Your new shop is getting better and better and I feel envious of your high ceilings. Also great to see you not freezing while elegantly explaining your setup 😊

@3x3CustomTamar

Жыл бұрын

Every time I walk in there in just a sweatshirt I take a big sigh of relief. Ha.

@vaughnmaurt5013

Жыл бұрын

Yes I was thinking the same….looking great

@jeremyspecce

Жыл бұрын

@@3x3CustomTamaryou’ve earned it!!

I love that you blank out the faces of your family. Kudos for that. Nice to know that your fingers and nose will not be freezing anymore in your nice new warm shop. Congratulations. Keep up the great work. Love and Respect from North London UK.

Now that the dust collection is in place we look forward to more projects 😂

@3x3CustomTamar

Жыл бұрын

On my way to the shop!

I went with an Oneida system, maybe 20 years ago... One of the best ever investments I ever made in my shop. They have new and improved just about everything. Mine is a 3 hp system, and my old shop was 24 by 36. My new shop is maybe 2400 feet, but the DC sits in the middle. The ground wire is a new thing. There has always been talk about static build up and sparking with the potential of starting fires. Never heard of it happening, but it doesn't hurt to be prepared. The sensor in the collection bin is new. I could have used it many times. I had found my filter totally full of 'stuff'.... Not sure what they say about cleaning the filter. When mine filled up, I ended up taking it out to the back yard, and then hosed off the inside. The old filters were paper, and it didn't seem to change anything, other than keep the dust down in the neighborhood. The quick clamp seals for pipe junctions is a great idea, as are the wire loop things for suspending the duct work. I do wish I had a 12 foot ceiling in my shop. Mostly so I could move full sheets of plywood around more easily. Hard to pivot a full sheet when you have a 9 foot ceiling, but my shop was designed so it would be converted into a house when my birth certificate expires.... The remote control things are new as well, I had one called 'the Lone Ranger'. It was set on an FM frequency so you could even turn it on from outside, and not have to point it at the receiver. I did make a point to have 2 of them. Mostly because I have several wood lathes, and lost one in the shavings. The one in the lathe room is on a hook. The other in the flat work room floats around since half the time I forget to put on my apron.... Any comments about removing dust build up in the filter? Some just tap the outside of the filter. I have seen some that had a 'beater' on the inside to knock the dust loose. One other feature I had considered would be a 'slow' speed so you could filter out all the floating dust in the shop rather than using an air scrubber thing....

Excellent to see you back, 1 yr old daughter and I love your videos. That is an amazing system - may your lungs forevermore be dust free!

So great to see you back! Super cool dust collection set up. That was scary to see all the fine dust particles on the wall and glad you're properly protected now.

@3x3CustomTamar

Жыл бұрын

Yeah, those bag filters are really awful. If only I could describe the “clean” smell my shop has now after turning the system on. It really is night and day.

You're back!!🎉 been too long, I'm in my lunch break so looking forward to watching this tonight 😊 hope you and the family are all good 🇬🇧

@3x3CustomTamar

Жыл бұрын

I’ve been busy with the family! All good stuff… sometimes I just need to take a break and focus on them ☺️

Tamar, you did an awesome job installing that system! And yes, I could hear the increase in rpm when more than one gate is open. So happy for you in this new shop. It's beautiful. Congrats!

@3x3CustomTamar

Жыл бұрын

I smile every time I walk in here now ☺️

I love seeing you get rewarded for your hard work. You deserve it.

Wow. I recently started following you and have so far made your router jig and your small crosscut sled, (which are my first ever woodworking projects) and it is amazing to see how far you have come. Congrats on all of the success. You deserve it. You make great content. I really appreciate how you break things down and your outtakes are hilarious.

@3x3CustomTamar

Жыл бұрын

Haha so glad you enjoy!

I just finished watching this video and I'm just sitting here with my mouth open. It's a great new space. The new woodworking equipment is a huge upgrade. When you add what you just did to the equation it is an exponential leap. I'm a step or two behind you in the evolutionary process and I am so acutely interested in what you're doing. Keep the videos coming.

i'm sure you had a "blast" setting this all up. it's exciting getting pallets full of boxes. And it's a strenuous task doing all the research making decisions and how much of what to buy. but it's all for your health and worth every penny.

What a wonderful system! All the years of hard work have really paid off for you. I can't think of someone more deserving! Glad you had time off but even more glad you're back.

