Woodturning - The Peacock Hollow Form 3.0
Тәжірибелік нұсқаулар және стиль
Woodturning - In this video I'm finally able to get the color mixing right using Deep Cast from Designer Epoxy on this beautiful hollow form. This is the nicest thing I've turned to date! Hope you enjoy the video and please share with your friends, thanks!
Get the Freshest CA glues in the market at Starbond
Use Code INLAYJIM at checkout to save 15% off on your purchase!
www.starbond.com/?rfsn=455379...
Sandpaper.ca USE CODE: inlayjim for 10% OFF
sandpaper.ca/
Designer Epoxy USE CODE: INLAYJIM for 10% off your first order.
designerepoxy.ca/
Hunter Tool Systems
American customers use this link below to get 10% off your order, use code INLAYJIM at checkout!
huntertoolsystems.com/
Canadian customers use this link below, please call Ken Rude to get your 10% discount at 1-403-830-3049
www.branchestobowls.com/hunte...
Instagram
/ spraguewoodturning
Facebook
/ spraguewoodturning
Website
www.spraguewoodturning.ca/
Email
spraguewoodturning@hotmail.com
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
American Amazon Subscribers use links below.
Drill Brush
amzn.to/2S8B66s
1 Gallon resin mixer
amzn.to/3wlP8QC
3ml Disposable Plastic Transfer Pipettes, used to transfer CA glue and pigment to work piece.
amzn.to/3qELuhL
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Starbond Adhesives
amzn.to/2Y3MtvY
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Drill Brush
amzn.to/3pj4QcS
1 Gallon Resin mixer
amzn.to/3hHE8cc
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Waterlox Finish
exotic-woods.com/products/fin...
Beall Buffing System
www.leevalley.com/en-ca/shop/...
Ellsworth Signature Bowl Gouge
www.leevalley.com/en-ca/shop/...
Typhoon Carving Burrs
www.leevalley.com/en-ca/shop/...
Sculpture Supply Carving Stones
www.sculpturesupply.com/list....
Sculpture Supply Lead Free Pewter
www.sculpturesupply.com/detai...
Oneway Manufacturing Easy Coring System
oneway.ca/index.php?route=pro...
Saltmill Mechanisms
woodchuckers.com/products/cs-...
Peppermill Mechanisms
woodchuckers.com/products/che...
R&D Bandsaw Blades
tufftooth.com/product-categor...
Oneway Vacuum Chucking System
oneway.ca/products-category/c...
Combination Skew Chisel and Gouge
www.leevalley.com/en-ca/shop/...
Soapstone Block for Inlay Materials
www.leevalley.com/en-ca/shop/...
Rikon slow speed grinder
www.leevalley.com/en-ca/shop/...
CNM grinding wheel
www.leevalley.com/en-ca/shop/...
Пікірлер: 1 800
This beautiful hollow form is sold, thanks for all you’re interest in this beauty!
@Kuro_Tsuki
Жыл бұрын
That was fast!
@imwhisper
Жыл бұрын
Dang it I'm late to the party. 😎 So glad it sold quick for you!
@greenmanjnj
Жыл бұрын
I wondered whether you were gonna keep it. 😂 And although I’m glad you got it sold and “put some money in your pocket,” like many others, I too had planned on asking. I’d have to spend some time saving my shekels anyway, but … gosh it’s gorgeous!!
@joeytena3
Жыл бұрын
I don't comment on videos but I just had to here...I was looking for something to get my mind off all the crazy in the world today and i seen this home video of someone with crappy wood making sales of no talent for thumbs and views making money from youtube. I'm sorry for my attitude but like I said the world has gone crazy and I'm tired! Well I watched and you do the most amazing job out of what I would call fire wood so I went to your video page and watched 7 more and you blew my mind and lifted my spirits. Hello, my name is Tena and I am your forever fan now as long as you post...I subscribed and will share I hope you see this!!!
@greenmanjnj
Жыл бұрын
@@joeytena3 You won’t be disappointed! Jim’s talent and artistic eye are amazing. What he creates is worth every penny of what he sells it for. Sit back and enjoy!!!
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzread.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
@SpragueWoodturning
Жыл бұрын
I don’t know about 10, but the only four that you need to know is push, pull, shear and scrap, thanks!
