I always love these videos. It's like your brother is showing you how to work on a bike. Awesome video as always.

@sportbiketrackgear

8 жыл бұрын

+thetannedcalf Thanks for watching. We literally grab the parts, go into the shop and start shooting. No script, no practice, just a little wrenching. - Van

@stephenmwyatt2

5 жыл бұрын

Sure, then just get it cheaper on Amazon

Thank you WoodCraft so much for explaining how put the switch back on (included instructions) with allen bolts and then drill out the hex with a drill bit to effectivly make them "rivets" again. I used this method installing my alarm and drilling the battery bolts so nobody could cut power to the gps/alarm.

@joeygunzilla6878

5 жыл бұрын

Couldn't they just clip the wire?

Brian, these videos are a huge help. They have got me through a quite a few projects. Nice job and thanks for posting these.

@sportbiketrackgear

4 жыл бұрын

You are welcome and thanks for watching! - Van

BIG THANKS to Brian!!! You sir... are a legend.

@sportbiketrackgear

6 жыл бұрын

You are welcome and thanks for that my bother! - Van

maybe a 1/8" pilot bit could have sped up the process of drilling out those tamper proof bolts...but i might have went straight to the 5/16" bit myself also. Great vids, thanks a lot!

Pretty sweet !!

amazing video thank you for the content!!!! :)))))

what tank pad set is that? i do not remember you addressing this! Love this set has helped me alot!

Nice job...👏👏👏👏

@sportbiketrackgear

Жыл бұрын

Thank you for watching! - Van

Do you know where i can find one for 2014 triumph street triple? I still have the key if it is needed but the lock got brocken due to a crash.

Nice video as always, I was under the impression that the kill switch wasn't the best way to stop the bike running, I must be wrong.

Make sure you check Amazon for any product he is able to sell

So I’m in Canada I understand it bypasses the whole ignition but Canada ecu will still slow the bike to start ? Any Canadians buy this and work interested a lot

Please do it for triumph Daytona 675r !!!!

Great part. I have it in my shopping cart to add on. I just had a Yoshi steering stem nut come in today, looked great, but it was the wrong size. Do you happen to have the thread / diameter size of the 06-15 gsxr 600 steering stem? I can't find it anywhere. Thanks.

@sportbiketrackgear

8 жыл бұрын

+Joshua Hamby Did you get that from us? I do not believe we have had a fitment issue with that. - Van

@JoshuaHambyOfficial

8 жыл бұрын

+Sportbike Track Gear I made the mistake of eBay. I will order yours tho to make sure it fits

Hey Brian, hope you are doing great. Quick question, I see the 2006 GSXR750 has a different kill switch. It has ON/OFF position only not 3 switch positions like the R1 does. Will it still work? Or do I need an extra accesory?

@sportbiketrackgear

6 жыл бұрын

You won't need any additional parts, just the eliminator. Pretty straight forward install and Woodcraft provides solid instructions with their products. As always if you need help we are here to do that. - Brian Van

Hei Brayen, I am sorry if I dont right your name correctly, Do you know if is possible to get the same switch for R1 2004 model? Thanks!...

@sportbiketrackgear

8 жыл бұрын

+Humberto Guerra They do have one I will attach the link below! www.sportbiketrackgear.com/woodcraft-yamaha-yzf-r1-02-06-keyswitch-elimination-harness/

You would also need to flash the ECU to remove the immobilizer

@sportbiketrackgear

5 жыл бұрын

This is not an issue with US models, only euro bikes as I understand it. - Van

@josephmusino1190

5 жыл бұрын

immobilizer is wired with ignition, when he added the bypass it will complete immobilizer circuit when he turns the switch on

Is there a way to retain immobilizer function? For street use, it would make theft less likely than just starting the engine in full lock. Thanks for any replies!

@sportbiketrackgear

Жыл бұрын

Copy and paste from the Woodcraft site: **Works on EU models but you need to take the immobilizer ring off of your key-switch and fix a spare key in the center of the ring. The ring and key must remain on motorcycle to communicate with the ECU.** *FOR RACING USE ONLY** FOR EURO MODELS ONLY w/IMMOBILIZERS** Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.

