Thanks this will be very helpful when I do mine

Good job!!! 👍👍❤

Great video. Just wondering if the gyro is built in your ESC? Thx

Great video and useful guidance! Just a question,I installed the same brushless kit in my 144001 but in full immediate throttle with 2s 2600mah battery the esc restarts. Did you notice a similar behavior? Is there a possible solution using the program card?

Hello, nice vid. Just wondering if you had to bind the new remote control to esc. If so, can you send instructions please.

Wow😉 that is powerful

I bought this combo, this is probably the most detailed video I've seen. Thanks nd I subbed up bro. I'm still waiting for it tho, i don't need.100mph just wanted a bit more juice...

@rcingtoys5004

3 жыл бұрын

Thanks bro!appreciate! I can tell you it is way faster than you expect with this motor! Cheers 😉

@jimmyv1753

3 жыл бұрын

Agreed. I want power not speed. So I’m going with a tiny motor gear if I can ever get the diffs back together and functioning again

@rcingtoys5004

3 жыл бұрын

@@jimmyv1753 if you want power then try to downsize the motor gear pinion to 19 or 17 tooth. Then you will get more torque.but not so much speed. Good luck😉

@jimmyv1753

3 жыл бұрын

@@rcingtoys5004 yeah I figured that out. I’ve gotta get the thing rolling correctly before I can even think about the fun stuff. Lol. I took a little break from that car. I’ve got a few other projects going. I randomly find these types of videos hoping to find inspiration for that car

@wltoysrc-nogutsnoglory210

3 жыл бұрын

That servo broke after 10 seconds for me...where do i get a new one?

great video

hey @RCing Toys, did u end up needing the program card? is the stock motor mount compatible? stock engine gearing compatible too or need to buy same one that u bought?

Hi i like to ask a question about this build special the motor what the sheft length is it the stock one?

Your reverse body looks cool😅 man....you should try the LC Racing Emb1 body. Nice fit and got more spaces.

Отличный обзор! Канал бомба. Так держать. Холелось бы видосики о WLToys 144001 если не сложно. Ремонт, тюнинг. Большое спасибо.

Nice

Would the stock caro fit on this build with the caromounts?

Hi, Did you change the esc program with program card? Can you send parameters pls? When throtle, response is not immediate. Can't figure this out. thanks

I was on track to do a badass upgrade and somewhere along the lines I’m not sure how or when but my driveshaft got bent. But good. So on top of my motor esc and a few metal upgrade parts now I had to take the differentials apart and reuse the crown gears. Then I got stopped dead in my tracks when I completely bombed reassembly of the diffs even though I triple checked and verified the shafts were identical it locks up when I tighten the screws. All the wheels spin the same direction and everything works perfectly until I tighten the screws. 🤦🏻‍♂️ ready to toss the damn thing.

@that1barber550

2 жыл бұрын

I had this same problem, make sure you are using the right length screw. I put in too long of a screw and that was the problem

On the transmitter is knob for TH trim that is throttle trim

Does the grub screw in the pinion take a 1.5mm hex driver or allen wrench? Time 6:55.

Can send a link for the spur gear please???the one that fits on motor

Hola Tengo el mismo kit, lo conecto todo pero el motor no gira. El servo de dirección si. Cómo puedo hacerlo? Hay que configurar algo con una placa? No tengo esa placa. Gracias

Definitely cool. I would have used metal gears though. You were right there 😆 Oh well, when they wear out you can have fun redoing it I guess. I like to tinker too.

Do u have a test drive video?

I'm new newbie to rc cars. 144001 is my first car and 124019 is my second but they use identical remotes. Does the tiny mode button do anything on remote? I have been searching for the most practical upgrade brushless kit. I do enjoy tinkering thou...

@rcingtoys5004

3 жыл бұрын

No the tiny mode button doesn't do anything! Cheers

looks pretty straightforward thanks for the video!! Did you experience any problem/con to this upgrade?

