Thanks!

@boomerdiorama

Жыл бұрын

Wow! thank you!👍

hey Boomer, my favourite thing about you, has always been... that no matter what, you always make time to read feedback and reply. most guys get subscribers and act like pre-madonnas. i know it's probably alot of work. but it also means alot to be able to let you know how much we appreciate all that you've taught us so far. 🤘🏻thanks again

@boomerdiorama

2 жыл бұрын

Thank You Weston, I appreciate that. My wife told me when I started the channel to answer every comment ;-). I feel it is important for the sake of the community. I want to respect them for taking the time to write, etc. This community is fantastic. I am really blessed by it as well. It does take some work but I actually love reading all the comments. Everyone is cool. Even if they are not, I love them anyway . . . lol. Cheers ~ Boomer.

@westonoverland

2 жыл бұрын

@@boomerdiorama that's why, you tha man 🤘🏻

Thanks for a great tutorial! You make amazing scenery and models to attainable for the average modeler. I really appreciate it!

@boomerdiorama

Жыл бұрын

Thank you very much!

You’ve given me great ideas just what I needed many thanks and happy new year for 2023

@boomerdiorama

Жыл бұрын

Happy new year!

thanks again for the grate tip in using the tin. I would have never thought of that.

@boomerdiorama

2 жыл бұрын

Thank You - Luke Towan! Cheers.

Awesome tutorial, and will save money for sure!

@boomerdiorama

2 жыл бұрын

You can get real creative with the shapes of the tufts a well!

Great video. I am sold. I know what I want for Xmas now. Nice tutorial.

@boomerdiorama

2 жыл бұрын

Glad it was helpful! Once you make half a dozen sheets of tufts the unit pays for itself in short order. Cheers - Boomer.

It’s encouraging to see this thing in action. I had a homemade one which took a couple AAs, it did ok with really short static grass but I wasn’t happy with the results with anything longer than about 4mm. I picked up the static king and the 12v power supply for it, but have not tried it yet. Right about the time I got it, I needed to move my layout and scenery work stopped dead in its track. Thanks for sharing this. I now know I don’t have an 80 dollar hunk of junk waiting for me!

@boomerdiorama

2 жыл бұрын

You have a fantastic static applicator in this model. It's marvelous. I love the thing. It helps to transform the layout in a remarkable way. You will see once you start to play with it. There is a small learning curve but it's worth every penny in my opinion. Cheers.

Love your channel Boomer. You’ve encouraged me to take chances. Getting the 12v power supply for the Static Grass applicator was a game changer. The 9 volt battery just wasn’t cutting it. Thank you!

@boomerdiorama

2 жыл бұрын

It sure does make a difference for sure. Glad to hear it. Cheers.

Luke is how I found your channel.... he is an amazing modeler. His earlier work made me feel a novice like me could do it. Now that he's upped his modeling game with the couple of resin printers he has I feel he's playing in a league that the average modeler will go broke trying to keep up with, lmao! But man oh man is he good.. im happy that he's in that space he deserves it.

@boomerdiorama

2 жыл бұрын

Luke was one of my first subscribers believe it or not. I think he was number 36 or something. The thing with Luke is, he has to keep upping his game, otherwise revenue falls off. The channel dies on the vine so-to -speak. The whole content creator social media culture is a double edged sword. You start out loving it as anyone would, and then it becomes an obligation, and then it become a job. I love the art form. I always have and I never seem to tire of it. It's the only time I feel whole as a person when I am practicing "The Art of the Diorama." Cheers ~ Boomer.

Hi Boomer that was excellent. Those grass tufs turned out well. I have to try that out. Thanks for sharing.- Nicholas.

@boomerdiorama

2 жыл бұрын

Fore sure. It's a fantastic tool top have when you dive into scenery.

Very good review, thanks for doing this!

@boomerdiorama

7 ай бұрын

Sure thing. Cheers. 😁

Luke has some interesting ways to make trees also. I have made some trees with his method, now I am learning from you. Yep, we all learn from each other!

@boomerdiorama

2 жыл бұрын

That is awesome!

