Wow the hidden bark really sets this piece off and gives it lots of character. Beauty job.

Very beautiful platter. I love the way the wood grain looks. You did a fantastic job.

Beautiful work my friend. Great craftsmanship

That bark inclusion looks fantastic. Gives the piece so much more character. Nice work Jack..!

@JackMackWoodturning

2 жыл бұрын

Thanks a lot, appreciate it! 😊👍🏻

Lovely piece of wood! Lovely platter! Nice one!

@JackMackWoodturning

2 жыл бұрын

Nice one Steph. Glad you enjoyed it. Thanks for watching 😁👍🏻

Wow! Amazing start to finish!!

@JackMackWoodturning

2 жыл бұрын

Nice one Val. Thanks for watching 😉👍🏻

Absolutely gorgeous another great bark inclusion!! So unique.

@JackMackWoodturning

2 жыл бұрын

Cheers for watching Tracy, glad you enjoyed it 😊👍🏻

That is extremely pretty!! Well done! 😁😍

@JackMackWoodturning

2 жыл бұрын

Thanks T. Much appreciated 😊👌🏻

Just lovely, it is like a living thing, always exciting when you apply the polish! 👏👏

@JackMackWoodturning

2 жыл бұрын

Thanks Kev. The finish is usually the most satisfying part of the process 😁👍🏻

Beautiful Platter, love the inclusion, thanks for sharing

@JackMackWoodturning

3 жыл бұрын

Thanks Grahame, glad you like it

Keep on turning

@JackMackWoodturning

3 жыл бұрын

😊👍🏻

Very beautiful and the bark adds so much drama. Love the finish, too!

Beech is such a fantastic wood, and the bark inclusion only adds to its beauty. Well done!

@JackMackWoodturning

3 жыл бұрын

Cheers Lisa. I appreciate you watching 😊👍🏻

Beautiful platter, Jack!

@JackMackWoodturning

3 жыл бұрын

Cheers Rick

Simply elegant and so beautiful.

@JackMackWoodturning

3 жыл бұрын

Thanks Judeth, glad you enjoyed it 😊

very nice job thank you for sharing

@JackMackWoodturning

2 жыл бұрын

No probs M. Thanks for watching 😊👍🏻

Stunning platter Jack, that bark inclusions gives it so much character and it looks awesome to me. Great finish to that great shaped piece. Keep on turning. Cheers, Bluey 👍

@JackMackWoodturning

3 жыл бұрын

Cheers bluey 🤙🏻

Gorgeous!

@JackMackWoodturning

3 жыл бұрын

Cheers David, thanks for following along

Nice work!!

@JackMackWoodturning

2 жыл бұрын

Thanks Gerald. Glad you liked it buddy 👍🏻😁

Excellente idée et bien réalisé bravo 👏👍

Wow, the bark inclusion added so much beauty to this platter. What a wonderful piece.

@JackMackWoodturning

3 жыл бұрын

Thanks jean, that were a few moment I thought the bark inclusion may have caused it to give way.. glad I had a finished piece for this video, unlike my last 😂

it came out really beautiful

@JackMackWoodturning

3 жыл бұрын

Thanks for watching Joyce 👍🏻

Wow, lovely piece. Bark inclusion, Spalting, wicked grain, only thing missing is Burl. Thanks for sharing.

@JackMackWoodturning

3 жыл бұрын

Thanks. It was a beautiful piece of wood. 😊

@kishvarkhan9867

3 жыл бұрын

@@JackMackWoodturning q

Just beautiful. 😊

@JackMackWoodturning

3 жыл бұрын

Thanks you. Cheers for following along 👍🏻

very beautiful

@JackMackWoodturning

3 жыл бұрын

Thank you 😊

Very good you made a work of art!!!

@JackMackWoodturning

2 жыл бұрын

Thanks Mimì. Glad you enjoyed it. 😉😉☺️

Beautiful 🤩

@JackMackWoodturning

3 жыл бұрын

Thank you. Thanks for following along

Absolutely beautiful nice job

@JackMackWoodturning

3 жыл бұрын

Cheers Tony Thanks for watching 😊👍🏻

Beautiful work and nice finishing

@JackMackWoodturning

3 жыл бұрын

Thank you 😊

That turned out amazingly beautiful! The design and the wood grain compliment really well with each other.

