🚗Win one of my cars raffall.com/kevin_talbot

Its crazy when you think about how far ahead this bike is compared to other rc bikes. Seriously impressive tech and build quality. No doubt one of the best rc released lately.

@EJ-74

5 ай бұрын

I have the old Ricky Carmichael dirt bike, It doesn't come anywhere close to this bike other than looks, I'd love to upgrade it with these electronics...

@mark675

5 ай бұрын

No point, just buy this one 😂​@@EJ-74

@capatainnemo

5 ай бұрын

due to the cost

@DEMONpoppy

5 ай бұрын

so far advanced over other bikes but to be honest still behaves like dogshit ... :D

@TheflyingkiwiRC

5 ай бұрын

​@@DEMONpoppy Agreed. It just looks awkward 😕

What a lovely bunch of coconuts all those upgrades are! Looks like a learning curve to figure out how to really drive it, sort of an acquired groove to be attained.

20ish years ago when the Savage first came out I built one entirely out of billet aluminum, Kevin's right! That thing weighed 31lbs and cost over $3000 to build 😂🤦 I only drove it once and then shelved it because I didn't want it to get scratched 😣 NEVER AGAIN!! Sweet video Kevin I sent this one to all my mates 👍

@EricLaermans

5 ай бұрын

Come on, drive it. Don’t shelf-queen it. Life is too short for that.

@lowslowcrawlers1304

5 ай бұрын

I've bought a few 2k aluminum savages on craigslist/offer up over the years, each one was like $350 lol

@MotoDonuts

5 ай бұрын

i did the same with a Losi Muggy, whole damn thing was aluminum and it bent something every time it crashed or it would cook a clutch because it was so heavy.

@fusion82

5 ай бұрын

Mating season

@paradiselost9946

5 ай бұрын

i spent AU600 on a thundertiger or whatever it was. another 200 or so on a decent Os engine... then once i figured them out... was hooked. bits of fibreglass for main chassis, molds for casting rubber wheels, twin front discs, tuned pipes... probably spent $10K over the years but enjoyed every minute of it! whereas these kit things with gyroscopes and bling just have no appeal to me. i prefer to rely on geometry, proper frame design, and skill... bikes are in a league of their own, the only RC vehicle that actually scales down without looking... stupid? cars never corner to "scale". planes and helis need compromises regards aero... but bikes always have to have the correct geometry or they simply dont work.

That was a serious little project. I didn't count the parts, but quite a few! As Always, May God Bless you and yours! 😇

I used to ride semipro for Team Yamaha when I was younger so I'm a little partial to the blue version, they all look great 👍🏻

WOW! That blue stuff looks awesome. I'll be upgrading mine a little by spring.

Loved the drifting and how it stays upright the whole time.

Glad to see you’re still going strong! Been awhile since I watched your video, but happy to see you’re still the same old Kev! Also nothin quite like seeing beautifully machined aluminum parts coming together on a great model!

@KevinTalbotTV

5 ай бұрын

Welcome back!

@mattyghost3409

5 ай бұрын

​​@@KevinTalbotTVI just finished the video I see you have a speed upgrade nice

@user-dk9fk3kh3n

5 ай бұрын

​@KevinTalbotTV is this even real

Your videos got me thru a very dark time back in 2022. Im forever greatful for this channel

@gussinger6939

4 ай бұрын

stay strong brother

@PerverzAkhter.

4 ай бұрын

0:43 lus

@LegendsPizzaCo

3 ай бұрын

Agreed stay strong. Life gets hard at times. Keep your head up

Love the blue! I can’t imagine (me!) reassembling that thing with all the upgrades and have it actually work!

The slides in the end of the video are so cool. These drifts are so cool and the way how it handles are so cool. Very stylish bike. I am impressed of how they made this bike.

Best part of this video: 11:59 Losis gyro freaking out 😂😂. What happens at 13:16 is downright amazing! I am in full awe about what this bike can handle 😮.

I absolutely fell in love with these the first time I saw your video Kevin. As a ex semi-pro racer whos career was cut short after a spinal cord injury at age 20 many years ago who can't ride anymore this would allow me to at least relive some memories through this RC dirt bike and rip around mimicking years past. Unfortunately life's a wreck and without airing out my life story just can't afford one anytime soon but hopeful one day can and upgrade it just as I did my real bikes. Thanks Kevin 👊

Green! Fully GPM’d out. Some vitavon too. Absolute blast! No noticeable negative going all aluminum. Haven’t broken anything yet. I beat the crap out of it too

wow! very cool! first one I've seen torn apart!! looks like a ton of fun! thanks for posting!!