I find it sorta funny that I started watching Jim's videos to relax. Now they're real nail bitters. 😅 So glad Jim stuck it out with this project. Really gorgeous! 🤗
@SpragueWoodturning
Жыл бұрын
Lol, thanks 😊
Well Well Well. FINALLY. The true mark of an artist is trying new things and..despite achieving blue with no hint of gold. TWICE. Trying again. Congratulations. Beautiful
@SpragueWoodturning
Жыл бұрын
Thanks 😊
I don't have anywhere near the creativity you do and after watching many many of your videos I do not question your choices because you have not created anything that I have not absolutely loved. I just sit back and watch you work your magic 🎩
@SpragueWoodturning
Жыл бұрын
Thank you very much!
I've watched your prior peacock hollowform videos, and I was so happy that this time you managed to get just the right mix of temperature and time to make the resin combine beautifully without losing the colors completely. The final result is so stunning! This really is one of the loveliest resin pieces I've seen (from you or anyone else). Bravo!
@SpragueWoodturning
Жыл бұрын
Wonderful! Thank you very much!
@MoneeQ222
Жыл бұрын
Agreed! Same sentiment here
My dad taught me some stuff about building furniture out of wood he even made my baby cradle for my children and my son’s children I so appreciate any woodworking!!!!
@SpragueWoodturning
Жыл бұрын
Thanks 😊
gassed again with the art form and appeal of this piece. The Designer Epoxy is getting better and better.
@SpragueWoodturning
Жыл бұрын
Couldn't agree more! Thanks
Okay, that is a gorgeous peacock interpretation. I don't know if I've seen anyone get as good of a representation as that in any medium outside of straight paint. That combo with the wood makes it look almost like a weird planet in some regards, if it was a globe. I love that.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
@BeautifulDesignWithKaren
Жыл бұрын
I think Jim should have kept this one for a little while and had it on display in an art gallery with some of his other brilliant pieces he’s made. AND, entered his artwork in a Contest to win $250,000 so he can buy more: Designer Epoxy Epoxy is so expensive. I have several gallons and some smaller sized UV epoxy (haven’t tried that yet). I make home decor and jewelry ( resin and lots and lots of beads that I have made over the past 6+ years. My inventory is out of control and I need to get rid of it (sell it)!!! And, I need to sell most of it so I can start woodturning!! Designer Epoxy
That’s so much ice cream!! Went for coffee yesterday in one of those artisan places. And they had coffee tables that had been made with resin inlays. The inlays were all yellowed - and I was talking to my friends about it and it hit me just how much I’ve learned from you (and people like you!) So thank you for that! And congratulations on getting the piece more like the way you wanted it! Looks beautiful!
@SpragueWoodturning
Жыл бұрын
No matter what the epoxy eventually it yellows. This is why I tend to color my resin pieces. You don’t have theses issues when it’s colored, I bet these tables were in the sun and the epoxy didn’t have UV inhibitors in it like DE. Thanks for watching
Designer Epoxy That's the kind of work that stars in career retrospectives. Well done!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Another beautiful masterpiece by the very talented Jim Sprague.
@SpragueWoodturning
Жыл бұрын
Many thanks!
I agree that this is the best piece you've ever made. The way that the colors swirled together and the way the shape complimented the colors was magnificent. Great project all around 👍.
@SpragueWoodturning
Жыл бұрын
Thank you so much!
I figured I'd wait until the end pictures to leave a comment, but I shouldn't have because the close ups blew my mind. I can't even begin to say how awesome it turned out. It really reminds me of the glass lampshades you see on Antiques Roadshow made by Tiffany. Stunning.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
@valeriefuqua4641
Жыл бұрын
You're right, this does look like those Tiffany lamps! Lol
@SomethingQuickly
Жыл бұрын
Nice observation, you're absolutely right about the Tiffany lamps!
I'm glad you showed the rookie move, goes to show that even experienced turners slip every once in a while. Love the final hollow form!!!!
@SpragueWoodturning
Жыл бұрын
We’re human too, lol. Thanks for watching!
It seems like every week you create some even more special. Glad to see you conquered the peacock curse.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
I'm so glad that you've finally cracked the code on this! This is just the most stunningly beautiful piece I've ever seen! Thanks for another great video!
@SpragueWoodturning
Жыл бұрын
Wow, thank you!
Another really nice project Jim. It looks like seeing the earth from outer space. I like the colours. And yes, it is one of your nicest pieces so far. Take care and stay WARM.
