The effort to get stable lumber with beautiful grain is worth the sweat.

@daveboyt6810

Жыл бұрын

You bet it is! Especially when you see it come off the planer!

"...I let the woodworker figure out where the hell he want's to trim that up." Most genuine comment of the week, and a thumbs up from me.

@daveboyt6810

2 жыл бұрын

Thanks, Per!

I don't know what it is, but I think I could sit and watch these type of videos for hours, and still get enjoyment out of them, thank you for sharing your expertise.

@NorwoodsawmillsDirect

8 жыл бұрын

+Buddy Vibe Glad you're enjoying them!! www.norwoodsawmills.com/portable-sawmills

I believe this is the first Red Green video I've ever seen without him using Duct Tape. LOL Nice video. Something like this would've been mighty handy to someone like me 50 years ago. I learned it on a tractor driven buzz saw back in the 70s. Same concept, only shifted 90 degrees. Most people don't even think about the direction of the grain when buying boards. They just buy them and trust that they work as intended. Most don't even know what a Pith is without Googling it. Let alone knowing why it isn't wise to use it in certain applications. But for those who DO want to know about Quarter Sawing, this video is a great place to start. It gives the basics with a drawn out diagram of what each board will look like as it gets cut. Each log is different. Some have a straight Pith and others meander. You never really know until you cut into it. As for the purpose, Quarter Sawn wood is structurally stronger due to the direction of the grain in reference to the width/length of the board. It will withstand the elements better, too. It's a Quality thing that good Woodworkers pay attention to. Depending on its purpose, of course.

@daveboyt6810

2 жыл бұрын

Well, I don't care whether women find me handy or handsome, as long as they find me! Once you use a band saw, you'll never go back to circular sawing!

Watching the video a second time after trying it once is a real help!

Most productive 16 mins I've had at work in a long time. Excellent video and love the dogs wandering around!

@daveboyt6810

8 жыл бұрын

Thanks. My wife collects strays, but I can't complain, since she took me in!

Known about quarter sawn wood for 40 years but never seen it done. Nicely shot, edited and presented.

@brikkijim

5 жыл бұрын

most descriptions of quarter sawn are confusing. The way I put it it's the same as plain/plane cutting ( a little pun there) except you're ripping the board in half so there is only one side of the center. In essence all you are getting is parts that do not go beyond the center of log. I'm a mason and this is what I came up .

@ratbagley

3 жыл бұрын

Thinking the same thing.

This old guy cutting quarter sawn wood by himself is priceless

@daveboyt6810

Жыл бұрын

Huh, what "old guy"? This video was posted over 7 years ago, and I've never seen an old guy working around the mill!

Awesome! Very demonstration and explanation of the process. Thank you!

@daveboyt6810

4 ай бұрын

Thanks for watching and for the comment. This is just one way to do it!

What a pleasure it was to see a log sawn the right way ! Most people take the easy way and just cut through and through, that is why most of the timer we buy is twisted like a propeller! Many thanks for posting this.

@NorwoodsawmillsDirect

7 жыл бұрын

Glad you like it! :-)

@daveboyt6810

7 жыл бұрын

I take a lot of pride in getting the best out of every log. The "best of the best" goes into my own personal stash of lumber.

I have always wanted to know the difference between quarter sawn and plain sawn and cut in half. You are the first I have seen to really explain it.

@forestMog

2 жыл бұрын

Me too! Valuable information. Thank you for a straightforward demonstration.

On the last wedge instead of trying to get it leveled up, just put the cut side on the deck and make a bottom cut, then flip it 90 degrees to the other cut side and make a bottom cut. Do this flipping back and forth with bottom cuts until you are down to the "firewood" wedge.

Best sawmill video - humility comes to mind plus a 'correct', almost textbook demonstration of quarter-sawing. Brilliant!

@daveboyt6810

5 жыл бұрын

Wow, thanks, Pete-- what an honor to hear from you! I just watched your BBC video from 2015, and your recent Ukulele CWD. Good to see that you are still building & playing. If I ever travel again to Great Britain (or if you visit the U.S.), I hope we can meet in person. I just put together a Stewart McDonald uke kit with my grandson, which he is learning to play, and got a second kit that I'm using as a pattern to build one for myself out of wood off the sawmill (probably walnut with a quarter-sawn sassafras soundboard for the first one). Gotta start somewhere!