@3x3CustomTamar

Жыл бұрын

☺️☺️

That is one huge improvement. I’m so impressed and inspired by how far you have come. From starting off with your Dewalt contractor saw to all that you have now. Amazing!!! You and a few others inspired me to start my own channel and I just wanted to say thank you. Keep up the wonderful videos. I always look forward to the next one.

I am so envious of your new shop and all the improvements you are adding. Looking forward to seeing you get back to building!

@3x3CustomTamar

Жыл бұрын

I’ll get in the shop now! Ha

This is awesome. I would love an Oneida system at some point! Hopefully when I’m able to build a larger shop… Your work is so amazing and your videos are phenomenal. I love that you go through so much of the process with us and explain what’s going on, and include the how and why! You’ve pretty quickly become my favorite woodworking creator!

That setup is a far cry from the unheated garage & portable contractor saw 🤣 (and yet, you still turned out great pieces!). Congrats on getting everything situated. Looking forward to the new builds!

@3x3CustomTamar

Жыл бұрын

I can’t believe I worked in the winter all those years 😂

You have some great sponsors plus a huge resource for help. Thank you all who assisted Tamar.

It's nice to hear from you again. I'm looking forward to you're next furniture building project. 😊

@3x3CustomTamar

Жыл бұрын

Going into the shop now to get started!

One of my woodturning friends bought this unit a few years ago……….. and just loved it. A great product

Amazing shop. What a journey, Yours is best example of “Think big, start small” To Festools, Sawstop, Oneida from where you started with hobby tools. Thank you for amazing videos. By the way your router jig is the most used tool in my hobby shop.

I love watching my favorite channels grow! Cool to see how you progressed from a jobsite saw in an uninsulated garage to some top of the line equipment in a tricked out comfy workshop. So excited for you Tamar, can't wait to see what future projects come out of this shop.

@3x3CustomTamar

Жыл бұрын

Being able to work comfortably in the winter has changed my life. Excited for everything I’ll build in here!

Oneida has sure progressed since I bought my Oneida system back in 1994. It was Oneida first system. They where only really making cyclone separaters and oversized felt bag filters at the time. Which was attached to an off the shelf dust collector. I have been upgrading it recently with iVAC PRO Blast Gates and newer duct work.

@3x3CustomTamar

4 ай бұрын

Yeah… they are really top of the line! So awesome

Awesome. It is so exciting to get proper dust collection plumbed in the shop. A few months ago my dad helped me hang 4 & 6 inch pipe for the shop. Seeing it all and walking around without tripping over dust hoses makes me so happy.

@3x3CustomTamar

Жыл бұрын

Right?! I didn’t realize how much floor space I had in that corner

Congratulations on your new dust collection system. I look forward to seeing it in use and how you modify it in the future.

I get so excited every time I see a new 3x3 video! They're few and far between these days (completely understandable) but still so good.

Congrats, looks like a nice system. Hope it serves you well and keeps your shop clean and your (and your family's) lungs protected. Congrats on the jointer too, the new shop is really coming together nicely!

@3x3CustomTamar

Жыл бұрын

It’s getting better and better every day!

Oh my goodness, I’ve just learned so much practical stuff. I really need to invest in a major dust collection upgrade and you are my inspiration. Great video!

I bought the 7.5hp regular Oneida cyclone and made an extension arm for a neighbor's car motor hoist to lift the fan-motor onto the stand. That fan and motor must have been 400 lbs. I was using my 170 lbs to counterweight to lift and as soon as I moved forward to center the fan on the cyclone cone the hoist would start to tip. Finally collected enough bricks from the yard to lift the cyclone into position. Without the hoist it might have taken 3 men to do that work. Oneida has been a good purchase for keeping my woodworking shop clean.

You did a great job putting that system together. Slow & easily figuring out where the Drops needed to go. Your lungs will appreciate the cleaner air. This is going to be a huge improvement to your shop. Best wishes for you in all your future builds.

@3x3CustomTamar

Жыл бұрын

It’s already been so amazing

Love the bit on your router table. Wild how much of a difference this new system made! I really liked their full package for planning and implementing your ducting!

@3x3CustomTamar

Жыл бұрын

It’s been a dream to work in here!

So nice to see all your hard work fulfilling your shop to where it is today.

@3x3CustomTamar

Жыл бұрын

☺️☺️

Wow !!!!!! Hats off to you. That was a lot of work. Well done.