Who makes a delete plug for the empty ingition space? I could have sworn I saw one recently. Thanks for the reply in advance.

@sportbiketrackgear

7 жыл бұрын

Not sure, If you find out please let us know!

Nicely done , is there a way to do this on a 2005 r1 ?

@sportbiketrackgear

4 жыл бұрын

Here is a link to that on our site: www.sportbiketrackgear.com/woodcraft-yamaha-yzf-r1-02-06-keyswitch-elimination-harness/ - Van

Hi.I just saw your video.I have actualy a R1 2017 with a harness YEC as well as commodo CARARO ENGENERING.do you think it works? because I would like to have the switch general on off on the run / stop button

@sportbiketrackgear

6 жыл бұрын

Do you still have the stock key cylinder on the bike? If you do then I would say it should. Now if that has already been eliminated then it may still work but you will need to rewire a bit to make that happen. - Brian Van

So doesn’t that bike have an immobilizer in the ecu? Once u install this harness then none of that matters? Can u explain that?

@sportbiketrackgear

3 жыл бұрын

These are designed for US models for the most part. Woodcraft does have a few applications for Euro models. - Van

My only issue with this is my ftecu active tune.. in order to save a tune air and fuel learned in my ride i have to leave the key on and shut of with switch other wise it wont save the new learned air and fuel mix

@sportbiketrackgear

2 жыл бұрын

In that case this would not be a good mod for you. - Van

Does the R1 have a immobilizer for the keys? If so how did they bypass this? Unfortunately they dont have this product for my Gen 1 s1000rr BMW

@sportbiketrackgear

6 жыл бұрын

They released another version for European R1's to manage this. We have not yet listed it on the site but intend to soon. - Van

Hey I Just Purchased One For My 2014 R1. Just Wondering Before Hand, Is It A Similar Setup?

@sportbiketrackgear

4 жыл бұрын

Yes the install should be pretty similar. - Van

can you leave the egnition switch on so that it locks like you would need a key to start the bike?

@joeygunzilla6878

5 жыл бұрын

Of course you can! People just like elimination the weight of the ignition

I love this video can you help me with my bike I misplaced my key I have a 2014 triumph will this bypass work for my bike if so where can I find this please help the bike has been sitting for like a year

@sportbiketrackgear

4 жыл бұрын

Here is a link to that on our site: www.sportbiketrackgear.com/woodcraft-triumph-daytona-675-r-13-18-keyswitch-elimination-harness/

@oillife2115

4 жыл бұрын

@@sportbiketrackgear ♥️♥️♥️👏🏽👏🏽

@oillife2115

4 жыл бұрын

@@sportbiketrackgear thank you so much

Would you recommend this for a street bike

@sportbiketrackgear

7 жыл бұрын

I would not. This would make it VERY easy for thieves to make off with your machine.

Hey van is yamaha r3 have one of these ?. If does please make a video how to install the key switch Eliminator.

@sportbiketrackgear

8 жыл бұрын

Unfortunately we won't be able to do that as the R3 is mainly a street bike. It would be far to easy to steal if we eliminate the keyswitch :/

@akasakakv9523

8 жыл бұрын

Oh okay van, thanks for the reply

@SeanStettnichs

7 жыл бұрын

Akasaka Verrian The R3 does actually have one of these switches. Also made by Woodcraft and essentially looks identical as the one shown in this video.

Well that's cool but you can't park your bike somewhere in the street as it could be stolen right? ;) What do you think about Kawasaki's GTR1400 keyless system? no need for a key and the bike recognizes you as soon as you get near it as you have a key fob in your pocket. What do you think of that? Thanks for sharing

@sportbiketrackgear

8 жыл бұрын

+ehsan83 Have not seen the Kawasaki deal, pretty sure that is the same as the key fob for my car. As far as stealing the bike it takes too long to put it on, would be easier to load the bike on a trailer. This is a mod for the race track only. - Van

@ehsan83

8 жыл бұрын

+Sportbike Track Gear True. As i said your system is definitly very cool but only for track use.

@ehsan83

8 жыл бұрын

+Sportbike Track Gear True. As i said your system is definitly very cool but only for track use.