You have an awesome presence and a natural teaching demeanor. Very enjoyable to watch!!

@daveboyt6810

6 жыл бұрын

Thanks!

Very cool - this guy knows what he wants and he is using his machine to get it. He's the master of this machine and this job. Very cool.

@daveboyt6810

8 жыл бұрын

Thanks! I love running the mill!

maximum yield of high-value lumber zero waste of useable lumber and he references scrap for firewood very conscientious and smart sawyer very well done sir

@daveboyt6810

5 жыл бұрын

... and I had fun doing it!

Hey Dave ,this is Dave. Great video. Im looking for that big walnut still. Thanks for coming out to mill the cedar and letting me and Jake work with you,it was a pleasure.

@daveboyt6810

4 жыл бұрын

Hi, Dave, glad you found the video. Looking forward to working with you again soon!

Terrific demonstration of quarter sawn. My father was a wood shop teacher for nearly forty years and always admired the quarter sawn lumber. Said it is more stable then the other cuts. I personally like those flecks that show.

@daveboyt6810

6 жыл бұрын

It is more stable. Some species show more flecks than others. Oak & sycamore are beautiful. Well worth the extra effort!

We are a wood flooring refinishing and installing company,,,,you sir geve us a very valuable information, thank you very much.

@daveboyt6810

3 жыл бұрын

Quartersawn wood is less likely to cup and shrinks less with changes in humidity, so I can see why this is important to you. Keep in mind that woodworkers will pay a premium for salvaged quartersawn pine flooring!

Thnx for a simple well explained logical method. I love you wasted hardly anything and im sure most of us would gladly have the fire wood to make something from.

@daveboyt6810

3 жыл бұрын

The problem is that the wood that comes off the edges is not stable and tends to warp and bow as it dries. Still, it would be good for small projects, such as pen blanks. Not wasting wood is one of the things I love about running a band saw. On a typical log, I get an extra board or two because the thin kerf wastes about half as much wood as a circle or chain saw mill.

This is one of the greatest Videos I have ever seen. Thank you.

@daveboyt6810

5 жыл бұрын

Thanks for your kind words. The mill provides a lot of enjoyment and every log is different!

Welcome to the Red Green Show. Today we’re sawing some lumber.

@daveboyt6810

3 жыл бұрын

I keep a roll of duct tape in the toolbox!

Thanks so much for the time you took to produce such a great instructional video. Wish I had a mill.

Very informative. Thanks for posting. It really does seem like a pain as the operator said, but the beauty of 1/4 sawn wood is worth it.

@daveboyt6810

8 жыл бұрын

Just takes more time, actually. A labor of love!

Thank you for this video!!! Fellow Norwooder.

now i truly understand quarter sawed logs mean and know how to do it thank you.

Enjoyed this very much. Thanks.

I love quartered lumber. Make's beautiful flooring to.

Thank you for presenting this video. I needed some quarter sawn oak for a steam bending project. I took several logs to a local Amish sawyer two days ago. A couple were white oak and the rest black walnut. We used your process to quarter saw one of the oak logs, 3 different ways, just as you did in this video. And it worked out very well. Now I think we know what we are doing! I had taken 4 red oak logs to the same guy 2 months ago and I had asked him to quarter saw them, but he had misunderstood me (or I just communicated badly). Anyway, that didn't work out very well. So this time, I made a single page collage of pictures of you doing the various steps and it worked out very well. Thanks again, Pete Stanaitis ----------------------

@NorwoodsawmillsDirect

8 жыл бұрын

+Frenchcreekvalley .frenchcreekvalley Glad it helped!! :-)

Great video. It's a real pleasure watching some one who knows their business and is good at it taking care to do a job the right way. Well done and thanks for posting.

@NorwoodsawmillsDirect

8 жыл бұрын

Thanks Herb!

Sir, you presented yourself very well. Your explanation of how to quarter saw and get the most useable product from a large log was interesting and informative. Thanks and keep that saw blade sharp. **** 1/2

@beckyboyt8535

8 жыл бұрын

Thanks!

This is the best tutorial I've seen on how to quarter saw a log! Bravo!

@daveboyt6810

5 жыл бұрын

Thanks. Glad you enjoyed it.