@SpragueWoodturning
Жыл бұрын
Thanks, you too!
I actually love your editing comments “more coffee needed” Such a genuine decent guy apart from being a resin-bowl, wood-turning master! Hats off to you Jim 🫡
@SpragueWoodturning
5 ай бұрын
Thank you very much!
Jim this piece is so spectacular! It should be in a museum so that it can be enjoyed by many! Congratulations on such a beautiful creation!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
This piece is definitely in my top three!! I love how it resembles the earth from outer space!! Beautiful work Jim, 3.0 is number 1!!!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
This is where we can all appreciate your artistic vision and your determination to achieve it. Your other attempts were quite beautiful. But you kept trying for more. This one is gorgeous and beyond any expections. I may love this one best but totally loved your process of getting there the most.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Another thing I like and appreciate about your content is this. You show your mistakes. You show how to adapt and overcome the obstacles of wood turning. Great education for me.
@SpragueWoodturning
8 ай бұрын
I appreciate that! Thanks
Finally nailed that peacock color blend. Absolutely fabulous piece! Who says a piece of art cannot have a lid? It just can’t have a boring lid!
@SpragueWoodturning
7 ай бұрын
The general impression is if it has a lid, it becomes a utility item. Not in all cases though. Thanks
An absolutely stunning achievement. I'm glad you didn't give up on it. I also am grateful for the details of this epoxy adventure. I have been preparing a series of tests for just this circumstance where there needs to be a balance between deep pour and separation. I will be trying this myself.
@SpragueWoodturning
Жыл бұрын
Thank you! Cheers!
@mookinbabysealfurmittens
Жыл бұрын
Good luck!
Oooh Jim, that peacock hollow form turned brilliantly. The colours are just fabulous.
@SpragueWoodturning
Жыл бұрын
Thank you so much 😀
The coloring turned out beautiful. Almost like mother of pearl.
@SpragueWoodturning
Жыл бұрын
Thanks 😊
Jim, OMG, you found the Holy Grail in this one! All that practice paid off, and even they were gorgeous. The burl has lovely figuring. The resin is outstanding. It is purrfect!
@SpragueWoodturning
Жыл бұрын
Wow, thank you!
Absolutely beautiful Jim! I would humbly suggest you keep doing things your way. The results are always great!!
@SpragueWoodturning
Жыл бұрын
Thanks, will do!
@BeautifulDesignWithKaren
Жыл бұрын
It’s like each molecule of wood is speaking to Jim! He always, in the end, has a Masterpiece to polish and show us! Designer Epoxy
Amazing! Not only a perfect peacock hollowform, but a pretty darned good approximation of Van Gogh's Starry Night 🌃 Love it!
@SpragueWoodturning
Жыл бұрын
Thank you! Cheers!
@BeautifulDesignWithKaren
Жыл бұрын
Amen! And I agree with the “Starry Starry Night” analogy! It’s SO beautiful! What an amazing piece this is! So much time, some frustration, but you ALWAYS find a way and every piece is unique and so beautiful!
I love watching these older videos with the “be all buffing system”. 😂
@SpragueWoodturning
6 ай бұрын
Thank you very much!
You really got the peacock colors here by allowing the colors to thicken before you poured them in individually. Very beautiful!
@SpragueWoodturning
8 ай бұрын
Thank you so much!
Absolutely gorgeous! It came out beautifully!
@SpragueWoodturning
Жыл бұрын
Thank you so much!
I’m running out of adjectives to describe your expertise and that hollow form is exquisite. It was interesting when I got a catch with my first attempt at hollowing watching the cutter rotating in the hole. I decided a bigger hole would be perfectly acceptable 😂🌞
@SpragueWoodturning
Жыл бұрын
We’ve all been there, lol. Thanks for watching
Spectacular ...... The new owner will be jumping with joy.
@SpragueWoodturning
Жыл бұрын
They are! Thanks for watching!
I have no other words besides BEAUTIFUL
@SpragueWoodturning
Жыл бұрын
Thanks!
This turned out so well! I'm really glad you found the solution to getting the colors to remain distinct. I love the bold, rich colors you use in your resin, but I also find I'm very fond of the semkitransparent or translucent resin like in "Emerald Green Resin and Maple Burl." Mostly because I love the structure of the burl, and being able to see it is fascinating to me.
@SpragueWoodturning
Жыл бұрын
Got it, thanks for watching!