@rcingtoys5004

3 жыл бұрын

Hi. I think one of the issues is the esc.! Is a bit slow on acceleration in specially on grass,on concrete is quite good! Could be the programme of the esc! I am waiting for a programming card from Ebay to see the settings on it! May I am wrong! And the others went straight fit. Now i working to make a monster truck from it. Longer chassis and bodyshell 1:12 scale! Cheers😉

@rcingtoys5004

3 жыл бұрын

Be careful the power on 3s is phenomenal! Request wheelie bar!😉

@jdss13

3 жыл бұрын

@@rcingtoys5004 is something getting hot? It's weird you say it lacks power, even on a 550 this thing rips

@rcingtoys5004

3 жыл бұрын

@@jdss13 the motor is really powerful.and is not getting hot! I mean the esc has maybe a weird programming on it. I have to check that with programming car. May has the acceleration put on slow mode!! I link the esc don't deliver full power on low speed.!😉

@toy_9045

2 жыл бұрын

@@rcingtoys5004 is this kit worthy it ? Remove the radio and servo

hello can you recommend me a 3s lipo that fits in there and how much faster does the vehicle drive with the kit?

@rcingtoys5004

Жыл бұрын

Hmmm.! I have one on 3s that fit in 144001! But i have wrapped it in tape and i can't say it's name...but i can say it's way too powerful for the weight! 😏

So is this kit good for this car ? or its uncontrollable, and what are you running 2s or 3s ? perhaps you know a good esc and brushless motor which is cheaper and is ideal for this car i am currently using a surpass hobby 2445-3600 KV but i would like to go faster but at the same time have nice handling.

@rcingtoys5004

2 жыл бұрын

With this car you can't go much faster because the weight. You must increase stability with metal steering rods and maybe wider wheels.. the motor from this combo it is proven to be a good one. 😉

I thought thr 27t pinion was too much for the brushless motors? That's what a bunch of other people are saying. I'm wondering why you can't just swap to a different pinion and spur gear completely so you aren't stuck with the 0.7 MOD gears. 🤷

how fast does it go? in mph or kph.

De cuantas Celdas es la batería

You know you can always relocate the battery holder pieces to use a longer battery, right? Or at least I can on my 124019. Not sure about the shorter 144001. I've never had one. Edit: I guess you can't relocate the battery holders on that one. Wow. I'm glad I bought the upgraded 124019 buggy instead.

Bonjour combien prenais en vitesse avec

Hello,this combo can use 3s lipo?found out many test got burn and how fast this combo can get?

@rcingtoys5004

2 жыл бұрын

Yes.but is not recommended.it has way to match power on 3s. The diff s can broke and driveshafts too.! Good luck!😉

What size is the servo? I want to know so i dont buy a wrong sized servo? 😅. Is it normal or micro? Or even 1/12?

@dronefan3589

2 жыл бұрын

Why don’t you buy the hole kit

Did you switch the differential by any chance and if you did what were they called

@rcingtoys5004

3 жыл бұрын

U can simply search 144001 differential and you will find what you need! Cheers

Esse esc pode por 3s

Just curious, I have a smashed JLB cheetah 120A, would I be able to take the electrical components off there and put it on my 144001?

@rcingtoys5004

2 жыл бұрын

Hi! If the motor is 3650 will fit. Otherwise if is bigger like 3660 will be no gap enough to fit... Good luck!👍

@cagelexi8954

2 жыл бұрын

@@rcingtoys5004 These are the specs. ESC:Upgraded 120a esc  Motor:3670 2500kv 4 poles brushless motor  Servo:40g waterproof metal gear servo,15kg/cm 0.15sec/60 Shoot. Not good, is there anyway to make it work? Can I line up the gears at a higher ratio maybe?

@rcingtoys5004

2 жыл бұрын

So. That motor is way bigger. You need to buy one 3650 3300kv up to 4300kv. And the servo is to big. You need a 3 wire servo 6kg that fits in wltoys. So you can use the esc and the transmitter and the receiver from cheetah. You need an different motor an servo.Cheers!

@cagelexi8954

2 жыл бұрын

@@rcingtoys5004 Awesome thank you!

Do you know how the 3rd channel should work because mine cant be turned on or off it's always on and if i connect a light to it nothing changes if i flip the switch on the controller

@rcingtoys5004

2 жыл бұрын

Apparently none of my controllers work on 3rd and 4th or 5th channel. Should be something I don't known yet. Good luck!😉

@maihhel3721

2 жыл бұрын

@@rcingtoys5004 i figured it out you have to use all the wires for example you can plug a servo there and when you flip the switch it would turn 90° and back

You happen to get a speed on ot

​@rcingtoys5004 I have the brushless, Rlaarlo Croboll CTR 1/14, and I'm trying to upgrade my motor with one that will fit, has more RPMs, and is 3S capable. Help???

How much you want for it?

Body?

