You're a bloody hero for doing that domino rally section!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Chris Franklyn 😀 I knocked it down accidentally several times before I got it all set up.

@carpediemarts705

3 жыл бұрын

Videos eliminate the sense of hours and hours and hours he used cutting triangles. Art is like that. A lot if tedium that someone has to push through before you can even start creating. I started a similar hexagon art project last November. But I used stainless steel. I burned out after cleaning burnt stainless after 2 months with only one bucket of hexes with no sphere or other product made. The dominoes explains in seconds how "I spent my lunch break every day for two months cutting triangles" instead of, like phoning his wife or looking at KZread. Hundreds of minutes.

See, never throw anything away. Looks amazing!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Every time I throw something away I need it two days later. 👍🏼

my husband has collected knots for years, we have jars and vases displaying them all over our house. this is quite impressive what you have created here. your talent is incredible

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

Thank you, it is good to hear of a fellow knot collector. Each knot is like a wooden Rorschach test, everybody sees something different in the swirling grain. 😀👍🏼

Absolutely stunning display of skill, patience, perseverance, humor and film making! Stunning.

Not since Magritte’s “Ce n'est pas une pipe” has a better art pun been performed, as was this hilariously edited and yet serious piece of art done by this fine gentleman right here. Chapeau, sir!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

galex19 Thank you 👍🏼 I appreciate your positive review.

From thrash to treasure! Amazing idea!

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

Thanks 👍🏼👍🏼

What a visual stunner. So beautiful. 💕

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Givulinovich Thank you 👍🏼

Still one of the coolest things I've seen. 👍

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Dolphin Shooter Thank you 👍🏼

Very cool. Inspirational. dig the shop too!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Hey Thanks 👍🏼

Great job! It's the actual Gordian Knot in real life!

@ODDBALLGALLERYKeithWilliams

Жыл бұрын

👍🏼

Well as a retired wood pattern maker I find this totally fascinating. I have worked with lots of angles and now I see I will need to try and create one of these. Off to the drawing board AKA cad software to get a start. Lots of trial and error but this will be fun. I have done tumbling block turnings which compared to what you have done are rather simple. Fantastic work! Gary

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

ThePapa1947 Thanks 👍🏼. Let me know how it goes.

That the gentleman had accumulated many hundreds of knotty cutoffs should tell you just how much woodworking he does and how much experience he has (the specialized woodworking tools is a pretty good giveaway as well).

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

chuckschilling 👍🏼

Beautiful work!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

michael spencer Thanks 👍🏼

Sick. Nice work.

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

Thanks Steve 👍🏼 🤢

Omg - my dream wood shop!!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Dawn Boyer 👍🏼 mine too.

AMAZING, beautiful, great execution.

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

Thanks 👍🏼

just awe·some man art. Thanks for your camera work too.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

daniel burgess Thanks 👍🏼

Oh man, you're a pro! You made it look so easy.

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

Thanks 👍🏼 I have made 100+ of these so I've got most of the bugs worked out.

Eye that be a lovely piece of work Keith.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

DrTubeman 👍🏼 Thanks

cool wood knot ball bro

Absolutely incredible pal. 👊👊👊

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thank you

Mighty impressive that it aligns up so well considering that all the individual pieces are essentially cut by eye.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

chuckschilling The triangle I drew on each piece of wood was just a basic reference. The first tablesaw cut was just done by eye. That straight cut set up the first miter cut and then the second miter cut was against the stop so it was more precise.

@chuckschillingvideos

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams That makes sense. Thanks for setting me straight!

I was wishing you would definitely do the Domino move, and then you did it! I was so happy! Amazing work by the way!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Anirudh Puranik 👍🏼 It fell down several times while I was setting it up. 😀

just beautiful

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thanks 👍🏼

So Talented...appriciated your work.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thanks for watching 👍🏼

That’s knot what I expected to watch tonight.

@ODDBALLGALLERYKeithWilliams

5 ай бұрын

Thanks for the view.👍🏼 Just out of curiosity, did you see the short?

@thechumpsbeendumped.7797

5 ай бұрын

@@ODDBALLGALLERYKeithWilliams yes. Liked and subscribed because of the plywood short first. I’m wondering how the knot polyhedron would look if you’d also turned it into a ball? Or would the irregular grain make it it too onerous a task? Both look incredible and I appreciate the amount of work and precision required to make them.