Incredible. First read about the use of a static grass applicator that you can make yourself in Model Railroad Craftsman. Your how-to-use-it video of one that is commercially available really filled in the gaps of what you need to know. Informative as always. Many thanks.

@boomerdiorama

2 жыл бұрын

Thank you very much! It is a bit pricey but once you use it a few times you realize the silver lining in it. Cheers.

@danielfantino1714

8 ай бұрын

I remember well that article. I.suppose it should work with any static fiber: wool, haïr, fur. What an idea to try with those, different lenghts and shapes that can be cut, tinter painted etc may be with different grille holes sizes in applicator. Worth a try for your cow field with "blobs" of manure and thick grass. Thanks Boomer for the show..

Another great tutorial 😀👍

@boomerdiorama

2 жыл бұрын

Thank you! Cheers!

Good video and a great tip on using the copper wire, thank you.

@boomerdiorama

2 жыл бұрын

Thank you. I love the copper wire extension. I use it again in the coming "Chain Link" fence tutorial and you will see how convenient it is in tight spaces. Cheers ~ Boomer.

@jhoodfysh

2 жыл бұрын

@@boomerdiorama I'll be watching for it.

Thanks for the great information! I've been wondering whether or not to get one of these and this helped me decide to finally spring for one. Those packages are too darned expensive and you don't get that much in them.

@boomerdiorama

2 ай бұрын

Actually static grass goes a long ways if you mix it up and spread it out some.😁

As you can tell, I'm catching up on your videos. . . . Great lesson! I haven't bought a package of tufts two years! Two ideas to share: first, I sift my grass before putting it in the applicator; the grass tends to come out easier. Second, I've heard that carpet tac works very well for the adhesive base for tufts - haven't tried that yet, but probably will. I'll let you know the results.

@boomerdiorama

2 жыл бұрын

Sifting the grass sounds great! Cheers.

I have been using Luke's method for the last 18 months, even trying his 3mm plywood template to keep the tufts vertical (found this to be more trouble than I really wanted). I have ended up making more tufts for friends and my club than for me, but as you say, static grass is relatively cheap. Most of the tufts that i make are for N scale, so the longest grass that I use is 7mm. I originally used simple PVA glue as the tuft base, but have switched over to using Mod Podge as my base - the matt medium is a much better base for tufts. I am now using a method that I first saw on Martin Wellberg's channel to apply my grass over larger areas - it effectively allows you to create tufts of grass over an area, then add different tufts mixed in with the already applied grass, really gives a great look for poorly maintained grass areas which are typical around railroad tracks. Loving your approach to making your scenery.

@boomerdiorama

2 жыл бұрын

I actually like it when the grass blades fall to the side. This way the edges always look right. Especially when you do ruts and overhangs etc. Cheers.

@WHJeffB

2 жыл бұрын

I use ~ 1mm thick cardboard templates and it works a lot better. You don't need the fibers to be completely vertical, you just want to prevent the stuff around the perimeter from laying flat. It also helps to lift the template straight off the tufts before the glue sets up, this will pull the fibers up as well.

Nice update thanks for sharing.

@boomerdiorama

2 жыл бұрын

Thanks for watching!

@medwaymodelrailway7129

2 жыл бұрын

@@boomerdiorama Thank you very much for replying to my comment. I have a new video out now. Hope you like and share.

I used Luke's diy static applicator vid to make my own and its amazing for the price I paid for it. Making your own tuffs is the way to go.

@boomerdiorama

2 жыл бұрын

DIY applicators work well enough. I can do it without a static grass applicator in a pinch as well. ;-)

Hey Boomer, Nicely done! I always let my matte medium, or Modge Podge set up a bit before I shake it out…”you just have to be patient with these things…”🤣👍

@boomerdiorama

2 жыл бұрын

It's great stuff for sure! Cheers

Another great video Boomer. Instead of tape, try magnets, works great. Also, pinch and stab 12mm and 7mm works on parchment paper too. I just apply a combo of 2mm and 4mm from the static applicator after to tie things in. Makes the mosaic tufting go a little faster.

@boomerdiorama

Жыл бұрын

Sounds great! Cheers!

I know what's going on my Christmas list! Luke made a video on how to make one.

