Great video

Great video, man! I'm going to use PVC to more permanently set up my side of the garage for woodworking this fall. I really like how you sat down and went over the different parts. Thanks, and I can't wait for the next video!

@MatthewPeechWoodworking

2 жыл бұрын

Thanks! Just don’t glue it! I’ll explain in the next video.

Hola!🖐Thanks for all the info and for pointing out some early pitfalls before you put this all together. I'm going to the next video where you have this all put together. I'm ever so close to BEGIN building my shop, I just emptied out my two car garage and dust collection is top of mind. Take care and have a good one, Adios!👊

Cool.

Hey Matthew, could you do a short video on your miter saw shroud. Thx love your videos

My PVC fits directly to my machines snug, so I cut little rings of PVC and put it inside the coupling at the machine, the pipe fits not the couplings, it's not the same with yours?

I wish you gave a better description of the parts you’re using, or part numbers. “Use this thing, you can buy it at Rockler”. What is this “thing” called? A coupler of some sorts I’m guessing but there is all kinds of different types of couplers. Anyway, thanks for the video.

Love the channel. Everythings well explained in a simple way. Just a thought.. any reason I couldnt use basic HVAC tin pipe instead of pvc. Finding the right connectors may be tough I guess

Do you have a link to the dust collector motor that you are using? Great information!

Thanks for the tips. I have the Rockler Dust Right 1 1/2 HP but I have never run solid lines. I have a small space with plans to move to a little larger area in my basement. May run solid lines then. Are you using a cyclone system to collect most of the debris before the Dust Right?

@MatthewPeechWoodworking

2 жыл бұрын

No worries! And no I’m not. You’ll see a lil better in this next video. I ran my outfeed outside of my shop into a collection bin. That way there’s no need for a bag and there’s no resistance from the bag filter.

I heat my pvc with heat gun, to make it fit!

Question my friend. I am setting up my shop FINALLY with dust collection. I got black 4in sewer and drainage corrugated tubing for free. Would that work? Or would I lose air flow?

Do you have any concerns with static build up in the lines?

@JB-tp9we

3 ай бұрын

This is also my question. What you are supposed to do is wrap a copper wire around the pipe and connect I to ground otherwise you can have a major explosion that will ruin your day! I worked for 22 years in the feed and grain industry and we NEVER used plastic pipeing for that very reason. You may get away with it or you may not..... BOOOOOM!

How did you buy your dust collection motor by its self

I’d love to dump the dust outside but pushing 1100 cfm of heated air outside in the winter is too much. Dang!

@Realism91

2 ай бұрын

I wasn't able to dump outside so I put a cyclone and instead of using a bag vented into the attic where it's naturally hot in the day, if someone horded filters they could do a drop ceiling that has filters instead of panels and vent it into their, it would help dampen sound too if it was a youtuber. Of course you'd need automatic overflow protection setup at the cyclone so you don't fill thick dust up there.