@ODDBALLGALLERYKeithWilliams

5 ай бұрын

@@thechumpsbeendumped.7797 I planned on rounding out the Knot ball, but I thought it looked cool as it was. I used up most of my smaller knots on this one ,but I still have plenty of big knots left. Maybe I’ll build a much larger Knotosphere.

Ufff que satisfactorio es ver tus vídeos 😌

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

el drack 👍🏼👍🏼

mis respetos eres un artista consagrado y bellísimas tus piezas 👍👍👍👍👍👍👍👍👏👏👏👏🇲🇽💐

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

gracias 👍🏼

its just amazing!

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

👍🏼Thanks Tom

Imperfect perfection.....

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Adam Brown 👍🏼👍🏼

♥.♥ Nice Work.

So cool.

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

Thanks 👍🏼

Nice work 😍

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thanks 👍🏼

Beg to differ, that most certainly IS art!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼😀 Thank you

Magnifique !

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

05:16 Hahahahaha... I was ready for it! ;) Beautiful video *Keith*

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thanks Mike. 👍🏼

Would make a lovely lamp !

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

It would 👍🏼

Wow!!!

wonderful

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

I wish you would’ve gone into detail on how to make this (like what size triangles you used & how to arrange it). Very cool!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Try this calculator, it has all the info. geo-dome.co.uk/3v_tool.asp

this is so much crAzy, man!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

Love u man

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Right back at ya Carl. 👍🏼 Thanks for watching.

Brilliant acting and montage to

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Darius Varanavicius Thank you. 👍🏼

Should have made into a hanging light fixture. The shadows created by the gaps would cast amazing shadows at night

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

That would be cool. I could probably still put a flexible led strip in there.

nice!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

This is beautiful. Now I wonder how it would look like if you're to put a lightbulb inside

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

I tried this will some led strip lights , and it looked pretty cool. If I build another knot ball I will try to use more open knot holes so more light can get out.

I like. As if the potatoes were peeled, but the eyes remained

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

I never saw it that way before. Interesting observation. 👍🏼

1:17 Illuminati confirmed

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Jadyn Adamson 😀👍🏼

Like it! 😀 I was going to ask you if the domino event was all in one take. That was great! 👏 Can't wait for your next project and vid! Pam

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

pam carr The domino scene took way longer than it should have. I had to keep adding length to my workbench, and I knocked it over several times before I got it all set up. Then when I finally started the video camera, it failed to fall all the way twice. 😀

@pamcarr4003

4 жыл бұрын

I'm glad you stuck with it, it looked great! 😜💨

Wow, it looks like a wooden moon or an asteriod. I wonder how it would look if the final panels were instead bigger chunks of wood with much larger knots.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Rouverius I may try that...I have plenty of bigger knots left.

bravo bravo bravo

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

👍🏼👍🏼👍🏼

Dang, you left that cameraman inside

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Mayank biu It was just my little brother.

Вау вот это подгонка!!!

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

Спасибо. На то, чтобы все исправить, нужно время. В моем следующем видео я подробно расскажу об углах и техниках.

WoW this is Amazing !!! I Love everything about this...Great Work!! I haven't been able to find how many hours this took unless I somehow missed it? Also have you considered making these into lamps? I think would also be pretty cool being lit from the inside projecting out through the open knots. The Illuminknottylite! Thanks for sharing your process!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Kristi Harkins this ball took about two weeks to build and film. If I build another one I could use all open knot holes so it could be used as a light. Illuminknotty I like that😀👍🏼

@cancer7773

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams ODDBALL GALLERY - Keith Williams wow thats awesome very unique & amazing talent you have.... Ill check back periodically Id love to see an all open knotted Illuminknotty 😉 hope you do one... keep up the great work... Cheers

Mas vídeos así por favor :D

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Estoy trabajando en algunos 👍🏼

@josuedavidben9318

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams muchas gracias, tus vídeos son increíbles! Saludos.

I liked the video before it even started.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Benjamin Mellor 👍🏼

i was so scared that you weren't gonna knock them over like dominos

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

I knocked them down several times while setting them up. 😀👍🏼

i have thought on making something like the in the past, but i dont know how to calculate the bevel of the triangles. Do you have a video on how you came up with the? id love to give it a try. Such a cool project, nice job! Thank you!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

My next video will be the "how to" of a 5" diameter ball. Check out this website geo-dome.co.uk/3v_tool.asp They have a dome calculator. You just enter the radius you want and it will give you the triangle side lengths and dihedral angles. It is even color coded. This calculator is for domes but the sphere has the same angles.