@JackMackWoodturning

3 жыл бұрын

Thank you. 🤙🏻

@gurucharandewri8607

2 жыл бұрын

@@JackMackWoodturning t

Beautiful

@JackMackWoodturning

3 жыл бұрын

thank you 😊

Fabulous platter Jack, you sure did remove some wood in the process. The finish looks fantastic, stay safe, John

@JackMackWoodturning

3 жыл бұрын

Cheers John, yeah I really did, I knew that lovely figure was in the wood somewhere, the challenge was to work out which face to make the top and how deep to go. Hopefully I captured it well. It always interests me how many different outcomes a single piece of wood could have depending of how you turn it. I guess that’s why this never gets boring.

@sidneimagalhaesfagundes4578

3 жыл бұрын

@@JackMackWoodturning tigiigit

That ended up surprisingly well. I think I like it.

@JackMackWoodturning

3 жыл бұрын

Thanks 😊

Cool project.

@JackMackWoodturning

3 жыл бұрын

Cheers Clayton

Nice piece

@JackMackWoodturning

3 жыл бұрын

Thank you 🙏🏻

Bravo!! Très joli!

Came out beautifully. I wonder what causes there to be inner layers of bark preserved within the younger layers.

@JackMackWoodturning

2 жыл бұрын

Il tell you in person some time 😊👍🏻

Great stuff! For some reason, I've never seen any of your videos suggested to me before. You've got yourself a new sub!

@JackMackWoodturning

3 жыл бұрын

Hey.. thanks for the sub. It’s great to have you following along. I really appreciate you watching 👍🏻

Nice 👍 work beautiful piece

@JackMackWoodturning

3 жыл бұрын

Thank you

Amazing job. Beautiful piece 😊😊

@JackMackWoodturning

3 жыл бұрын

Thanks 😊

你进步的很快

Nice looking platter. One safety thing I would like to mention is I have been taught is that using steel wool on a spinning lathe can be very dangerous. If the wool string were to catch on the spinning wood or lathe parts it could cause serious injury to the woodturners hand.

@JackMackWoodturning

3 жыл бұрын

That is a very good point but you are missing the really important detail. Using wire wool is safe on turnings but it’s very dangerous to wrap it around your fingers to get a firm hold. Anything you hold to a spinning workpiece should be held with a gentle grip free from tangling with your hands. Thanks for your input. And thanks for following along 👍🏻

@patrickmoran2489

3 жыл бұрын

@@JackMackWoodturning Jack, I am aware of that and hopefully other turners now are also. Thank you for spelling it out .

Beautiful.

@JackMackWoodturning

3 жыл бұрын

Thank you. Cheers for watching 😊😊

It’s beautiful. Even thought I don’t like the shavings in the inclusion, you do it’s your piece.

@jam2190

3 жыл бұрын

I've done this, before, and it is hard to tell. Can't really see shavings

@nathangagnon701

3 жыл бұрын

@@jam2190 I’m just partial to using epoxy. To each his own. It’s still beautiful.

@jam2190

3 жыл бұрын

@@nathangagnon701 yup,

Awesome job, very beautiful. What were you using on the bottom to chisel off the nub (11:48 time of video).

@JackMackWoodturning

2 жыл бұрын

Thanks dee, that was a power chisel, easy to find with a quick Google search. 😊👍🏻

I need to work on my polishing routine, that thing is gleaming. Beautiful work as always.

@JackMackWoodturning

3 жыл бұрын

Thanks Jed.. If you want to have a finish like this make sure you sand properly from what ever grit you need to start with through to 600, then finish with fine wire wool at a moderately high speed, then seal (shellac) cut back with wire Wool again (low speed) then top with a paste wax or danish oil.. 👌🏻

Make another and put them together and you can make Saturn ,well almost.just Beautiful tks

@JackMackWoodturning

3 жыл бұрын

😆 thanks 👍🏻

I would have liked it if you had used epoxy, but I think what you did was absolutely gorgeous 💜💜💜💜💜💜💜💜💜💜💜💜

@JackMackWoodturning

3 жыл бұрын

Thanks 😊

That is a beautiful piece of wood! Love the chatoyance! What is the name of the little electric tool you used to remove the tenon?

@JackMackWoodturning

3 жыл бұрын

Thanks. Google electric chisel or power chisel you should find something similar. Depending where you live there are different brands available. This one is an attachment for a dremel but made by a different company.