Hey Kevin been watching you since you did those spark drift tire wheels video and you just continue to amaze me with all the effort you put in to these videos truly keep up all your great work and it’s crazy that you have a monster truck I remember just the cage 😂 love ya kev and so do all ur fans❤

@KevinTalbotTV

5 ай бұрын

appreciate it bro!

it’s insane how good that looks with all the mods , awesome as always kev 🔥🔥

Green one is my favorite and that's the one I got months ago. Every time I drive it puts a smile on my face! Great video, I thought it would be heavier too!

Dude how you got that thing back together was absolutely amazing!

Looks mint, as an enduro rider, these rc bikes are one the coolest toys out there. Not sure but those triple claps looks to be the wrong way round 😅

I think when you do things like this you risk accidentally removing deliberately engineered weak points that are meant to protect more expensive bits (like the metal chassis). It looks sick but a massive impact now risks bending/ripping out fixings in the chassis.

@thehatchetwarrior808

5 ай бұрын

I accidentally did that to my chinese amazon 4x4 buggy lol cracked the tub right where the lower control arms mount into the frame on the first crash after installing the parts.

@apocolypse11

5 ай бұрын

Bingo

hey kev, been watching your vids ever since I was 13, I’m now 17. I love your videos so much really.I love watching your channel even though I don’t have an rc car and never had one, I entered your raffle for the rally car and can’t wait to see who won. everyday I check to see if you have posted. Love you and your videos, thanks kev for everything!

The ProMoto is nice out of rhe box, and the Treal parts are absolutely awesome, i have been really happy with Treal parts... Awesome build Kev 💯

The amount of skill kev has with working on rc's is insane. I would have never figured out how to put that whole bike back together. It would have took me like a week to figure it out at least.

@EricLaermans

5 ай бұрын

Kevin definitely raises the bar for us hobbyists.

@KevinTalbotTV

5 ай бұрын

haha thanks bros! I'm just winging it!!

@thegrandmawarrier5159

5 ай бұрын

love the vids kev. have a nice day @@KevinTalbotTV

@propgear123

5 ай бұрын

​@@KevinTalbotTVhaha you do make me laugh acting like you have no clue but you know you stuff man. Was you a mechanic at 1 point? You know so much shit 😂😂😂👍🏼

@bra1nc417d

5 ай бұрын

Its called "editing" dude. Not like he knew exactly WTF to do. Hes not gonna make us sit there and watch as he googles to figures shit out LOL.

That's the most pimp daddy Losi MX bike in the world I'm sure looks great ❤

2 of these have survived a Talbot video, well done Losi! In fact one has survived 2 videos. Upgrades look great, maybe they affected wheely mode a bit though? Miles out of my price range, and I can’t be playing with toys at my age lol, so glad Kev got them. Great job 👍👍👍

I always love you videos Kevin! Like always you didn't outstanding job at capturing every moment of upgrading this awesome bike! Nice job Definitely need to get one of these ✌️😉

950 upgrade 😳 Thats more than it cost new 😂 Thats insane but very awesome upgrades 🔥

@EricLaermans

5 ай бұрын

It is insane. Aluminium is by no means à priori better quality than modern plastics. (It is from Losi, not tamiya.)

That looks to me like a HUGE load of work😂🤐 even a full rebuild on a x-maxx would be easyer 😅 Great vid non the less! Love it❤❤❤

WoW kev what a nice lil bike you have build there 💪🏼 I hope the 6s vid will drop soon. The weather is not good for filming at the moment. Thank you for your sacrifice 😸

Wow, I'm a machinist and to machine all those Aluminum parts and anodize them with that high quality for only $950, is a bargain of a price 😮

@EricLaermans

5 ай бұрын

A bargain? You must be kidding me.

@Leonn_.

5 ай бұрын

​@@EricLaermans haha i agree, probably a few bucks from china.

@lowslowcrawlers1304

5 ай бұрын

​@EricLaermans he must be a great machinist lol

@Ole_CornPop

5 ай бұрын

Yall really don't realize how much per hour cnc machines cost to run.

@drewbooFPV

5 ай бұрын

This guy definitely work for treal

Kevin Talbot is the kind of guy that will go out of his was to keep us entertained

Yah i love Treal. I had their servo saver and metal X-maxx servo upgrade on my old Maxx and it changed it so much.

This put such a big smile on my face. Especially the slow mo shots near the end.

This comment won’t get 1 like

@yumnaali4223

5 ай бұрын

You are right! It got 9

@topshelflifestyle01

5 ай бұрын

Dork level 1000

@draken4936

5 ай бұрын

Like farming

@kublenator

5 ай бұрын

your desperate for likes arent you?

@joelester9541

5 ай бұрын

Dislike from me 😅

Back in the late 90s or early 2000’s I remember having the Travis Pastrana RC dirtbike and that thing was so ahead of its time especially considering it was sold in big box stores and not hobby shops.

bro that rc dirt bike is sick

its just so satisfying seeing you put it back thogether

Can't wait to see those new wheels. They look crazy!