Congratulations, you persevered and triumphed. The colours are absolutely stunning, sometimes pearly, sometimes abalone and sometimes opalescent. A truly beautiful piece and possibly the finest gloss finish to boot. And you were like a little kid at Xmas, too eager to open your present to pay good heed but you got there in the end. Bet you've been grinning from ear to ear and why not. Well done :)
@SpragueWoodturning
Жыл бұрын
Thank you so much!
Love all the colors that designer epoxy provides. I look forward each week to be inspired
@SpragueWoodturning
Жыл бұрын
Thank you so much!
Oh my gosh… those globes are incredible! The blue swirly ones look like the earth in space and the others look kinda like planets too. Gosh it’s beautiful! ❤ designer epoxy
@SpragueWoodturning
Жыл бұрын
Yes they do, thanks!
You have apparently PERFECTED the art of casting and turning the peacock hollowform. Good job!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Congrats, Jim! The perseverance has definitely paid off to achieve such a beautiful piece. It is absolutely stunning.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
At the 26 minute mark, my vote was to preserve the blue resin lip!!! Wonderful imaginative persistence!!!
@SpragueWoodturning
Жыл бұрын
Thank you very much
Jim, this piece is even more stunning than the last one. I know I said the massive goblet was already my favorite, but now I'm changing my favorite to this beauty. If you continue to create such awesome work, I might have to do a favorite of the month. Thank you for sharing your work.
@SpragueWoodturning
Жыл бұрын
Wow, thank you!
Looks great!
@SpragueWoodturning
Жыл бұрын
Thanks!
Running out of words to express how beautiful your work is truly a very talented artist
@SpragueWoodturning
Жыл бұрын
Thank you so much 😀
Oh my! Jim you cracked it this time, spectacular piece and yes keeping the rim of epoxy was the right decision. Now you can mix the colours like this, I would love to see a tall vase in living flame colours.
@SpragueWoodturning
23 күн бұрын
There will be a flame type of project coming up at some point. Thank you so much!
I have one word the cover this beautiful piece of art “WOW”
@SpragueWoodturning
7 ай бұрын
Thanks so much!
Wow! Wow, wow, wow! It is GORGEOUS! And I’m all out of superlatives. Very pleased that you’re happy with it too, which is probably the most important thing. I’ve finally been caught by Covid, 😩and I’ve felt like a sack of smashed crabs all week, you creating this vase so successfully made me smile, that’s a win, thank you. 🙂🌸
@SpragueWoodturning
Жыл бұрын
Get well soon, thanks!
@joallawestervelt6918
Жыл бұрын
I had covid induced sepsis to start with. Spent over a month in a facility after hospital. Nearly died but finally got to go home. No covid but suffering what will be months of healing from covid brain fog. I hope you heal rapidly with no after affects. It is horrible to have holes in your memory.
You did it! the swirling of the glazes is an absolute masterpiece.
@SpragueWoodturning
Жыл бұрын
Thank you very much
Your doing a great job on those vases. I watch you when ever I can and if I see your show then I will watch.
@SpragueWoodturning
6 ай бұрын
Thank you very much!
You finally nailed it, the colors are just right, that's peacock all right. Congratulations!
@SpragueWoodturning
Жыл бұрын
Thank you very much
FINALLY!!!....Great job...wifey just loves it.
@SpragueWoodturning
Жыл бұрын
Thank you very much
Perseverance is the winner. Such a pleasure to watch you create a master piece. Keep on going..
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Oh My Goodness Gracious that is a BEAUTIFUL piece! I love it and wish I was rich enough to be able to buy it ... whoever does buy it is going to be so happy to get it I'm sure... love it
@SpragueWoodturning
Жыл бұрын
Thank you so much!
Peacock Hollow Form 3.0 for the win! Great job, Jim!
The hollow form is so beautiful. Your timing on the resins setup worked beautifully. All the colors show up so well. I'd give my eye teeth to be able to afford this.
@SpragueWoodturning
Жыл бұрын
I wonder how much there worth on the open market, hahahah. Thanks for watching!
@greenmanjnj
Жыл бұрын
Me too!! (to giving my eye teeth!)
Your program is so soothing and tranquil yet excitement to see the end. Your voice is calm and laid back.
@SpragueWoodturning
8 ай бұрын
Thank you very much!
Beautifully, absolutely Beautifully
@SpragueWoodturning
Жыл бұрын
Thank you! Cheers!