What are you using to finish? This piece is so beautiful. I will be trying a similar project this weekend with a maple burl.

@JackMackWoodturning

2 жыл бұрын

I use this more than anything else: www.liberon.co.uk/product/superior-danish-oil/ 👍🏻😉

@gingermadore2328

2 жыл бұрын

@@JackMackWoodturning Thank you for sharing. I loved the look of your finish.

@JackMackWoodturning

2 жыл бұрын

Thanks man 😊😉👍🏻

Hermoso trabajo por favor decirme nombre del líquido que le aplica para las grietas?

@JackMackWoodturning

3 жыл бұрын

CA glue or super glue 👍🏻 Thanks for watching. 🙂

that is a beautiful piece, enjoyed watching you at work. What finish do you use?

@JackMackWoodturning

3 жыл бұрын

thanks for watching. the finish was homemade shellac and past wax

@user-sk1db1rk9b

3 жыл бұрын

,, þ

Beautiful piece and by the way i like listening to only the music of your lathe. Can you tell me how aged/dry the wood was before turning? Thanks.

@JackMackWoodturning

3 жыл бұрын

Hi Chris, This piece of wood was air dried for about 3yrs. but that was only because i forgot i had it. normally i would turn this wood when green and to its final shape. (once turned rather than twice)

@pundilklakde6274

3 жыл бұрын

सो म

Hi Jack. Beautiful plate with a great shine! By what means did you get this shine? Thanks in advance! Gerhard.

@JackMackWoodturning

3 жыл бұрын

Thank you. The finish is 2 coats of my homemade shellac sealer burnished with fine steel wool, then microcrystalline wax high gloss. 👍🏻

@Haunold

3 жыл бұрын

@@JackMackWoodturning Thank you Jack! Gerhard.

Beautiful, what finish did u use?

@JackMackWoodturning

3 жыл бұрын

Thank you, the finish on this piece was home made shellac sealer and microcrystalline wax. Thanks for watching. 👍🏻👍🏻

Beautiful piece!! What would you charge for for such a gorgeous piece?

@JackMackWoodturning

2 жыл бұрын

Thanks Kathy, this platter sold straight away for £180. I appreciate you watching 😊👍🏻

jolie pièce , la finition c'est en gomme laque maison ?

#skwooden

@JackMackWoodturning

3 жыл бұрын

😊👍🏻

use even

beutiful. What finishers did you us??

@JackMackWoodturning

3 жыл бұрын

Thanks Gill, the finish was home made shellac sealer and high gloss paste wax

Yah macin kitne ki h

What would you use for a food grade finish?

@JackMackWoodturning

3 жыл бұрын

Pure tung oil for me is the best food safe finish 😊👍🏻 ( you have to give at least 3 coats with 7 days or more in between coats)

Kind of like a soup bowl??

@JackMackWoodturning

2 жыл бұрын

Not really no. Thanks for watching tho 👍🏻😆

What do you use for the finish? is beautiful!

@JackMackWoodturning

3 жыл бұрын

thanks for watching Aleix, the finish is home made shellac sealer and microcrystalline paste wax

Which polish used for this item

@JackMackWoodturning

3 жыл бұрын

Thanks for watching. This platter was finished with a microcrystalline high gloss wax. 😊👍🏻

A

The only reason I clicked on this video was because I was confused by the orientation of the wood.

But what is the funtion

@JackMackWoodturning

2 жыл бұрын

Cat bath… for kittens, with tiny little kitten toes.

How can I find this Lathe?

@JackMackWoodturning

2 жыл бұрын

Google Axminster Lathe. I would highly advise against it however. For the price there are much better lathes available. Iv had nothing but problems with this one which seems to be a common issue for people who spend their money with Axminster.

Wth, kinda chisle was that?

@JackMackWoodturning

3 жыл бұрын

1/2" bowl gouge . thanks for watching. 👍🏻

You learned to turn, Now learn to talk, otherwise good job!

@JackMackWoodturning

3 жыл бұрын

thanks but I don’t want to talk on my videos mate, these are not meant as tutorials, just a video of me wood turning. KZread is full of turners of all skill levels who like to talk you through their process. I’m glad your watching my channel and appreciate your input, but il not be making tutorials. 👍🏻