Hey brother, do you have a program card??? I can't seem to figure it out. I don't have a program card. I'm turning the car on but idk what to do next. Please help...lol

@rcingtoys5004

3 жыл бұрын

Hi. Should be esc in channel 2 and servo channel 1. Normally the receiver should be binded with transmitter. And you will need a programming card because the brake force it seems to be 100% from factory which can destroy the differential if you have bigger wheels installed. Cheers

Hi i had this combo. After running a 3s the motor is beeping, and there is not response. Neither servo response. Which is the problem? Than you. Nice video!

@rcingtoys5004

2 жыл бұрын

I am still using the motor.i found it good. Maybe some bad wire connection with yours. Good luck! 👍

@jakub7048

Жыл бұрын

Did you get the reason? The same happening for me now

@michaelberube3940

Жыл бұрын

servo in ch 1 and throttle ch 2

Hi, nice video. What is your experience with this brushless upgrade kit? I bought the same kit for the 124019, but the kit does not perform well. It is jamming while trying to start from zero speed. And throttle output was inconsistent. Please let me know what is your experience. Best regards Arnold

@rcingtoys5004

2 жыл бұрын

Hi my friend! To be honest the esc is one of the cheapest ones! Something you need to know, is brushless motors on low rpm is struggling in which direction to go compared with the brushed ones. Because this is how work brushless motors. To avoid this you can buy a better esc (hobbywing maybe) and install a smaller pinion about 17 tooth. Hope i answered your question. Cheers

@6arnold1

2 жыл бұрын

@@rcingtoys5004 thank you!

@Cocothegecko

5 ай бұрын

​@@rcingtoys5004hi i buy an 150 esc for this problem and its works no more problem !

The difs will start crying soon, trust me, i destroied them with 2845 motor 3100KV. Now a have a full upgrade new difs and 3650 motor, I'll see how it will last. PS: I forgot about the CV joints, they will snap also, UPGRADE imediatly

Hi what does it require to upgrade it to brushless

@rcingtoys5004

3 жыл бұрын

Hi. You will need a brushless motor,brushless esc, 3 wire servo the small one, a new radio transmitter and new radio receiver. Usually you can find all together on Ebay or Amazon! Cheers

Sir were you buy the body post

@rcingtoys5004

2 жыл бұрын

It's the genuine one. It's just painted black!🙂

Acabe de pedir la mismita electrónica esa ya está por llegar y ya veo que se va a desbaratar mi a959-B con esa potencia descomunal😱😱😱😱😥😥😥

Good build but don't grease the pinion and spur it doesn't need it plus it attracts dirt and can grind up the gears. 👍

@rcingtoys5004

3 жыл бұрын

Thanks for advice. But I checked the gear after a few runs and I so all the grease were dissipated and then I realized that doesn't matter if has grease on the gear! Cheers😉

Literally, no one seems to have cogging issue besides me. Even cheap brushless setups I've watched on YT. 😭

@sassy_gamingttt3821

2 жыл бұрын

I have the same issue did you fix ?

I know this is old but I hope you see this. Wondering the cost here. Not really worth it if over $50 us in my opinion. Might as well just buy a better product.

Giveaway wltoys pls

Don’t use supaglu eva

You should be using better White Lithium grease not this stuff.. Your meshing of the gears sounds off.

@rcingtoys5004

3 жыл бұрын

Yea you right! I need to buy some grease!

Name your price

@rcingtoys5004

2 жыл бұрын

🙂 isn't for sale!

@lhauntedlhouse

2 жыл бұрын

@@rcingtoys5004 😂 understandable. How much did you spend on it then? Wonder if it costs more to buy it and upgrade it or buy a RTR brushless one

Why are you using super glue? They make stuff called threadlocker and 'sleeve retaining compound' specifically for keeping screws and bolts tight and the sleeve retaining compound for "gluing" gears & bearings onto shafts. Don't use super glue. 👎

@rcingtoys5004

2 жыл бұрын

I know mate.🙂 i didn't have one on that time. That car you just seen is now completely changed. Has different chassis( longer) and 17 tooth pinion. With 0.7 module. But the hole is a bit smaller but easily it can be done on 3mm. Have fun. Cheers

Super glue seriously

@rcingtoys5004

3 жыл бұрын

Is doing the job😉

@k1ortia

3 жыл бұрын

@@rcingtoys5004 Get some red thread lock mate. And do it properly next time.