Third time is the charm. Just beautiful!
@SpragueWoodturning
Жыл бұрын
Thanks 😊
Congratulations on getting what you wanted. A long haul. Looks fantastic
@SpragueWoodturning
Жыл бұрын
Thanks for watching
Ok... Jim... it is time to put together a greatest hits album. I am going backwards through your art right now, but I have seen so much of the first episodes. When you first started with epoxy until now is such a great journey to follow. Thank you for showing the good with the mistakes. It is so important for young turners. Keep up the amazing work.
@SpragueWoodturning
Жыл бұрын
Awesome! Thanks for watching!
You're really getting the resin to mix right down pat. I have often been disappointed that the colors on earlier projects blended so much, but now you got them curing up before they blend and it is looking so good!
@SpragueWoodturning
Жыл бұрын
Thank you! Cheers!
Well Jim all I can say is that hollow form turned out spectacular, the colours were amazing. well done, you should be very pleased with yourself.
@SpragueWoodturning
Жыл бұрын
Thank you! Cheers!
Jim, I agree. BEST EVER EPOXY. I had to watch twice and take notes.
@SpragueWoodturning
Жыл бұрын
Thank you very much
This is the most beautiful resin piece I have ever seen. It's just absolutely gorgeous!
@SpragueWoodturning
Жыл бұрын
Thanks so much 😊
@BeautifulDesignWithKaren
Жыл бұрын
I totally agree!!!!!! This piece “The Peacock” is the most Beautiful Epoxy piece I have ever seen. This is Top Drawer, Jim!
@BeautifulDesignWithKaren
Жыл бұрын
I love seeing the works of art slowly turning afterwards so we can see every single piece of it. Wow, Jim…just WOW! You really need to have someone who is in Canada find out about Art Galleries and Art Contest-type events you can participate in with a bunch of your pieces. The Peacock would kick donkey in ANY contest event! 🎉 Designer Epoxy
Oh. WOW! What a show stopper of a piece!
@SpragueWoodturning
Жыл бұрын
Thanks 😊
So glad you persevered with this peacock design Jim and worked through the problems, I’m not surprised it sold so quickly, well done
@SpragueWoodturning
Жыл бұрын
Thanks again!
So far, every piece I have watched you make, you have always said that it is the best one that you have done, by far. They are all really beautiful.
@SpragueWoodturning
7 ай бұрын
Thanks very much!
I love how this bowel turned out. The color separation is amazing. Keep up the good work.
@SpragueWoodturning
Жыл бұрын
Thank you so much!
This one is absolutely stunning. So glad you figured out the heat and timing.
@SpragueWoodturning
Жыл бұрын
Thank you! 😊
Coming from a personal perspective your work is absolutely beautiful and incredible. Your an artist and that’s where you’re coming from. 👍🥰
@SpragueWoodturning
Жыл бұрын
Appreciate that, thanks!
@BeautifulDesignWithKaren
Жыл бұрын
There is nothing better than making a living doing exactly what you love to do. Jim puts everything into his pieces. I’m obsessed with learning woodturning. I’m going to buy myself a lathe for my Birthday! Designer Epoxy
Absolutely beautiful ! Shout out to my fellow Ontario Canada 🇨🇦 friend
@SpragueWoodturning
Жыл бұрын
Thanks for watching 🇨🇦🇨🇦
Jim you have done some amazing work in the past but you really outdid yourself here. Simply beautiful!!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Wow, the subtle hints of the purple are awesome! And my wife was speaking loudly at the television when you started mixing😂
@SpragueWoodturning
Жыл бұрын
I could hear her, lol. Thanks for watching
All of your pieces ARE that nice …. but this is special, I agree. Just WOW!! Thanks so much for letting us watch your amazing creativity and talent in action.
@SpragueWoodturning
Жыл бұрын
Thank you so much!
I thought it was beautiful before you lit it up. With the light in it, it's ultra beautiful!! Great job. I love it!!
@SpragueWoodturning
Жыл бұрын
Thank you so much!
That shape is AMAZING! The colors are STUNNING! AWESOME job!!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Woweeee...Another very beautiful accomplished piece. Always look forward to Fridays!
@SpragueWoodturning
Жыл бұрын
Thank you very much!
This really did turn out spectacular. My favorite part of this is the shape and I'm so glad you left the resin rim. The colors are so perfect!
