The finish came out amazing. The bowl looks great.

This was a very well done video. The bowl is great!

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thank you, Pat! 👍👍👍

Looks great...I love the Ack's paste and polish!

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks, Carol! 👍👍

Good to see new product oh nice bowl👍👍

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks, Barry! 👍👍👍

Good review Sam, I,ve been using Ack,s Wood Paste for about 2 months great stuff. I put the polish paste on and let it dry for about 10 mins. then buff off. That seems to work great.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks ,Gary! I will try that out on my next turn 👍 cheers for the tip mate 👌

Nice job sam. Looks like it dose a good job. Will have to check them out.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks Steve! Definitely check them out, it is a great product 👍👍👍

That is a beautiful bowl indeed, and the abrasive past and polishing past does a truly nice job, very shiny indeed does a great job of making your project showroom shiny. You sir, have a new subscriber.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thank you! Much appreciated 👍👍👍

Nice job Sam Looks like it dose a good job

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks, Dave! Looking forward to using it on more of my projects 👍👍

Makes it look like tigers eye stone. Really brings out grain and adds depth and shine.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thank you, Rhianna! 👍👍

it is beautiful.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks! 👍

Nice Review Sam, the bowl looked great,

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks Doug! Looking forward to trying it out on my next resin project 👍

@PohlBarnProductions

5 жыл бұрын

@@SamThomasTwistedCraftsUK if you work at it a bit longer than on at one speed and off , work at it more like YG slower speed to faster before taking it off and then put another coat on will going at the fastest speed but work at it lightly it works well on the resin, then hit it with your micro fine

@PohlBarnProductions

5 жыл бұрын

at least until Ack's gets that resin paste out and about to everyone, I gotta do a review or at least a better one for the paste and restoring paste, I think I'll follow the directions as you have on one side and then to what works for me on the other, Direction BAH Who follows the directions anyways ! LOL

@SamThomasTwistedCraftsUK

5 жыл бұрын

Lol 😂😂 yeah looking forward to trying out the resin paste especially if it cuts out all that micro mesh sanding. Gonna have a play around with it and find out work works best for me, been told about leaving the polishing paste on for around 10 minutes then taking it off gives great results so gonna give that ago 👍

I like to sand many of my projects to 3000 so if I use the abrasive paste with a grit of approx 1000 will I need to discontinue the grits higher than 1000? Depending on the type of wood and my developing skill level I may start at 60 and then move up the grit levels to 3K. Thanks for sharing. Great job on the bowl.

@SamThomasTwistedCraftsUK

4 жыл бұрын

I start my sanding at 120 and work up to 240 sometimes 400 then use the paste and restorer and apply a finish I find that works best for me. I personally wouldn't start sanding again after the paste as the whole point of it is to eliminate some of the process of sanding. trial and error is the only real way to find out I suppose 👍👍

The quality of your work is outstanding. Good for you! Do have some curiosity regarding your lathe. What is model so I can google it? The bit I've seen of it, looks like the lathe I own, but with a different badge. Also maybe like the Ackminster 1428(?). Just curious, as I've not seen many reviews. A lathe as good as mine should have gotten some notice.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Much appreciated, Barry! The lathe I have is the AT1416vs which I believe now is the AT350WL I think the lathe is brilliant couldn't say a bad word about it to be honest. Is this the one you use?

@sdad46

5 жыл бұрын

@@SamThomasTwistedCraftsUK I use a USA branded lathe, called a Colt 350. It has a one horse motor with a vfd controller. It has a movable controller and a digital speed readout. There are 3 pulleys to change speed ranges. What I have looks identical to the Axminster lathe, just with USA threads, not metric. Without seeing some good shots of your record power, all I can do is think that what you have is the same as mine. I need to see if I can find yours on the internet

@SamThomasTwistedCraftsUK

5 жыл бұрын

Sounds very similar on my workshop and channel update video I show the lathe 👍

@sdad46

5 жыл бұрын

@@SamThomasTwistedCraftsUK so, the at1416vs is my lathe!, just with the thread differences. The blind woodturner also use this lathe. Seems a shame that there isn't a stronger push in the USA market. I'm of opinion that it's the finest midi out there

@huwdavies5264

5 жыл бұрын

@@SamThomasTwistedCraftsUK I've got the AT1628vs which Iv'e had for nearly 7 months and I absolutely love it. they give excellent customer service as well. Cheers, Huw

Nice video Sam good review there are quite a few of these types of products out there on the market and it’s good to see how they all work. I’ve been using headstrong abrasive paste for a while now and that’s really good plus it’s from the uk so shipping is easy and affordable just another option you might want to try out. Drop me a message on my YT channel, IG or FB and I’ll send you a sticker for your board or grab me at Makers Central this weekend if you’re going. 👍🏻

@SamThomasTwistedCraftsUK

5 жыл бұрын

Thanks, Dave! I think I have seen the headstrong paste before, not had a chance to use it, but I will definitely try it out one day 👍 yeah for sure on the stickers, I will drop you a message 👍👌

So, guys. Right, guys. You do your female viewers a disservice by not including them. Perhaps you could use a different word when addressing your audience? Just sayin’. Otherwise, nice product review.

@SamThomasTwistedCraftsUK

5 жыл бұрын

Sorry if you thought it come across like that, when I say guys I mean it as everyone, I can see where you are coming from tho thanks 👍

@valeriehenschel1590

5 жыл бұрын

Twisted Crafts UK “folks” works ok.

@williamellis8993

5 жыл бұрын

Before I retired all the ladies I worked with in the office were fine with "guys" used as a collective term for both genders.

@valeriehenschel1590

5 жыл бұрын

William Ellis I know. When I was in an office, the term was used a lot.....by the guys. The female gender rarely used it. Think of it this way. From now on we now use the term gals, and expect it to cover the males too. Okay?

@valeriehenschel1590

5 жыл бұрын

BTW, my Acks just arrived. Can’t wait to try them.

Abrasive paste ok, polishing paste too greasy won’t wipe off , thumbs DOWN ????????

@SamThomasTwistedCraftsUK

5 жыл бұрын

Had no problem at all with either the abrasive paste or polishing paste went on easy, come off easy 👍

@chadwilliams5294

4 жыл бұрын

ronnie100393 sounds more like operator error. Used it on every project and never had a problem

Что за паста,напишите по нашему,плз