I did something similar with my Latrax Teton. So I got Aluminum Hubs,Driveshaft,Arms and Diff Cases. Planning on Shock Towers.

Love this brings me back to the RadioShack days with my Ricky Carmichael rc.

Reminds me of the Kyosho RC motorbike I had around 1990.

Cutting into every sticker pack as you opened the packages is wild 🤣

This video was sick! Such expensive upgrades but it looks soooooo good!

Those things are impressive. Very neat upgrade parts

That looks epic! Can't wait to see you do a run in the dry

Very slick. Everything about this is cool

Thats look Epic Kevin! Outstanding Work man

They are so fun!!! And you’re great! I hope you get to experience Colorado someday!

Soooo, if you go off a jump and hit the wheelie mode to initiate the rotation, then floor it with the "keep down" to bring it around, (maybe quick toggle for more than one)... Maybe... Just maybe.......... BACKFLIPS!?!? No clue but man this thing looks really amazing!

The model car is so beautiful

Best RC release of the year in my opinion, possibly ever! 💯

That mount. Jeeze! No wonder the rider looks so tense.

That looks sweet with all those upgrades

Wow it looks fantastic with that bleu

Need to see some sick whips off those jumps‼️

It’s looks sick with the alloy upgrades. Cracking video as always

Pump track session was awesome! More more more

Finally some cool upgrade. Nice good job

Looking at that rider being put on reminded me of mr garrisons mono wheel from South Park 😂 . Epic build!

@tigernorm713

5 ай бұрын

😂😂😂😂

i was thinking the whole time, when comes the big crash. I love that bike nice work!

I’d Really Like 1 Of Those! Seems Pretty Kool & I Just Found Out About Them Today 😎🏍️

These bikes are so good now... I wonder if you can do any 360s or MX tricks with them?? But the cost of that upgrade is so expensive for me. Great vid👍👍

That's 1 Gorgeous blue bike!!!

Those upgrades are epic!! Great vid!!

The upgrades on that bike look great!!! I can't wait to see the green one!!! 🤘😁

Congrats for the video. I want to gain this bike. Super funny. Yours videos are great !

Awesome job love your channel always fun and informative ❤

Very cool make a lap time list for that track and test all the RC's there!

Wow that's a lot of work! Nice performance despite the weather though

Yesss, I'm loving the promoto content! If anyone races them near you we'd love to see it 😎

Poor old martin!, he must have been terrified!😂

Would love to habe that thing in my old motocross days as a kid

ahahahaha arrrr kev I was PMSL at that bit 2:45 where the driver figure has to "take" an enormous "something" right up his back door!!! 🤣🤣🤣 Hilarious!!!🤣🤣

@dazofthemoo1531

5 ай бұрын

What.???😬 NO.! 😵😖😩 That's not funny. That's not funny at all.!😫🥵

@wesleydonnelly2141

5 ай бұрын

@@dazofthemoo1531 😂😂👍

Blue one looks amazing

It crazy how you teardown all that bike and built it again. 👍👍

I probably would have thrown that thing at the wall 20 times before I even got it apart. Lol. Looks Awesome

💚 Back when I was a kid I loved my Evil Knivel Stunt bike .. I’d have wet myself being handed that … 🤣

That bike looks absolutely awesome

love your vids kev cheers for keeping me entertained

Have to watch it again later. Like this video, much

Where I am it's 6:30am -10 plus whatever that windchill is. Everything is frozen and slicker than snot. Still have now frozen snow and that's about 5in or more in spots. Yup I'm staying in and going no where for my birthday. I'll celebrate next weekend with a ice cream cake!

Nice video kev!! Instructive!!!

Awesome video - thanks Kevin!

The blue looks so cool

they do look wicked fun!

Wow 😮 this guy has some serious knowledge and skills, great vid. Got another subscriber here

Your the best at what you do. Thank you

You have an Xmax Ultimate on your workbench!! Thats cool.

Very nice upgrade

I like the green because it reminds me of the KX 125 I had as a kid.

Built in gyro is cool. Nice job

Even though i dont have an rc car i still realy love your channel specially the way you speak, from Malaysia

Damn nice work. Pretty awesome.. i need another RC Like a kick in the butt..lol. but might have to get me one of these😂

I do like the green one but with all the blue upgrades on the blue one looks epic mate

Nice footage! Even better x-maxx ultimate on the bench 😂

😊 you really made that motorcycle RC car go real

Awesome video Kev, cant wait for my Blue Promoto to arrive. Going to give it the Treal treatment😄

Jeeeez, thats some high end upgrades :O