Beautiful setup! Thanks for taking the time to share your considerations for each step. Every shop has it's unique quirks and tool demands. You really shed light on the ease of creating drops with minimal flex tube. Great table saw setup getting it out of the way even though its in the middle of the shop!

@3x3CustomTamar

5 ай бұрын

Glad it was helpful!

Glad to see the shop coming together. Watch for build up at the bottom of the double 90 degree lift. Consider a cleanout T or convert to a sloped run. The latter will give more suction a the end of the run.

The connection clamps are so easy to use and to modify. A new jointer is awesome congratulations. Like a kid with a new toy you will use it every day I know that I did. It looks so great. Very well done and now it's time to work. Thank you for sharing.👍♥️

@3x3CustomTamar

Жыл бұрын

🙌🙌

I am Jelly. Happy to see you upgrading the shop.

@3x3CustomTamar

Жыл бұрын

☺️☺️

Happy to see another video from you Tamar! Your shop is looking awesome!

Awesome dust collection system. Also nice to see you have a jointer, a tool you come to appreciate as much as your table saw and planer.

@3x3CustomTamar

Жыл бұрын

Just used it on my newest project and it was the best most seamless glueup I have ever had. Ha.

It's been great watching you get your new shop set up. So nice watching great makers up their game!

@3x3CustomTamar

Жыл бұрын

So glad you enjoy!

Hi Tamar, great looking system, and your work shop has some great tools the saw stop table looks the business looking forward to what you turn out. Really enjoyed watching you make your daughters bed. Love from South Australia 🇦🇺 🎉

My heart skipped a beat when you guys were putting that motor on the top of the collector base. Glad it went up with no incident. All my dust collection is Oneida. My biggest complaint is that you actually have to empty it. Because it's so effective. A good problem to have. Your install looks great. Congrats on the big upgrade.

@3x3CustomTamar

Жыл бұрын

Haha! I’d say that’s a good problem to have!

It is incredible to see how far you have come. You have worked hard for your success, enjoy it.

@3x3CustomTamar

Жыл бұрын

☺️☺️

I miss you!!!!! Am impressed, motivated and feel encouraged by your videos.... I appreciate the time and energy you put into y your videos for us.

@3x3CustomTamar

Жыл бұрын

☺️☺️☺️

Love these folks, Great Company!!! Video is very timely and extraordinarily helpful!!!

@3x3CustomTamar

Жыл бұрын

So glad it was helpful!

Just built a new house with 9’ ceilings and this style dust collection seems more than perfect for the plan. Great video!

@3x3CustomTamar

Жыл бұрын

Yes! Thank you!

I recognize and appreciate the shoe game displayed in this video! 😊

@3x3CustomTamar

Жыл бұрын

Haha I’ll pass along the message

Good to see you back! That collector and ducting looks amazing! Great job

@3x3CustomTamar

Жыл бұрын

Thanks!

Tamar, so glad to see you post a new video - we have missed you! Good dust collection will make a considerable difference in how comfortable it is to work in your shop. Looks like what you have now will make things much safer for you and your family. Looking forward to new videos of projects you build in this shop ... just hope they will not be as few and far between as in the past few months as I really enjoy your videos. Have fun in this new shop and make some really cool stuff!

@3x3CustomTamar

Жыл бұрын

I just finished up cooking dinner after milling some lumber and my kids will not be getting any extra fiber tonight like they have in the past 😂😂 really, it is a game changer, it feels so clean to work in there now. I hope I don’t take another break for as long as I just did, that was totally not intentional!

You’re such an inspiration! Nothing holds you back ♥️

@3x3CustomTamar

Жыл бұрын

💪💪💪

Felt completely nostalgic watching this! Glad to see the shop is coming along! Looking forward to the inspiration you've always given me, seems it's been forever! Worth the wait, though!

@3x3CustomTamar

Жыл бұрын

It has been a long time… just got a little busy with life stuff!

there is nothing so important than dust collection on a wood shop. I am very impressed on this setup.

@3x3CustomTamar

Жыл бұрын

So happy to finally have this settled

Like from the book, just passed the course on this but nothing to add, you explained it well and all correct.

Good luck on new shop!!! I learned a lot from your videos!

@3x3CustomTamar

Жыл бұрын

Awesome to hear!

You've made an excellent video explaining your reasoning and showing how to add dust collection. I've seen a number of tedious videos on this subject - yours is engaging as well as informative. Thank you.