@garcj108

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams Great! looking forward to it. Ill take a look at the website too. Thank you!

Looks awesome, though I would like to see how it would look if you turned it into a smooth sphere.

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

Thanks, I normally make them all round. Some of the knots were larger on the back side ,so I didn’t want to take the chance of them breaking out if I sanded off the corners.

@MovieMike1969

3 жыл бұрын

ODDBALL GALLERY - Keith Williams now I know there must be a large amount of work in these, but I would like to see the smooth sphere someday.

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

I may build a larger knot ball at some point.

Great idea 💡 👍 Just had a thought, if I was you I'd buy a bag of plastic eyes 👀 and wherever possible insert one into each of the knot holes 🕳 then at Halloween put it where the kid's can see it. If this doesn't scare the bejesus out of them nothing will! 💯 👍 🇬🇧

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

😀👍🏼

Is this an icosodocecahedron? Outstanding work!

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

I have heard it called a geodesic truncated icosahedron. Basically the pentagons and hexagons are subdivided into individual triangles.

Awesome craftsman ship! If I was allowed one question, it would be how do you figure out the angle of the glue side on the triangles? I’ve thought for it quite a bit, but cannot even find an answer in the net! Anyways, cool piece of work!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Hey Jordan, check out this dome calculator geo-dome.co.uk/3v_tool.asp

They all look like the "Illumiknotty" eye

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

TonydlP650 You are definitely in the running for “best pun”

@650tonyd

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams lol, I try! Do you have a website where you sell these?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

TonydlP650 This is my first Knot ball, but I have others at oddballgallery.com

@650tonyd

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams thank you

You oughta make stabwood vape mods

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Not exactly sure what that is.

Absolutely fantastic what was the angle you did your cuts please

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Thanks ...Check out this dome calculator geo-dome.co.uk/3v_tool.asp

Guy who collects knots

@ODDBALLGALLERYKeithWilliams

2 жыл бұрын

😀👍🏼 check out the “directors cut” of this video … I love my knots.

Out of curiosity, are you familiar with any of the sculpture work by George Hart?

@ODDBALLGALLERYKeithWilliams

10 ай бұрын

I am now, just looked him up. Seems we have similar interests. Although, his work is more advanced than mine mathematically.

Brilliant work. Would you tell how to find the angle?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

geo-dome.co.uk/3v_tool.asp.

Impressive! how do you find the angle?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Joe Coelho Check our this website. geo-dome.co.uk/3v_tool.asp

Muy bueno ese proyecto pero tienes que ilustrar bien para saber como lo hizo es decir los cortes los ángulos el procedimiento para aprender porque yo veo esos vídeos para aprender

5:18 Him: hello?

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

👋🏼

how did you figure out how many pieces you need at what angle? Awesome by the way!!!!

@ODDBALLGALLERYKeithWilliams

Жыл бұрын

I did it the hard way, lots of trial and error. Check out this website. It has an calculator and gives lots of good info on geodesic design. geo-dome.co.uk/3v_tool.asp

I see what you did there lol

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

😀👍🏼

What is the finish on this? It looks great

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Chris Johnson It is catalyzed lacquer called Duravar

Knot art but i know what i like lol

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

Do you sell your work? I cannot find a link? Your work is incredible

@ODDBALLGALLERYKeithWilliams

Жыл бұрын

Hey Nancy, Thank you 👍🏼 Check out Oddballgallery.com.

Don't know why but had to watch the short version as well. 🧐 Have you ever commented on the actual complexity of making these balls? I am thinking that, like box joints if you are only off .001 on each finger things go south rapidly. But, you seem so cavalier about making the plastic triangle etc. Can't believe it is as easy as you make it seem. Have you done an overview of your shop? Guess I need to look at your prior postings more. I found this one much more interesting because it was knot (🙄) turned. Probably because I am not a lathe guy.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Bill in Tustin Hey Bill I appreciate both views.😀👍🏼 I’m kind of new with this video thing so I’m just trying to figure out what people want to see. You are right , a little bit off on 180 pieces is a lot off during assembly. I dry fit the whole thing to check for errors. The plastic template was a bit oversize just to give me a general idea where the knot was going to be on the triangle. There seems to be some interest in a shop tour so I will probably do a video on that. I am also planning on a couple of how to type videos starting with some of the more basic platonic solids (Cube, dodecahedron, Icosahedron) I have made over 100 of these balls and this is the first one that I have not turned into a smooth sphere. P.S. I lived in Costa Mesa for a few years back in the day👍🏼

@billinfarmington5189

4 жыл бұрын

@@ODDBALLGALLERYKeithWilliams Where are you now?