Effin amazing and I wish I didn’t have to worry about criminals bcs I would definitely get that smh

@sportbiketrackgear

4 жыл бұрын

This is more of a race track mod than a street mod for sure. - Van

How i i know if i have the Chinese or European version?

@sportbiketrackgear

8 ай бұрын

If you purchased your bike here in the US you will have the US version and there will be no issues. In the event you are not in the US please reach out to Woodcraft directly for more information as I am not familiar with NON US models. - Van

Does the steering need to be unlocked?

@sportbiketrackgear

4 жыл бұрын

Once you remove the ignition cylinder the steering can not be locked. This is a track only mod IMO. - Van

Oh my god ! i need this one ~how can i order? Can you send item to Taiwan? Thanks

@sportbiketrackgear

8 жыл бұрын

+Samuel.T All you have to do is go to the site, place the order and we will ship it to you directly. - Van

Do they fit a 2015 triumph Daytona 675

@sportbiketrackgear

6 жыл бұрын

No unfortunately they do not offer one for the the 2015. 09-12 Daytona 675 /R and 06-06 675 at this time. - Brian Van

How does it start without the key code?

@sportbiketrackgear

7 жыл бұрын

This product is used to bypass the entire ignition system. Thanks for watching!

@kawilifezx10r23

7 жыл бұрын

vvsousa im sure bike thiefs find this useful

How much weight saving?

@sportbiketrackgear

8 жыл бұрын

I would say probbly a little over 1 pound! Thanks for watching!

Any issues with this draining the battery? My 16 battery is dead after 1-2 days of sitting after installing this.

@sportbiketrackgear

6 жыл бұрын

This has been on my bike since we shot this video and the battery is fine when it sits for a few days or weeks. Best practice is to put the bike on a storage device when not riding it. I have the Ballistic lithium Battery with their "Power System" maintenance device installed on it and plug the bike in whenever it is sitting in the shop. Here is a link: www.sportbiketrackgear.com/ballistic-evo-power-system-evz7l-yamaha-yzf-r1-15-17-8-cell-battery/ - Brian Van

@2m173

6 жыл бұрын

Thanks for all your help with my R1 Brian. Looks like the system is out of stock, and can only be notified when this is available to purchase again. Any idea when this might be?

@sportbiketrackgear

6 жыл бұрын

Just called Ballistic to see what the ETA is. Odds are I can have them get one for you now.

@2m173

6 жыл бұрын

Thank you! I just entered my email on on notification slot for system from link you provided and will order as soon as I can. Mike

@sportbiketrackgear

6 жыл бұрын

We can have it here in 2 days, Ballistic is putting a kit together now. Use this link to order it: www.sportbiketrackgear.com/ballistic-evo-power-system-evz7l-yamaha-yzf-r1-15-17-8-cell-battery/

great video. would be nice without the scratches from the screw driver..uggg

@sportbiketrackgear

8 жыл бұрын

+Anthony Battee We have a pretty good video guy, but you can't win them all!

I'm building a monster 1200s do you know if this will work on that

@sportbiketrackgear

6 жыл бұрын

Woodcraft does not list fitment for this bike at this time. I suppose it is possible one of them with Ducati fitment might work, you would need to call them to make sure. The Monster is not a bike they would focus on for this product as it is a race track specific product for sure. Give my man Waylon a call at Woodcraft and ask. - Van

Hey brother can you help me my 06 r6 throws a code 19...thank you in advance

@sportbiketrackgear

4 жыл бұрын

That deals with the side stand switch. A quick Google search will help you get where you need to be. Hard to diagnose via KZread comments. - Van

What happened to immobilizer????????

@sportbiketrackgear

8 жыл бұрын

+Arthur M. This motorcycle does not have one. - Van

@anderscronberg8038

8 жыл бұрын

As in the 2015 R1 in general, or only the bike in the video? Thought all newer models had to have the ECU unlocked/flashed before removing the keyswitch? Thanks

@sportbiketrackgear

8 жыл бұрын

As in the 2015 R1, not sure of the process' for some of the other bikes on the market.