@billystray7007

4 жыл бұрын

putting the lines on the log really gave a good visual

i would like to thank you for the information you gave me. You are an insperation to me as a teacher. Your descriptions were accurate and informative. Thank you for your time and for helping the next generation understand things that they may have otherwise missed.

@NorwoodsawmillsDirect

8 жыл бұрын

+Ashley Nevins we're glad you enjoyed it!

@ABBABEER

Жыл бұрын

I am thexnewest of Sawyers and have seen several attempts to explain quarrersawing. Dave has done the best most thorough explanation of any. The little add ins based on his experience are so valuable. Thanks for this presentation, I am subscribed snd ready for the next lesson.

I really appreciate how well thought out the presentations are. I’ve enjoyed them so much that I’ve watched them more than once!👍💪👌

@daveboyt6810

2 жыл бұрын

Thanks for watching & for leaving your comment. Even a bad day at the sawmill is better than a good day doing just about anything else.!

Thank You. It was very informative and I learned a lot. Dave, Buffalo, NY

So good Dave. Your explanation followed a very logical sequence. Probably the best explanation and demonstration I've seen on the subject. You are truly a subject matter expert.

@daveboyt6810

2 жыл бұрын

Hi, Howard, good to hear from you. Any expertise comes from making a bunch of mistakes, and I'm still amazed at how many ways there are to mess up a cut! Stay well, and keep making sawdust!

@howardkettner

2 жыл бұрын

@@daveboyt6810 Well put Dave. Very well put! PS - I just posted a public thanks for your support and all the learning you've provided me with along the way - in the most recent video on my channel. Least I could do out of appreciation . . . kzread.info/dash/bejne/YpZ51KWbgqa-qJc.html

So I've been milling logs (for my own use) for almost 20 years. I probably learned more in this 15 minute video than I have in those 20 years.

@daveboyt6810

5 жыл бұрын

Never stop learning! As they say, "Good judgment comes from experience, and experience comes from bad judgement". Words to live by!

@MrIndyjoe

4 жыл бұрын

@Bert Clayton as a former teacher I really like your perspective. Very insightful and sometimes it is not the subject but the way in which it is shared, discussed, and interpreted. That makes all of the difference! Thanks for sharing.

Great presentation...love the markings on the wood to indicate your plan, and you explained everything so clearly. It was an informative and RELAXING watch. Thank you! :)

@daveboyt6810

6 жыл бұрын

Thanks. Actually, I find milling lumber relaxing when the weather is good.

Thanks for making and posting this! Very informative.

@michaeltarasenkoop2389

5 жыл бұрын

Aaron Lund Avery interesting and educational

I've been cutting everything flat, just learning and getting started. I'm going to give this method a try. You explained it nicely. Thank you!

@daveboyt6810

3 жыл бұрын

Let me know how it works out! I started out with a small sawmill about like yours, but pretty soon, I needed a bigger mill to handle bigger logs. Even with the HD36, I mill logs that push the limits, but with a little determination, there's always a way. I enjoyed you channel, by the way, looking forward to watching more of your videos as time permits.

@WalnutsandWineberries

3 жыл бұрын

Thanks for checking us out, Dave! I'm really looking forward to trying out quarter-sawing. That's the fate of the next 20 inch log I get on the mill. Your sawmill is impressive and I envy some of your nice features, like the locks. I'm sure we'll go bigger and better one day. I got the sawdust in the veins now too!

That was a great explanation of how to do it right. Many thanks!

@daveboyt6810

Жыл бұрын

Thanks for watching and for leaving the comment. There are other ways to quarter saw lumber, but this is the easiest & most efficient for this type of sawmill.

Wow! Awesome.. I gotta try this on my mill! Thank you well done. Brief, to the point, well illustrated etc. Excellent!

@daveboyt6810

4 жыл бұрын

Thanks! Let me know how it works out.

Love to work the wood. Great vid.

Very useful and great video! Thanks.

@beckyboyt8535

8 жыл бұрын

Thanks. Glad you liked it!

Loved the video...great explanation you gave sir. thanks you so much....I also noticed the bucket on the saw mill....very wise man...lol BB

@daveboyt6810

3 жыл бұрын

Thanks. Yeh, we compost some of the sawdust for the garden and I get plenty of exercise without shoveling!

Another excellent tutorial!

Very well done video. Thanks for posting!!

Thank You for an informative presentation! Years of experience deserve respect! Knowledge expressed well.