@3x3CustomTamar

Жыл бұрын

So glad you liked it!

@emilb60

3 ай бұрын

I am looking into setting up a system in my new shop with approximately the same # of tools. I know you went all in with Oneida and they most likely gave the best system for endorsement and completely understand this. But for those of us that do not have that luxury, can you provide a ballpark of cost and any suggestions where you think savings can occur. This is not a negative comment because of your association with Oneida, I just want to be informed before I take the plunge. Thank you for this insightful video.

Tamar it’s sooo good to see you uploading again. I cannot wait to see what you are working on next

Great content Tamar! Congrats on the new system. This was a great video illustration for the build process and design considerations of a dust collector system.

@3x3CustomTamar

Жыл бұрын

Glad you liked it!

Thank you for the video I’m in the process of getting back into woodworking and so I’m doing a lot of research. Your video gave me lots of useful information

Congratulations on you new dust collection system and your new shop looks amazing glad to see you back to making videos and congrats on your collaborations with Jonathan Katz Moses on your new tools.can’t wait to see what you do next

@3x3CustomTamar

Жыл бұрын

Thanks! Busy working on a new project!

You did a great job! This is the 3rd video I've watched on installing ductwork today, and you made it look almost easy. I saw something when you were seeing how it worked on the individual tools. When you used the jointer, the bottom of your shirt looked pretty close to the blade guard. It's just something to be aware of! Anyway great job! Your shop is looking awesome!

Im so glad you leave in the gritty parts instead of editing them out. "Oh shit" and seeing the true struggle while lifting that motor is so relatable

@3x3CustomTamar

5 ай бұрын

We felt super accomplished after getting that motor up there. Ha

Great video. Appreciate your enthusiasm during the installation.

@3x3CustomTamar

Жыл бұрын

Glad you liked it!

I recently upgraded to an Oneida Supercell. Many options, many less expensive but none better. Plus I have clean shop OCD and using the 2.5” hose to sweep floors and tools is absolutely amazing! Well done on the install.

@3x3CustomTamar

Жыл бұрын

The supercell looks amazing too

Congratulations on the new machine!!!!

@3x3CustomTamar

Жыл бұрын

Thanks!

Thats amazing, despite declaring this was not your forte, u did a pretty darn good job Tamar.

@3x3CustomTamar

Жыл бұрын

The instructions were very clear so it made it easy!

Your new shop assistant did a good job. You are now at Pro level!!

@3x3CustomTamar

Жыл бұрын

💪💪

Glad to see the upgrade! I have the smaller system but I did use Izzy’s connectors and the red light from Oneida. They both work great! Hope to see more content.

@3x3CustomTamar

Жыл бұрын

So far it’s working out great!

Your new dust collection system is awesome 😊👍

very beautiful installation, perfect for a carpentry workshop and also for the health of the occupants

Wonderful system to collect the particles from the workshop... The most grateful will be your lungs and the walls of your workshop... congratulations on this achievement Tamar

@3x3CustomTamar

Жыл бұрын

Thanks!

Oh we miss you tamara,its nice to see you fine finally 😅, stay safe in your shop🌼

Absolutely love this! So happy for you, Tamar!

@3x3CustomTamar

Жыл бұрын

Thank you so much!!

Congratulations Tamar! What a system you now have and what a job assembling and installing. I’m anxious to hear how you like it. I am now rethinking my system.

@3x3CustomTamar

Жыл бұрын

I actually enjoyed milling yesterday. Ha

Big congrats Mrs Tamar 😻 that Oneida system is a total Beast ! your workshop has upgraded by about 1000% ! and the bloopers are still just as funny as always 😹😸 I was wondering about putting the system outside of the shop too / but you answered that in the video . 🙏❤😸😺

@3x3CustomTamar

Жыл бұрын

🙌🙌

What an awesome system! You do an excellent job of explaining the process.

@3x3CustomTamar

Жыл бұрын

Glad you liked it!

Looks so awesome! Love that swiffer hack for cleaning the walls. Never thought about that.

Really well done ! I think you have dust collection nailed down no doubt. Thanks for the time you took to show us how it all went together, a really well done video Tamar.... I'm excited for you ! Cheers from Utah... ;-)

@3x3CustomTamar

Жыл бұрын

So happy to finally have this all set up!