@billinfarmington5189

4 жыл бұрын

I think the truth of the complexity is given away in the stops on the two (count 'em TWO) mitre saws. I went back to the first video to look at that one more time. Did you make some caliper type adjustment for the angle on the mitre as well? Not the 120's but the under cut? Trying to dial that in had to be challenging.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Bill in Tustin Central Illinois

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Bill in Tustin When I first started building these I used a digital protractor but now I just have a piece of quarter inch Lexan with the angle cut on it and I just hold it against the blade to set the miters.

guess I want one... and Jesus, what hole did I fall in to end up here

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

echotribe The algorithm knows you better than you know yourself. 😀 🤔

Hey! Just wanted to know what cutting saw you use

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Ashish Bagree I use Dewalt 12” compound saws with mid grade Bosch blades.

Nice work. What are the angles of the details?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Check out this website. It has a lot of good info on designing geo domes/spheres. The calculator will allow you to figure the triangle side lengths and angles. geo-dome.co.uk/3v_tool.asp

I am curious how strong it is. Do you think you could sit on it?

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

I have sat on it and I’m about 250.I have stood on similar sized spheres that I have built. This one is one of a kind so I will probably not do the stand test.😀

Put a warm lamp inside !!!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼

This is total.

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Benjy Wilson I’m hanging on your final word Benjy ...This is total what? Total genius? or Total crap?😀

What are the angles you must use to get the inner bend on the triangles?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Seminole Space Force Check out this website it has some useful information geo-dome.co.uk/3v_tool.asp

Illumia(infini)ti confirmed!

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👍🏼😀

How many segments and what angle are they cut at ?

In welchem Winkel werden die einzelnen Dreiecke geschnitten ?

5:19

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Antonio Oyarce Toro 😀👍🏼

This project is BEGGING to have some LED lighting inside.

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

If I build another one of these I will use all open knot holes and give the led a try I think it would look pretty cool.

@TheNewGreenIsBlue

3 жыл бұрын

@@ODDBALLGALLERYKeithWilliams Yeah, you should reach out to DIY Perks. He has done some pretty cool things with LED lights. BTW, I just found your channel... would LOVE to see a gallery of your other designs. With the production quality I figured you had made far more videos than you have published... so well done!

@ODDBALLGALLERYKeithWilliams

3 жыл бұрын

@@TheNewGreenIsBlue Thanks for stopping by 👍🏼 I’ve got a lot of ideas for videos, I just need to get em done. You can check out some of my other designs at oddballgallery.com

Put a light in the centre

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Kit Williams 👍🏼

De cuántos grados es el corte?

What is the song at 3:45 from?! It's an intro to something... Also, how does anyone give this a thumbs down!? Ughh

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Justin Paq It’s a jingle from IMovie.

@JohnS-hp2xu

3 жыл бұрын

Cop vs fireman on KZread made it popular.

You'd have a feild day at my place all there is is knots, walk up the path a billion knots everywhere you look knots knots knots

@ODDBALLGALLERYKeithWilliams

Жыл бұрын

Knots are cool👍🏼

What angle is the miter saw set at for the bevel cut?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

There are two different bevel angles for this layout. They depend on the miter angle / triangle side length you use. Check out this website , they have a lot of good info on geo- design. geo-dome.co.uk/3v_tool.asp

That's knot art

@ODDBALLGALLERYKeithWilliams

Жыл бұрын

👍🏼 You are correct.

@5:17

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

👀👍🏼

what is the angle of the cut on the triangle pieces???

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

My next video will be the "how to" of a 5" diameter ball. Check out this website geo-dome.co.uk/3v_tool.asp They have a dome calculator. You just enter the radius you want and it will give you the triangle side lengths and dihedral angles. It is even color coded. This calculator is for domes but the sphere has the same angles.

How many degrees is the measure of an angle

Can you make Venus?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Unity's Mondern Man always I could probably make a wood ball that looks like Venus.

How many hours did you spend on this project?

@ODDBALLGALLERYKeithWilliams

4 жыл бұрын

Benjamin Mellor. About 2 weeks with the video added. Cutting each triangle individually added a lot of time. Sanding the flats took longer than I thought too.

@codename495

4 жыл бұрын

400 million.