@boomerdiorama

2 жыл бұрын

Good ol' Luke Towan. What a remarkable modeler that young man is. He understands the traditional model even in this post-modern world.

If I used one of my wives cooking pans for model trains I would be eating a lot of peanut butter and jelly, Bahaha.Cheers great stuff ,keep up the great job

@boomerdiorama

2 жыл бұрын

Hopefully she misses the video . . . lol.

Excellent ! Merci beaucoup 😊 from France 🇫🇷

@boomerdiorama

2 жыл бұрын

Fun, fun, fun!

@franckb473

2 жыл бұрын

Your video across the world ! Merci 🤩

@boomerdiorama

2 жыл бұрын

@@franckb473 Sounds cool! Cheers.

Hey Warren I started watching this and thought I know that Voice!! Wes Turnbull

@boomerdiorama

2 жыл бұрын

Hey Wes. I hope all is well in Powel River! Cheers ~ Boomer.

Tip; you can color the matt medium - green/light/dark or brown/light/dark - short/turf lightly then go back over with longer diff color. Verity works like layers of color. Like your paint .. mixing more natural. Love your work .. keep sharing. Enjoy.

@boomerdiorama

2 жыл бұрын

Sounds good. I just airbrush later. Cheers.

@billkrueger7549

2 жыл бұрын

@@boomerdiorama Yes, the airbrush has opened a whole new dimension for me.

Was thinking about getting the Woodland Scenics one, think I'm now sold on it, even though it's $150 here in Australia, should be money well spent, thanks for another great video...Reid 👍

@boomerdiorama

2 жыл бұрын

It's the best model railroad investment you will ever make if you get into the scenery part. The things one can do with it are awesome. Cheers.

@WHJeffB

2 жыл бұрын

Make your own... Loads cheaper and you have the opportunity to use a more powerful Negative Ion Generator. Luke Towan has a few videos on rolling your own and they are very good. I've built several (most before Luke was a thing). My most recent unit uses a 30kV Negative Ion Generator. The higher the kV, the more charge it provides and the better the grass will stand up.

@ReidsTrainStuff

2 жыл бұрын

@@WHJeffB should look into that, I've watched that video, but that electronic stuff always worries me, not something I'm good at.

@WHJeffB

2 жыл бұрын

@@ReidsTrainStuff It's a lot easier than most people think... The toughest part about it is buying the soldering iron and finding the will to use it. After that, use the right solder, and plenty of the appropriate flux, and that's not rocket science either. Plenty of KZread vids on soldering electrical/electronics.

@ReidsTrainStuff

2 жыл бұрын

@@WHJeffB I'm ok with soldering on basic stuff, do decoders all the time, might re watch that video see what I need and give it a go, only way to learn is to do it.

Just opened ours today. Tried it abit on the girlfriend's new N layout.Went with the power pack out of the gate.🚂🇨🇦

@boomerdiorama

2 жыл бұрын

Power pack is the way to go for sure. Have fun!

You had better luck than I did. You are correct about the battery, 5 minutes and it won’t stand 4mm. My 12v adaptor didn’t work. Something wrong with the unit. Still lots of room for improvement.

@boomerdiorama

6 ай бұрын

It seems to be hit or miss at times. On a good day it works great though. I also usually follow up with a vacuum to stand it up more as well.

Just brought one here in nz,cheapest I found was $200 then $67 for power plug. Thanks for videos

@boomerdiorama

9 ай бұрын

Awesome!

I like those home made tuffs because they are cheaper and you can make them any color you want

@boomerdiorama

2 жыл бұрын

Yes! Plus you can paint them with the airbrush before you pull them as well!.

I did see Luke Towan's video on this but had forgotten the tray method. Thanks to Luke and to yourself for the reminder. I found mixing a tiny bit of the very fine (finest) ground foam in with the static grass for shorter (2mm to 5mm static grass) gives a good result too. Probably not so with longer grass. I've yet to be able to put seed heads on my dead longer grass tufts or flower buds on the green stalks......Any tips?

@boomerdiorama

2 жыл бұрын

Yes. Mix it up is great idea! Cheers.