@SpragueWoodturning
Жыл бұрын
Thank you so much!
Amazing. So glad you kept revisiting this theme until you nailed it. So, so worth it. I hope I get to see more evolutions like this on your channel
@SpragueWoodturning
5 ай бұрын
Glad you enjoyed it! Thanks!
Ive watched both video versions of this one now...I agree, this one is in your top masterpiece list! Absolutely GORGEOUS! When my time comes, I'll be buying one of your peacock creations! Stunning!!
@SpragueWoodturning
23 күн бұрын
Thanks again!
NAILED IT!!! Perfect execution Jim - not only in the mix/cure/swirl ratio, but the overall form of the piece. I was very happy you left the epoxy ring - that really was the icing on the cake!
@SpragueWoodturning
Жыл бұрын
Thanks again!
Hi Jim we realy injoy watching you doing your turning. David & Maria
@SpragueWoodturning
Жыл бұрын
Glad you like them! Thanks for watching
I'm glad you left the resin for the opening of the hollow form. The piece reminds me of a concept fantasy/Syfy planet, the water on one side and the land mass on the other. Definitely your best resin casting and beautiful peacock feather look 🥰
@SpragueWoodturning
Жыл бұрын
Thank you very much
You are absolutely correct this is the nicest thing you've turned to date. Glad you kept the resin rim. If I ever win on the lottery I will definitely buy something like this from you, lol!
@SpragueWoodturning
Жыл бұрын
Thanks!
Yep, probably your best piece. Love it. Beautifully turned too.
@SpragueWoodturning
Жыл бұрын
Thank you very much!
I have this vision of you making a string of these from large to small, to suspend off the ceiling with lights in each, your peacock finish and the black walnut shells/maybe some burl too?? Or each globe an incorporation with each of your previous best hits, with that lovely peacock blend. Too busy? Too expensive? That'd be a series piece for sure. Holy smokes is that beautiful. Thanks Jim
@SpragueWoodturning
Жыл бұрын
That would be cool. Thanks for watching
That piece is absolutely spectacular. I'd be hard-pressed to let go of it.
@SpragueWoodturning
Жыл бұрын
It wasn’t easy. Thanks for watching!
You stuck the landing. Dang that’s beautiful. Thank you as always. Designer epoxy.
@SpragueWoodturning
Жыл бұрын
Thank you very much
Jim .... it is like a Ming dynasty vase. FANTASTIQUE !!
@SpragueWoodturning
Жыл бұрын
Thank you very much
I love your channel. I love this version of the peacock form, I think you hit the nail on the head with the temperature and mixture. I hope you keep producing them. I love to watch your process and experimentation. It truly is artwork.
@SpragueWoodturning
Жыл бұрын
Thank you so much!
Jim, wanted to thank you for the discount at Hunter Tools. I placed an order for Over $300 yesterday so that 10% from you here was much appreciated. Love your videos.
@SpragueWoodturning
Жыл бұрын
Awesome! Your going to love them. Thanks
@haidergildred2621
Жыл бұрын
@@SpragueWoodturning just got them today Jim! Wicked fast shipment and yes I’m very happy they are well balanced and just feel right will give them a go this weekend 😎
Designer Epoxy I really liked the way you pranced around like a Peacock……and you should be proud……it’s Magnificent 😊
@SpragueWoodturning
Жыл бұрын
Lol. Thanks for watching
Just wanted to let you know I was totally captivated through the whole process and as far as you said you didn’t want it to look like a urn I would be proud to house myself in it 🥰🤭. Hugs 🤗 and love ❤️ coming your way 😊
@SpragueWoodturning
Жыл бұрын
Lol, thanks! I really appreciate it!
Do enjoy your work. There's so much difference in the styles of the artists doing the work
@SpragueWoodturning
Жыл бұрын
Agreed, thanks!
Try try again….. and look at the amazing piece you created!🤩
@SpragueWoodturning
Жыл бұрын
Thank you so much 😀
Designer Epoxy Jim, your work is paying off!! Congrats
@SpragueWoodturning
Жыл бұрын
Thank you very much!
Wow, what a beautiful piece, you nailed the peacock effect on this one. Like the saying goes... third times a charm
@SpragueWoodturning
Жыл бұрын
Agreed, thanks!
Out of the 3 this one is the most beautiful
@SpragueWoodturning
6 ай бұрын
Thank you very much!