Woodturning Inside Out 3 Stave Art Flame
Тәжірибелік нұсқаулар және стиль
www.AsWoodTurns.com
I had not completed a triple inside out turning for quite a while. So, after seeing Dale Dallon demonstrate an inside out flame, I had to jump back into it and incorporate the refinements I saw in his process.
Some of the refinements include:
- using CA glue dots to hold the first set of staves together
- using strapping tape for security
- cutting a groove for alignment when reversing
- rationalizing the wood preparation based on American Woodturner February 2010
Some facts:
- Board thickness(y) divided by 1.732 or thickness times 0.577 = distance to first cut(x).
- For a given board thickness(y), board width of 7 times x plus 2 saw kerfs is needed where x is the distance to the first cut.
- Subsequent cuts are 2x or y divided by 0.866 or y multiplied by 1.155
- A digital angle gauge is a great tool to set blade tilt.
Enjoy!
Blog: www.AsWoodTurns.com
FB: / aswoodturns
Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.
Пікірлер: 91
The best of art wood work, congratulation.
@AsWoodTurns
5 жыл бұрын
Thank you Krishna for watching and commenting. Alan
Very interesting. I’ve never seen a three stave inside-out piece before. Thanks for sharing.
@AsWoodTurns
4 жыл бұрын
Well, now you have - universe expanded! Alan
I'm brand new to turning so it will be a while before I tackle something like this but saving it for something to aspire to. Absolutely beautiful.
@AsWoodTurns
5 жыл бұрын
Keep it in mind and keep turning. You'll get there. Alan
A lovely result showing some masterful turning Alan. Great video. Cheers Mike
@AsWoodTurns
5 жыл бұрын
Thank you Mike - You're gracious. Alan
Wonderful! Nicely done and presented.
@AsWoodTurns
5 жыл бұрын
Thank you Cip. Thanks for commenting. Alan
Excellent video and project. Once I have access to an appropriate saw, it's on my list!
@AsWoodTurns
5 жыл бұрын
Well, sawing for this one is critical and must be safely done. Thanks for commenting. Alan
Beautiful piece of art 👍🏼
@AsWoodTurns
5 жыл бұрын
Thank you Tomas Alan
Simply beautiful. Loved the comments. Levis Canada
@AsWoodTurns
5 жыл бұрын
Thanks for watching and your comment. Alan
Que trabalho maravilhoso! Parabéns.
@AsWoodTurns
4 жыл бұрын
Thank you Aldo Merry Christmas Alan
That's awesome thanks. I've been turning some dip pens which are partly 3 sided (using 3 colours of wood) and other dip pens which are round with an inside out section. The three sided inside out idea occured to me, which led me here. The flame looks amazing, so today I'll be attempting a pen with a flame in the grip (bulge in the dip pen). 16mm is the maximum diameter, so got the dread feeling already. It's amazing when I get a crazy idea how often I end up here. Thanks for sharing your knowledge.
@AsWoodTurns
2 жыл бұрын
As long as you are safe - go for it - it is only wood. Alan
Amazing work!
@AsWoodTurns
5 жыл бұрын
Thanks for watching Matt, Alan
wow this was so satisfying
@AsWoodTurns
5 жыл бұрын
Thanks for watching Alan
Like the method Alan,even i understood it! Great result!😁😁😁😁👍👍👍👍👍👍👍👍👍👍👍
@AsWoodTurns
5 жыл бұрын
Super - I guess it really is best when understood. :) Alan
Great Christmas idea!
@AsWoodTurns
5 жыл бұрын
Shhh! - It's not time yet for the Christmas Ornament Challenge. Alan
That is amazing! Kudos to you sir
@AsWoodTurns
5 жыл бұрын
Thank you Abdelrahman Alan
@mrviometal4948
3 жыл бұрын
@Julien Ali yeah you are right no one cares. why would you hack your friend's account you psycho !!
I prefer triple stave inside/outside turning too. This is a very nice piece. I will have to try one of these.
@AsWoodTurns
5 жыл бұрын
Give it a try but be careful in the sawing. Alan
Beautiful!
@AsWoodTurns
4 жыл бұрын
Thank you Diana Alan
Really nice. Contrast with the flame is right on.
@AsWoodTurns
5 жыл бұрын
Thank you William for watching and commenting. Alan
Nice turn, Allan. I like the three sides apposed to four.
@AsWoodTurns
5 жыл бұрын
Agree - three has quite an appeal. Thank you Lee Alan
How pretty, I must try that.
@AsWoodTurns
Жыл бұрын
Please do! Alan
Very nice process for a 3 sided Io turning. I use 3 hex shaped pieces but I'll be trying this method...less wood! Thanks, Jim Jakosh
@AsWoodTurns
3 жыл бұрын
I had not thought of hex. but yes that is probably more wood. Alan
Great job.