@daveboyt6810

3 жыл бұрын

Thanks! I enjoyed your video on the Old Chillicothe Village. Maybe in a couple hundred years someone will dredge up this video as an example of the primitive conditions in Missouri in the early 21st century.

Great information, really well presented. Thank you!

I enjoyed, and gleaned a lot. Many thanks

Nice project , to be able to saw your own boards. I enjoyed this tutorial video, Thank you !

@NorwoodsawmillsDirect

8 жыл бұрын

+Reg Sparkes Glad you liked it!!! Thanks.

very good video. your love for wood and saw milling shines through!

@beckyboyt8535

8 жыл бұрын

Thanks. Yes, I'm fortunate to be able to do this. It is actually easier and more affordable than most people think, and I meet some amazing people along the way.

Thank you Dave. Love everything about your vid! You are amazing.

@daveboyt6810

3 жыл бұрын

Thanks! From your screen name, I'm guessing you're a metal worker. I've pounded a bit of steel, but not enough to do anything fancy. Discarded band saw blades, by the way, make great knives.

That was a really good explanation!

Norwood, Nice job with the editing to make this look simpler than it is.

@daveboyt6810

7 жыл бұрын

Thanks for the kind words. Quartersawing that log isn't that complicated, but it does help to have a plan. A lot like playing Tetris, only in reverse (taking the log apart instead of putting it together.

great job showing how to quarter saw lumber . Thanks for you U tube video !!

Thanks for that. Wish there was one of those in my area. I loved your voice. Reminds me of the Older disney movie narrators I watched when I was younger.

@NorwoodsawmillsDirect

8 жыл бұрын

+Old_Phart There are Norwoods in every corner of America. If you want to see one in action, just give us a shout at 1-800-567-0404 and we can find one very close to you. Thanks

Very nice clear demo, I've always wondered what quarter sawn really meant.

Great work as always!

Straight rockin it pop! Thanks for sharing!

@daveboyt6810

3 жыл бұрын

Thanks!

I love the look of quarterd sawn white oak. I have a dining room table made of it with an OCS Boston stain and love it. I am thinking of getting a kitchen island top in quarter sawn oak now. I will probably have an Amish furniture company make it for me. Thanks for helping to make this beautiful wood available to us consumers.

@daveboyt6810

7 жыл бұрын

One of my greatest pleasures is seeing how woodworkers use the wood that comes off my mill. I'm pleased to be a link between the log and the end product.

Nicely done thanks for the tutorial love quarter sawn wood

@daveboyt6810

5 жыл бұрын

Thanks. Sounds like you do a bit of woodworking.

Nice Mill! Would love to have one! Thanks for the share!

Totally Awesome videos! Thank you

Quarter and riff saw is the only way to go. I see now it's a lot more work, but as a woodworker for 35 years it's pretty much the only type of wood I use. Glad to see you take the time and do it right.

@daveboyt6810

8 жыл бұрын

I agree that it has a lot of advantages. Even wood like walnut that doesn't have a ray structure that stands out is beautiful when quartersawn. I cut wood they way the customer wants, but definitely recommend quartersawn.

@tomnovak7731

4 жыл бұрын

It is a lot more work if you follow this method.

@tazobepateulemernest6216

Жыл бұрын

heloy sr good morning i love the l'échine haow moch a you salling?

@tazobepateulemernest6216

Жыл бұрын

in box me place

With the limitations of the mill, this is a good presentation. Quarter sawing is best because, 1) it reduces waste from checking by cutting right through the center of the log, 2) quarter sawing also reduces cupping and twisting, because quarter sawn wood is more stable than slab sawn wood. These hobby mills can produce some quartered wood, however, they are not ideal for producing the highest quality quarter sawn wood, which comes from logs with a larger diameter than hobby mills can handle without whittling the log down. I have yet to see on KZread a mill set up, and an operator, who really knows what he is doing when attempting quarter sawing. That last piece this guy said was destined for the fireplace? No. It too is quarter sawn, that can be handled by the craftsman with his own resawing efforts. One of the points for quarter sawing to remember is, the craftsman who is going to use this wood has tools of his own for re-sawing the quarter sawn wood coming off your mill. If your mill will accomplish the task, the right way to quarter saw is to first cut the log first into four quarters. The rest is self explanatory. And finally, a log with a big sweep can also be quarter sawn, and will produce quarter sawn wood with a big sweep for a special project that requires the curve. Logs with a large bell at the big end can produce lovely wide quarter sawn wood in matched pairs. Good luck. Think about what you think about!