The metal pan is a great idea to catch the excess static grass because it goes everywhere!!!

@boomerdiorama

2 жыл бұрын

Yes it does, but the main advantage is the electrical static field charge it creates around the paper. The static grass performs better this way. Cheers.

Thanks!

@boomerdiorama

3 ай бұрын

Thank you!😁

Do you think that the 9 volt would work better/longer for smaller grass? Those are pretty cool. Thanks for the tips.

@boomerdiorama

2 жыл бұрын

It does work for shorter grass (for a short duration), but it's lame performance compared to the 35 dollar transformer (made for it), is superior.

I ended up making one for about 12 dollars if memory serves. Trying to stomach the initial outlay for a factory one. It works just as well. If one thinks out of the box there's a lot to be done within the hobby inexpensively.

@boomerdiorama

2 жыл бұрын

Yes. We all save in one area to justify spending in another. I built "Glover Road" with pennies. All stuff I had laying around.

@WHJeffB

2 жыл бұрын

That's cheap! My last one cost me about $65US, but only because I used a hi-power negative ion generator (30kV) meant for higher end products, rather than one of the cheap, lower power units found on eBay.

Cool trick

@boomerdiorama

2 жыл бұрын

Saves me alot of coin and time as well! Cheers.

Just a quick question. How long after the static applicator has done its job before the tufts can be removed from the parchment paper to apply to the layout?

@boomerdiorama

2 жыл бұрын

I let it kick overnight. Twelve hours should do with a fan on it.

@normtaylor3240

2 жыл бұрын

thanks. Cheers!

I have a question about the power supply - can it be replaced with a regular power supply? Or do I need to buy a special one dedicated to this model?

@boomerdiorama

4 ай бұрын

I think any 12 volt power supply would work. You can find cheap power supplies at the thrift stores. This one is 12 volts - 1.5 amps.

Can you make a video about static grass flowers? I'd be greatly appreciative!!!

@boomerdiorama

Ай бұрын

Great suggestion!

Do the tufts come off easily? I've used non silicon baking sheets (didn't know silicon existed) and I had lots of trouble removing the tufts. Last lot I did on glass, that worked well and I could scrape them off easily. I tried lighter green long with darker short grass which seemed to work well. I'll look out for the silicon sheets.

@70rrsteve51

2 жыл бұрын

Hi Mike! Just wanted you to know that I tried Boomer’s tuft method from a previous video - just parchment paper without the pan. I used Mod Podge matte medium…and it worked perfectly. The tufts and lines of grass I created peeled right off.

@mikerubynfs

2 жыл бұрын

@@70rrsteve51 The glue may have been the problem I now use Mod Podge but used straight PVA before.

@boomerdiorama

2 жыл бұрын

They practically fall off. Initially, the tufts hold well enough so you can airbrush them as well. Cheers ~ Boomer.

A metal cookie sheet would have lower sides plus is larger for more area to make tufts.

@boomerdiorama

Жыл бұрын

Sounds good!

Won't the parchment paper from the roll work also or is there a different between the two; I'm not talking about wax paper; the parchment paper that comes in a roll like the wax paper does.

@boomerdiorama

2 жыл бұрын

Yes, absolutely it will! I just happened to have these around and they were convenient. Cheers.

@WHJeffB

2 жыл бұрын

Another tip... Instead of taping the parchment to the metal (steel) cookie sheet, buy multi-pack of the small rare earth magnets and use those to hold the parchment down instead.

Thanks for sharing. Yeah I did see Luke's video and I made some this way. You mentioned using water? Can you share how you use water? Thanks.

@boomerdiorama

2 жыл бұрын

Watered down glue (matte medium). You dab it heavy on the layout and lay grass. Cheers.

@Vman7757

2 жыл бұрын

@@boomerdiorama Okay I think. See if I can try that.