@AsWoodTurns
4 жыл бұрын
Thank you George Merry Christmas Alan
Very educating! I’ll have a watch on your channel
@AsWoodTurns
3 жыл бұрын
Welcome. Alan
Thanks for sharing, beautiful Piece. Full View and Like
@AsWoodTurns
3 жыл бұрын
Thank you Allen Alan
Good job friend
@AsWoodTurns
2 жыл бұрын
Thank you. Alan
Very nice. 👍
@AsWoodTurns
5 жыл бұрын
Thank you Rex Alan
You are wicked good !
@AsWoodTurns
4 жыл бұрын
Thank you Merry Christmas Alan
Very nice.
@AsWoodTurns
5 жыл бұрын
Thank you Steven Alan
I hope that some day I get a lathe machine, that was beautiful work
@AsWoodTurns
2 жыл бұрын
Do not wait too long. :) Alan
That's an awesome job! It's my first time seeing this technique. I'm liking this!
@AsWoodTurns
5 жыл бұрын
I'm betting it will not be the last time. Keep watching. Thank you Alan
saya suka karya anda.....
@AsWoodTurns
4 жыл бұрын
? Translate did not work. Alan
Wonderful! Have not seen a 3 stave inside out before. New finial design, perhaps? Thanks for sharing his styling.
@AsWoodTurns
5 жыл бұрын
It would be a rather large finial but possible. Thanks for watching. Alan
Dang, first inside out I've seen. What a cool idea. Beautiful work.
@AsWoodTurns
5 жыл бұрын
Thank you Suzette. They are a great project. Alan
I have done several 4 stave inside out turnings but never thought about 3 stave. Yours is great. Love the flame inside. great color work It looks realistic. Now that you have done a 3 stave, what about two? Thanks for sharing.
@AsWoodTurns
5 жыл бұрын
Two staves seem pretty chunky - I'd have to work on that to get them to look good. But, very possible. Alan
First time seeing this. I’ve never done one of these but would love to try one sometime soon. Any suggestions on how to get started would be very appreciated.
@AsWoodTurns
3 жыл бұрын
Try it. but first do a search for my other inside-out videos. Alan
Well done Alan, I will have make some, they would be great candidates for some surface embellishments (a la Steven Kennard). Or maybe some pyrography, or maybe both?
@AsWoodTurns
5 жыл бұрын
Send me some pictures Bert. Great ideas. Alan
FYI, if you dye from dark to light and sand back between colors, it generally looks better.
@AsWoodTurns
5 жыл бұрын
I guess it depends on how much you sand back - Worth experimenting with. Alan
A masterclass .......
@AsWoodTurns
5 жыл бұрын
Thank you Steven Alan
Nice piece! I think I'll try to make one of these. Save your fingers! Use a dry sponge between your hand and the sandpaper. Should the paper slip or grab there's a layer of protection for your fingers. The sponge is stiff and gives the same support to the sandpaper as your fingers while protecting your hand. Hope this helps.
@AsWoodTurns
4 жыл бұрын
Thanks for your suggestion. Alan Stratton
@terrrywilliams3617
3 жыл бұрын
Good idea!
Hi Alan. At the first glue up, did you ONLY use the tape around the bundle and CA glue on each end? The reason for the question is I have seen others use paper between the staves so it would release easy after first cutting.
@AsWoodTurns
5 жыл бұрын
On previous inside out projects I have used paper joints. I've also used band clamps around the bundle. In Dale's demo, he used this process and I decided to try it and see if it would work for me. It did. I think paper joints are more secure but this was adequate. Thank you Ed Alan
I really liked 3 stave turning, but I didn't go to far in the schoolhouse and I'm having trouble with the math part, is there a easy way to do this. Thank you.
@AsWoodTurns
5 жыл бұрын
Don't let math stop you. Just cut 60 degrees staves and give it a try. It will come Alan
@garymccoy2888
4 жыл бұрын
As Wood Turns ..I am having the same problem. Do you have any footage of actually cutting the staves?
Buffing projects with a lot of air? I use horse hair shoe brushes. Does a great job for me. Thanks for the video. I'm glad you put it on the tube.
@AsWoodTurns
2 жыл бұрын
Great tip! Robert Alan
6:48 how is the gouge not going into the cavity and break the thin wood?
@AsWoodTurns
7 ай бұрын
1. Very light pressure 2. Shear cut with edge nearly vertical to wood rotation. Alan
😲👍👍👍👍👍👍👍
@AsWoodTurns
3 жыл бұрын
Thank you Mike Alan