@daveboyt6810

Жыл бұрын

Exactly right... you use the tools available to their best advantage. In the past, I would quarter a big log with a chain saw, then quarter saw each quarter. I now have the Norwood 38MAX sawmill, which allows for a 14" depth of cut-- much better for quarter sawing larger logs. Actually, looking at the grain, the last pieces have a rift pattern, with the rings at about a 45 degree angle. I'd love to see a video of quarter sawing a log with sweep (I call 'em "banana logs"). Can't quite wrap my head around how you'd do that, other than a few quarter sawn boards out of the center.

thank you all for the diagram, just hope more would understand such

Thank you for sharing your instructive video. You explained the art with such clarity. A skill only won by deep experience.

@daveboyt6810

3 жыл бұрын

Thanks, but I'm still learning.

Beautiful educational video!! Thanks!

@NorwoodsawmillsDirect

8 жыл бұрын

+steinderbush Glad you enjoyed it! :-) www.norwoodsawmills.com/portable-sawmills

Awesome job! This is what youtube was made for.

@daveboyt6810

4 жыл бұрын

Thanks for that! Are you a sawyer or woodworker?

@MrIndyjoe

4 жыл бұрын

@@daveboyt6810 I am neither presently. We live on 6.5 acres of woods mostly oak, hickory, walnut, and maple. I want to get into woodworking as I have lots of material. Thanks for sharing.

Great video great job, thanks.

Thanks for sharing your skills and experience, I really enjoy your video. I love to work with woods. With that skills and fine machene you got, I'll be so happy. Take it easy.

@daveboyt6810

7 жыл бұрын

Lots of woodworkers are using bandsaw mills because that's the only way they can get exactly the right lumber for their projects. Next best thing is to have the wood custom cut by a sawyer who can custom cut for you.

Thank you I enjoyed your video

re: the modified cutting pattern around the 11 min mark: What I've done with my Norwood is to set the cut 5/4 off the bunks (or whatever thickness desired) and cut the board off the bottom. That way, I don't have to 1) mess with constantly try to level the small log and 2) adjust the cutting height. Thanks for the vid. Please keep it up.

@tomnovak7731

9 жыл бұрын

johnsobj That is the way I would do it too. Accuracy is greatly improved as is safety.

@johnsobj

9 жыл бұрын

Tom Novak approx 7:30 mark: Can also do each of the top/bottom pieces individually so the wider piece doesn't have as much waste. I use a scrap when securing it so I don't scar the face of the wood.

@beckyboyt8535

8 жыл бұрын

Good idea. Guess I'm just too used to pulling boards off the top. In poker, dealing off the bottom can get you shot!

@tomnovak7731

8 жыл бұрын

+Dave Boyt may be the machinist in me, but the more stable the workpiece is, the better the end product will be. Guess I'm not much of a poker player. lol. But you're probably right.

@jeffbruce6369

7 жыл бұрын

same page here!! even if a level is needed, how'z'bout a bullet level, eh??? anyway, twas a fun watch

Loved the video best one I've seen on quarter sawing Thanks keep up the good work

@daveboyt6810

5 жыл бұрын

Glad you liked it. Whether you're a sawyer or woodworker, it pays to pay attention to the grain.

Simply explained. Thank you Sir. 🇺🇸

@daveboyt6810

3 жыл бұрын

Thanks, Jerry!

Nice explanation , I really like your bucket over the sawdust chute. That will keep it off of the ground and clean in case you want to repurpose it and less cleanup too.

@daveboyt6810

8 жыл бұрын

Sawdust is collected and mixed with manure for garden compost. I don't waste much!

Real nice sawmill.

Very well explained! Looks like a fun tool.

@daveboyt6810

8 жыл бұрын

Maybe not for everyone, but I sure enjoy it!

I want to work with this guy. He seems like a wealth of information.

@daveboyt6810

8 жыл бұрын

Why not? Come on over & I'll put you to work! I'm in southwest Missouri, not hard to find.

