priced at $209.

@Enrico-

11 ай бұрын

Jim Green AR8 look more like Docs but yeah anything is better than Docs/Solovair construction and material wise

Lovin these! Would love to see the hikers by solovair!

Love your channel, sir! I would love to see y'all do motorcycle boots. I question whether some of these boots are actually worthy of protecting your legs and feet in case of a crash.

I initially watched this channel because I wanted to see reviews on Thursday boots lol but here I am, back watching more content. I've honestly learned so much about boots/shoes because of this guy's content. Not sure if everyone finds it interesting but I sure do.

You should do a series on motorcycle boots. Theirs an entire industry of leather casual motorcycle boots. I've always wondered if they're actually good leather boots or just motorcycle boots made to look like leather boots. Companies like Merlin, Rev'it, Rokker

I still wear a pair of casual Dr brown slip ons I’ve had for 20+ years. My Son who is now 40, first noticed the the yellow thread. Pops he asked, are those Docs? 😏🤷‍♂️😎👍🏻😊

Bought a pair of gripfast in 2004 and still have them today. They definitely were not comfortable but i still wore them every day and walked miles in them lol

Wow, thanks, I was considering buying theese for some time.

Bought a pair of these in April this year to be my replacement for a pair of vintage 80s steel toe docs, much more attractive looking and way more durable but the old docs had way more arch support. Pretty uncomfortable, needs insoles if you need arch support! Could just be me though. I still am obsessed with them.

Ive had my Gripfasts for 23 years. Still wearing them.

I switched to the Doc style boys made by Vegetarian Shoes in England. I'd love to see a teardown!

Another commentor said it, so I'm going to scream it, "DO A SKATE SHOES SERIES! PRETTY PLEASE!" The one I'd be most interested in seeing cut is the "FP Footwear" I've really enjoyed the 2 pairs I've gotten, but they specialize in insoles so I'm curious if they cheaped out anywhere or if their shoes are as high quality as their insoles! But a lot of skate shoes claim to be more durable than the next, I'm curious to see if Weston is a fan of any particular brand's quality or finds an alternative shoe that might fit the needs of a skater! PS: Love the Thrice shirt during the AD! Fun fact, there's Thrice stickers all over the original set of "It's Always Sunny..." for the first few seasons, turns out one of the set designers was a huge fan of Thrice and put as many up as they could! The creators of the show didn't even know it was a band until later when fans started asking if they were fans, seeing the stickers on the show!

I'd be really curios to see a review of Harlow & Lloyd boots. They're Doc style boots

I wanna see Solovair’s tassel loafers, seems like they’re pretty popular as well. Wonder if it’s the same as their boots.

Thank you for covering these. My concern would be if someone has a job where a steel toe is needed, they may think this is cool and will work. It doesn’t seem like in the U.S. OSHA guidelines would agree. Mosh pit ok, work site not so much.

Love seeing the Thrice shirt!!!! 🤘

hi, i really love your videos!

IME the Gripfast boots last longer than regular MIE DMs. The last is also wider and they are generally a bit more comfortable. By the way there are more rugged boots out of the same Northampton factories. There used to be a boot called "Gladiator" that had safety rated steel toes and a heavier sole than Gripfast. I still have a pair from several years ago. They are not as comfortable as Gripfast though due to the weight. My issue with most of the Solovair boots is that many of the styles come on narrow lasts that don't work for my foot. You may already know this but there is a huge history of shoemaking in Northampton in general. Most people only know about punk fashion boots and the like but there are also men's dress shoes made in Northampton such as Cheaney, Alfred Sargent, Crockett and Jones, and Edward Green, etc.

Great review. Would you be able to review/cut open a Jordan 1 Golf shoe???? I'm curious to know about the learner and quality for these.

Mentioned it in last video of the series too. Please do Grinder's boot. They were my go to after Doc went to shit.

@pucknhusker9426

10 ай бұрын

Still are great boots. Grinders that is not docs

I love this series just like the moc toe

great vid man

Been wanting to buy a pair of these for a while, they have been out of stock in most sizes for equally long. At this point it almost feels like they don't want to sell them to me.

Heyoo, great series of videos! do you think it would be worth comparing "vegetarian shoes" airseal boots with dr martens? Ive had a few pairs and they are rather rugged and hard wearing. And they definitely have a similar style and shape.

I'm wearing my pair of these right now, it's nice to have my expensive purchase justified a year after buying them

th style and leather really remind me of my 90€ Altercore Boots. As far as i know they ownly return in europe tho. But It`d be great if you reviewed them nonetheless. A little bit of Information about Altercore. they are situated in poland and the boots are also built there. they origin from the polish shipyard industry. I have only had great experiences with my pair so far and the leather seems to be pretty decent (i`m not a pro tho). Like i said, it would be great to see you review them and to hear your opinion on them. Besides I really enjoy your videos and they’ve been really helpful regarding my choices of buying footwear. Keep up the good work, man and best regards!

You should check out STEEL boots. I've got a pair and they're a pretty neat boot. I'd love to see what's inside of them.

The steel toes are NOT safety shoes, just to be clear. I actually looked this up on their website (because I needed safety shoes and wanted to also like wearing them), and while Gripfast are considering it, they don't make safety shoes.

I’m heavily considering these for work boots, I’m in a need of new pair. My docs are done

Cool! Great Info!!

I'd love to see a bit on the Vegetarian Shoes Airseal steel-toe boots.

Can you start defining if the welt bond has a cohesive or adhesive failure? It sounds like you're saying it's cohesive, but it can be difficult to see in video. Thanks, great content!