Hi Boomer~I'm a good month behind in watching but I savor each and every one of your entries. Like Weston Overland (below), I truly appreciate your taking the time to respond to comments. I know this "project" is a labour of love for you, else you wouldn't be doing it, so I, along with the many hundreds of others, appreciate all your efforts. Thank you. I do have a question for you. I'm at the backdrop stage of a small shelf layout (11'3" x 18" x 16" high, roughly the size of Glover Road). There are many, many techniques in constructing a backdrop. Of course, there are photos. But when you get into painting a backdrop, it seems just about everyone talks about feathering the lighter low horizon with the darker sky (by the way, I'm using the Air Blue you're using). I see the merit in doing that because that's the way it looks outside. But I'm wondering about the practicality of that, with both a shallow layout depth and a short height. [By the way, my actual layout viewing height is at eye level.] On The Immersive Model Railroad, it looks like you went Air Blue all the way, bottom to top. And I get that because you have all the warehouse structures right at the wall, effectively blocking the horizon. I may have a few buildings that block the horizon but mostly it will be foliage. I'd have to go back to Glover Road to see how you did that, but I suspect it is the same. I don't necessarily need a lengthy written answer from you--that takes a lot of your time--and perhaps you address this in the videos I've left to see, but with your great artistic eye, if you could talk about this at some point, it would be most appreciative. Sorry for the length of this. Thanks.

@boomerdiorama

2 жыл бұрын

Thanks for asking and sharing your thoughts. When it comes to backdrops I take the "less is better" approach. One thing I do emphasize is to use "curved" corners if you run two sections at right angle's like I have done with River Road. With a narrow layout like this, I see no need to "feather" color because I stage props (building flats, etc.) to fill the horizon space. How many times do we pay attention to the sky horizon when we operate, or stand by rail fanning in the real world? I don't. I find the imagination fills in the sky subconsciously when it is rendered as "negative" space (in this case, "Air Blue"). Painting backdrops (unless you can really master the art), end up looking cliché, or silly in most cases, in my opinion and experience. But have at it if you desire! I have done it in the past, but probably won't bother ever again. I am more concerned with the foreground features (first 50-100 yards), than the background. I like to view the model railroad as a shallow stage with actors, not a lengthy vista. However, I will make exceptions if I am forced to do so. I hope that helps some. Cheers ~ Boomer.

@briankistenmacher

2 жыл бұрын

@@boomerdiorama I agree with you. I should have stated that for me painting a backdrop will be blue sky only, maybe some clouds but I don't know. My backdrop will be styrene and it will be coved. Thanks.

@boomerdiorama

2 жыл бұрын

@@briankistenmacher Sounds great! Cheers.

HELP I must de doing something wrong I bought the Woodland scenics static king and it useless for grass over 2mm. I'm using Woodland scenics tac to stick the grass and the ground cable on the base next to where I'm applying grass but 70% of the grass is flat. Any advice? I would be most grateful Thanks

@boomerdiorama

Жыл бұрын

Do you have the transformer as well?

@bodienutt1

Жыл бұрын

@@boomerdiorama Hi thanks for your reply I don't have a transformer just the 9v battery is there a difference in performance

@boomerdiorama

Жыл бұрын

@@bodienutt1 There is a remarkable difference in performance. You need the transformer. It's a little more cumbersome to use with the extra cable in the way but makes a huge difference. I find the static applicator has a bit of a learning curve as well and worked best with the shorter grasses like 2,4,7 mm. I "Pinch & Stab" in the 12mm for tufts etc. by hand.😁

@bodienutt1

Жыл бұрын

@@boomerdiorama thanks I will buy one and give it a go

@bodienutt1

Жыл бұрын

Hi purchased one today and it worked perfectly thanks

Any issues with it shocking you? Other applicators have this problem and I have to be careful because my afib can get triggered by electrical shock

@boomerdiorama

4 күн бұрын

Yes. I have been "shocked" once or twice. To be honest with you, I don't use the device much and prefer to "pinch-and-stab" the tufts, etc. into place by hand. It looks more natural that way.

Surely a suitable 12V power brick can be had for more like $10?

@boomerdiorama

Жыл бұрын

Yes. I think so indeed. It doesn't work well without the power supply.

Curious - where are you located? Saskatoon, SK here.

@boomerdiorama

7 ай бұрын

Fort Langley British Columbia . . . just a stone throw away from the Canadian National Yale Subdivision on the Fraser River. ;-)

Can you use wax paper for this too?