I 𝗿𝗲𝗮𝗹𝗹𝘆 enjoyed this video. Got some good 𝙢𝙖𝙣𝙡𝙮 education, plus enjoyed seeing the use of a great tool in the portable sawmill. Been learning about Gerstner tool chests, which are made with quartersawn, and in researching the word wound up actually learning something worthwhile. Thanks very much.

@daveboyt6810

4 жыл бұрын

Glad you enjoyed it. I'll have to check out Gerstner tool chests. Always looking for new projects!

Thanks for the video! Good info!!

@daveboyt6810

7 жыл бұрын

Glad you liked it. Hope you can put the info to good use.

100% de aproveitamento, muito bom, parabéns.

@daveboyt6810

8 жыл бұрын

Obrigado!

Didn't know Red Green was making lumber too!!! Way to go Red!!!

@daveboyt6810

6 жыл бұрын

Yep, I'm definitely more handy than handsome!

Good job

great video! your explanation are easy to understand!

@daveboyt6810

8 жыл бұрын

Thanks! Any day at the sawmill is a good one.

Great demo,makes me want to go out and make some sawdust.

@daveboyt6810

8 жыл бұрын

Go for it!

Thank you!

Great video! Thanks for sharing this.

@daveboyt6810

8 жыл бұрын

My pleasure!

I really appreciate your knowledge and the quality of video you made here for us. And I hope this doesn't offend you, because I think it's a compliment, but you're a dead ringer for Mr. Red Green!

@daveboyt6810

3 жыл бұрын

Uh, thanks... I guess... I do buy duct tape by the case, but don't much care whether women find me handy or handsome, as long as they find me! I come by my Red Green ingenuity from my Dad. Growing up in the late '50s, we had two washing machines-- one would only agitate, and the other would only spin. We also had two televisions, one with picture, the other with sound.

@forestMog

2 жыл бұрын

@@daveboyt6810 You got new subscriber with this!

This a really nice outfit, has plenty of power. You do nice work and don't have much waste at all, enjoyed your video and learned a few things as well. Thank You..

@NorwoodsawmillsDirect

8 жыл бұрын

+Joseph M Thanks Joseph!! www.norwoodsawmills.com/portable-sawmills

@daveboyt6810

8 жыл бұрын

You're right on all counts. I've pushed that mill to the max and it always comes through! Never yet had a log that I couldn't mill, even if I have to quarter it with a chain saw first.

Thanks for bothering to explain simply and concisely. So many people get in the way of their message. You don't

@daveboyt6810

8 жыл бұрын

My pleasure! Hope to do more videos on down the line.

Great video i really enjoyed it.

That was very cool. Thank you Sir. I've always wondered how that was done and what exactly they meant by quarter sawing lumber

excellent demonstration, the best I've seen yet. I actually understand what you;re doing.

@daveboyt6810

7 жыл бұрын

Thanks. Took me a long time to work it all out. Helps to have the right tools.

@tomnovak7731

4 жыл бұрын

Then you're ahead of him in the game. LOL!

Thanx for the info.

Very nice Machine. Thanks for the explanation on quarter sawing. Appreciate it! Keep up the good work! Thanks.

@NorwoodsawmillsDirect

8 жыл бұрын

+Sunny One Glad you enjoyed it! www.norwoodsawmills.com/portable-sawmills

@Sheba936

8 жыл бұрын

Norwood Portable Sawmills Yes I really did! There are not a lot of Mills around today That even know how to cut and get those Beautiful Quarter Sawn Planks. Or Maybe they just want to get the most Planks they can and forget about Quarter Sawn. Thanks again!

@daveboyt6810

8 жыл бұрын

That's what I love about the Norwood mill. It has the versatility and flexibility to do this kind of cutting. There are more of these mills out there than you might think!

Great educational/instruction video.. Thanks! 👍👍👍

@daveboyt6810

4 жыл бұрын

My pleasure. Will have more posted soon!

Good video. Well done.

@daveboyt6810

4 жыл бұрын

Thanks!

Great educational vid. Thank you, from a Newbie sawmill owner. I have three Maple logs that will be quartersawn in the next few days.

@daveboyt6810

3 жыл бұрын

Congratulations on the mill... you'll love making sawdust. Quartersawn maple is pretty, but doesn't have the ray flecks like oak or sycamore. Which mill are you using?

@heavymetalcowboy5359

3 жыл бұрын

@@daveboyt6810 Frontier OS27, with a trailer under it. It cuts pretty good.