I watched three of the 70v speakers tutorials. this one appears to be the most informative and detailed. Thank you

Thanks for your efforts

Thanks for this. based on the first example, if I decide to expand the system, (and I know I have the amplification to do it), can I just buy another couple speakers, change them to the same 2w tap, and add them? (and reversely if I wanted to turn off 25 of them during the winter, could I simply disconnect the connection between the 25th and 26th speaker and continue with my listening of the first 25? or would that cause problems?

Hi, Thanks for this but it has a question. In 100V system 480W(PAM-480A)., the back of Amp there are 5 terminals (sp1-----sp5) for 5 channel controls. Can we connect all the terminals together and get them as one terminal to feed all the speakers (in parallel) via one wire coming out of the amp? To prevent the overload on one channel and to reduce the wiring consumption. Thanks in advance

Hi, in 70 volts system I require a balanced 600 ohm input to amplify a fixed radio. Can use a tel input and i guess only one Master volume unless install VC's? i typically have Bogen C35 and up based upon speaker taps. thanks,

whay is that VC? is it volume control?

Sir @1:40 why is the result of 100 watts x 20% line loss equal to 1200 watts? Is there an explanation for it? Thank you

Is there any solution if I want to run 2 cables? For example if placement of speakers is too far apart where it is not practical to run the cable to one side then to the other on same "chain"?

@josephbritto547

6 жыл бұрын

How do choose an amplifier for 15 and 18 inches speakers

@nilpo

5 жыл бұрын

You don't have to chain them. You just have to have them all in parallel. All reds connect together and all blacks connect together. It doesn't matter where. Wire your speaker to the closest red and black you have. It doesn't matter if it's another speaker or a volume control.

What is 70 v wiring?

Sir how about 13 speakers connection to 2 amplifier

Would suggest using a red and black marker next time.

I have some questions

Can you connect a sub to a similar system?

@ajembafabian5175

5 күн бұрын

Yeah

@ajembafabian5175

5 күн бұрын

On one zone

The 70V is much simpler lmao. Look at all the room for error in the second demo.

Great video! But it's a little annoying he can't write the letter W 😂

If 100 watt speaker 8 ohm we connect 8 speaker in parallel then what's the ohm

@nilpo

5 жыл бұрын

This video is about 70V speaker wiring. 8-Ohm is a different animal.

@callenjw

3 жыл бұрын

2 - Ohm

😂

Your math is wrong.