Very nice! In my previous house I had a dust collector for my table saw, and also a floor sweeper. It had a 20' hose that would collapse down to about 4' or maybe a litte less. It was definitely better than having 20' of pipe coiled up on the floor.

Finally someone on KZread installing the BEST DC system and not pushing Clearvue POS! I have had mine for over ten years and it is the best! I hope you love it as much as I do.

@3x3CustomTamar

Жыл бұрын

Grinning from ear to ear every time I turn it on 🙌

Nice shop! I have the same dc setup as you. Watching the lengths some folks go through to isolate the dust collector for the sake of noise reduction has always confused me. Any time it’s running I’m wearing hearing protection because I have another loud machine running. Go figure!

@3x3CustomTamar

Жыл бұрын

Yup! That never made sense to me either. I get the whole space saving issue, but not for noise reduction.

100% going back and watching this video was brilliant worth the watch on the missed content!

@3x3CustomTamar

9 ай бұрын

Glad you enjoyed it!

Wow Tamar, Very very nice. Great layout. The shop is looking amazing. You have worked so hard and you so deserve to have this awesome dust collection system. What a great video showing us the process. Enjoy working in your amazing shop.

@3x3CustomTamar

Жыл бұрын

So glad you enjoyed watching the process. It’s so nice to work in a clean environment

Just like a lil child with a new toy... Gotta love the big smile. Congrats on the new system!

@3x3CustomTamar

Жыл бұрын

😂😂 thanks!

i bought the same unit for my three car garage shop and its a beast...you will love it, is sure do!

@3x3CustomTamar

Жыл бұрын

Already loving it so much! It’s been such a pleasure to work in here!

That's a good-looking system. I am sure you will really enjoy it. Also, you will really enjoy the jointer!

@3x3CustomTamar

Жыл бұрын

Already enjoying it!

As a commercial electrician I run into Gripple systems for suspending light fixtures. They're great! Congratulations on the new dust collection system, y'all did excellent installing it!

@3x3CustomTamar

Жыл бұрын

Thanks!

Glad to see the shop is coming around! Looks great!

@3x3CustomTamar

Жыл бұрын

Thanks!

With the title, i told to myself “another dust collector video”😢 After watching it, i told to myself “wow, another amazingly good video”❤

@3x3CustomTamar

Жыл бұрын

Haha glad you liked it!

I am a 70 year old female antique furniture restorer. I have an electric winch mounted to the ceiling for heavy tasks. Lots of dollies and wheeled gizmo's everywhere.

you made it seem so easy, Kudos.. Love your new shop.

nice setup. Enjoy your new (good) dust collection!

@3x3CustomTamar

Жыл бұрын

Can’t believe it took me this long to get real dust collection. Thanks!

Yep that onieda is the best system I have ever seen I want one.

Congrats, glad your business is growing, been watching you from your beginning, love your success!

@3x3CustomTamar

Жыл бұрын

Thanks! I feel so happy when I walk into my space every day

I’ve been waiting for a new video!! Glad you posted one!!

@3x3CustomTamar

Жыл бұрын

☺️

This is the exact system I want. Very informative.

wow...! most excellent, tamar...! i can see now why it's been a while since your last video; you've been busy with the dust collection setup... you've come a long way since your first videos... your videos are very professional and well edited to flow smoothly and, thankfully, you do not let annoying youtube marketing mid-roll (dumb) ads interrupt the flow of information and/or demonstration you are presenting... i, as a viewer, appreciate that companies like oneida (and others) sponsor you so you can create content without the aforementioned annoying youtube ads and create videos that are entertaining and helpful... i look forward to more of your great informative videos...! (i especially love the videos on creating jigs for projects) thank you, thank you, thank you...!!! 😁🤗

@3x3CustomTamar

Жыл бұрын

So glad you appreciate that, I hate mid rolls too…

Waaaah.... pleasant surprise!! Nice to see you back!! Always enjoy your videos. Askwali um tu'mii'laih'tah (thank you for your work; Hopi)

@3x3CustomTamar

Жыл бұрын

🙌🙌

So good to see you back in business Tamar 👸🏻⚡️👩🏻‍🔧❤

Wow, that table saw setup is so clean. Congrats!

@3x3CustomTamar

Жыл бұрын

Thanks!

Awesome system and nice team work. I like the ceiling hooks and smart by assembling as much as possible before putting it in the air. 👍

@3x3CustomTamar

Жыл бұрын

It was really so easy to install by myself. Minus the motor assembly. Ha.