Woodworkers Mill | Portable Sawmill | LOGOSOL
Тәжірибелік нұсқаулар және стиль
Woodworkers have unique needs when it comes to milling lumber. This sawmill from Logosol gives you the capability to control your project from the raw log to the finished product.
The Woodworker's Mill is a woodworking tool capable of quartersawing, resawing, cutting curved lumber, bookmatching, cutting perfect bowl blanks and more. Plus it's fun to use!
This mill is perfect for short, fat logs, where lots of lumber can be found at a minimum price. The legs of the sawmill are closer together than the M8, making it easy to mill these shorter logs that are full of premium lumber.
This unique woodworking tool deals specifically with logs that are 1.2-2.4 m (4-8 ft) long - logs that fit easily into the back of a pick-up truck. We heard from many woodworkers they did not need a full-sized mill - but they did need a mill that would provide them the ability to produce their own unique lumber from their own logs. Logosol answered this call for a smaller mill, but one with full-sized features - The Woodworker's Mill!
With this woodworking tool you can realise your wood working plans and free your wood working projects!
Read more at: www.logosol.com
Пікірлер: 55
Discontinued model. But check out our latest models at: www.logosol.com/store/sawmills/ 👍😊
@bertjacobson9550
3 жыл бұрын
Bert here like to buy a mill
Wow! =) This is really cool! My research of historic sawmills for my steampunk novella brought me here, so this is very useful for a small family business I'm describing! Thank you!
Amazing tool.
Great video. I learned a lot.
Nice video. I was waiting for you to show us what to do when you're making your last cut and if their were any safety concerns when doing it.
Hey guys, can you tell me how the outboard end of the chainsaw is kept level all the way to the end of the cut?
I noticed as you raised the log to be cut. You said 5 clicks would give you 1/4 inch of raise per click. But my point is, The handle is wrapping a rope around a shaft. When the rope starts to over-lap, it is actually moving up more than 1/4 inch, because the diameter changes since the rope is over-lapping itself. So, it may be not be accurately repeating the 1/4 inch of rise.
@craigsmith4939
9 жыл бұрын
I dont think the click is dependent on the rope winch. The click is the dog catching the vertical gear spline.
@anitavalentine2562
9 жыл бұрын
Craig Smith
Anyone with the proper equipment can definitely to this a try, also there are quite a few neat plans you can get from Woody Hyezmar's (free) Woodworking Bible.
Can it be adjusted to cut at an angle and cut Ie weatherboards ??
When you start cutting your log, instead of squaring off the log, why don't you just establish a flat spot and then start slicing it into boards? If you didn't trim the whole log into a square, you would have wound up with some boards wider than the others. I thought the final outcome was to get as many board feet out of a log as possible. Thanks. One of these days before I die I am going to purchase a small sawmill so I can cut my own lumber for my woodworking projects.😀
i'm sure that Greg is the voice of Kermit the frog. Close you eyes and you'll see Kermit talking into the camera. Great mill though and to all the people saying get a band saw mill, it's all about available funds and transportability. This fits on a car roof rack and even with a chainsaw, its half the price of a static bandsaw mill in the UK
thanks, where do you buy equiptment?
All that beautiful "grain" when cut at 1 inch thick green will warp and split while drying.
Does anyone have a review of the Logosol Spinning Cant hook?
i want one
what cc is the saw or what model?
Good video, but that chainsaw looks like it cuts a whole lot wonky! How big is your wane?
What keeps the top board from collapsing onto the long that it is being cut away from and trapping the chainsaw?
@Nevir202
9 жыл бұрын
The wood ahead of it isn't cut yet and the wood behind can only sag so much. The only place it can fully fall is as he finishes the cut and then the piece is lose, all it could do at worst is kick the board away from you a bit.
@sethwarner2540
9 жыл бұрын
you can put a wedge in the cut after you have entered the log about 1 foot. It wont start "collapsing" till the end of the log.
How can I buy your material??
I am interested for chainsaw mill portable
I would love it, but unfortunately the cost for the hobbiest is really high. The mill plus chainsaw runs about $3000 vs. $1,600 for a portable bandsaw mill from Harbor Freight or $2,800 for the better bandsaw mill from Woodland Mills out of Canada....sigh....
@cheffy101
6 жыл бұрын
Rick Rabjohn not to forget all the chainsaw blades, bar oil and sharpening to keep that mill going.
Check on the LumberWorksForums. It is a website that is a forum for mill users, not mill makers. Get the real info there.
How much for portable chainsaw mill
What size/power of chainsaw does it take to mill hardwoods in that kind of size?
@LogosolGlobal
10 жыл бұрын
We recommend either a Husqvarna 390 XP or 395 XP.
@ddelopkwapn5985
8 жыл бұрын
+Ricky5566 Nearly blew my fucking eardrums out.
@keirasharp8142
7 жыл бұрын
*Here's How Easy It Is to Follow The DIY Smart Saw Prograaammmmm>>**woodcarvingcnc.blogspot.be** >>>*
Great music, anybody knows the band
@reedwi1963
8 жыл бұрын
+transformer889 years &years
אה מהכהה כהנה ת.
whats better, a chainsaw mill or a band saw mill?
@petergdk
10 жыл бұрын
Cutting hard wood on a chainsaw mill is a REAL pain. The chain gets really hot, leaves residue on the sword, and the sword can wander out of line. Plus - you have to sharpen the chain really often, On soft wood, i prefer the chainsaw mill.
its very over priced
For over 5 years, I invest time and cash buying wood working ebooks, programs but many of them left me more problem than solution.
@damumimat4807
9 жыл бұрын
All I want is a step-by-step wood working tutorial like the one below, hope it help: help1.info/wood-working-blueprint
@eisakhan1847
6 жыл бұрын
Damu Mimat hai
not for me at $2,000.00 If you have a welder this is a DIY
everyone of those boards was wedge-shaped, not impressed!
abadul bankar
@abadulbankar5493
7 жыл бұрын
abadul bankar
Bla, bla, bla, bla,
Найдите менее мерзкого ведущего.
It' a wood waste!
that's a peac of junk get a timberking saw mill