@boomerdiorama

2 жыл бұрын

I believe you can!

What do you do when your package of grass is very clumped or compressed when you first open up the package you’ve bought? I’m not getting the simple success that is evident in your video

@boomerdiorama

Жыл бұрын

The applicator works best with 7mm, 4mm, 2mm. You can use a flour sifter to loosen it up first.

Tip; use waxed paper or butcher paper, clip ground onto paper and try no metal needed. Plastic tops under paper help, but wood works too. Been doing this for the club for years. You can reuse material over and mix/stretch like your paints. Enjoy

@boomerdiorama

2 жыл бұрын

Thanks for the tips!

@billkrueger7549

2 жыл бұрын

You share so much and I have learned much, wanted to toss some back to you, @@boomerdiorama

@boomerdiorama

2 жыл бұрын

@@billkrueger7549 Absolutely. Cheers.

@WHJeffB

2 жыл бұрын

I've done a bunch of experimentation... The metal cookie tray under the parchment works MUCH better!

@boomerdiorama

2 жыл бұрын

@@WHJeffB I think so as well. Thanks for sharing! Cheers.

If anyone can actually find a Static King in the $80.00 range…please post a link! I can’t locate one for much less than $150.00 once taxes and shipping are added.

@boomerdiorama

2 жыл бұрын

Wow! They must have gone up in price. I do think it to be one of the best "tool" investments for the model railroad though. It's an essential scenery tool. ~ Boomer.

@70rrsteve51

2 жыл бұрын

I’m thinking I’m either going to have to make one, or bite the financial bullet and buy one.

Props to Boomer on my YOU TUBE video POSTAGE STAMP Scenes

@boomerdiorama

2 жыл бұрын

Thank you Chuck! I like the pic you have chosen to model as well. Cheers ~ Boomer.

Four years ago Luke did a second video on a DIY static applicator. kzread.info/dash/bejne/jINlzNSOfMK2fLg.html

@boomerdiorama

2 жыл бұрын

Yes. Luke's tutorials are fantastic! Cheers.

I made mine with junk that I had around my basement and a 6.00 dollars Negative Ion Generator and a old 12 Volt transformer .

@boomerdiorama

2 жыл бұрын

Cool!

Ive never really seen how these work, Impressive, once the matte medium has dried you simply lift off each one and glue them down, ? Im still going thru your channel so maybe i havent seen that particular video yet. Can you get zapped accidentily?😢

@boomerdiorama

Жыл бұрын

I just pull the tufts off the parchment paper and use the same matte medium to glue them down. Yes. You can get zapped (lightly) if you squeeze the probe (alligator clip) tightly in your hand.😆

Goodness sakes, I’ll never be able to get one, I’m on SSI!

@Hadassah-KaquoliMReno

Жыл бұрын

This makes me feel very sad!

@boomerdiorama

Жыл бұрын

I hardly use this applicator anyway. Most of my grassy areas I pinch & stab. No need for it. See here: kzread.info/dash/bejne/hIqgj66imqvPZqQ.html

@boomerdiorama

Жыл бұрын

You don't need an applicator anyway. See here: kzread.info/dash/bejne/kWSF1sSll7O2hpc.html

So far I cant get the grass to stand up

@boomerdiorama

2 жыл бұрын

Try shorter grass first. Are you using the transformer? Check the electrical wand connection as well.

@THOMAS81Z

2 жыл бұрын

@@boomerdiorama I'm using the wall adapter plug & im.waving the ground underneath as I spread it

@boomerdiorama

2 жыл бұрын

@@THOMAS81Z It should work. Maybe the unit is faulty.

@ericanderson6964

Жыл бұрын

I have the same issue, I can't get ANY size grass to stand up. Replaced the applicator but still get the same result. There is static in the hopper but all the static grass just falls out flat! Any ideas?

Hi

@boomerdiorama

2 жыл бұрын

Cheers.

Hey Boomer ! Love your Channel BUT you have YET to show your face ?? Simply Curious : )) Thanks

@boomerdiorama

2 жыл бұрын

Only one video in the River Road build shows my face. Good luck finding it . . . lol. ;-)