Good Effort Realy HelpFull

nice information thank you so mach

good information

Thanks

Hi your video is nice, how to consider if high tension power lines are crossing our LOS path,how loses will be calculated.

@TechTricksZone

7 жыл бұрын

Dear Prakash if the high tension power line just going parallel to your Wireless Link then it will be more loss but if its only crossing in one place then its not do much loss . if between high tension line and RF link more then 1-2 meter distance then i dnt think its get more loss. just it should not to near to or cross where RF device installed .

hello frined, your video is very useful. Thanks for your efforts. further, is there any solution for finding the Height of obstacles in the line of sight?

@TechTricksZone

7 жыл бұрын

you can use Cambium link planner software and other third party software . but all will so you as per google earth data . for clearing of obstacles you just add some extra margin of height in your link. if link is short distance then possible to physically work out but for long distance you have to add extra height as per any link planer software show feasibility for safer side. because every software will take data from google earth so we can not expect 100% correct

@TechTricksZone

7 жыл бұрын

please subscribe if this channel helpful for you and for more tutorials

@doitek

6 жыл бұрын

Software already calculate extra height for that visit airlink.ubnt.com

Dear Sir...very good presentation. please tell some tools name to check Fresnel zone and feasibility. I am planning to connect my office to showroom. distance around 1Km but there is big building in middle the height of office 10 meter and showroom 15 meter. please give your suggestion. thx

@TechTricksZone

7 жыл бұрын

You an use cambium Link planner and google for more Paid and free Link Planner tools

@arvinratunilozziansitsuppl2357

6 жыл бұрын

i think less than 1KM distance doesnt need to consider the fresnel zone, its only effective when earth's curvature matters

@wirelesss.satyabhan158

6 жыл бұрын

ok for one km NLOS Solution available on the RF Link. what is bandwidth required.

Very good information . Tell us can we get hight of trees in point to point link

@TechTricksZone

5 жыл бұрын

you can calculate stander aprox size of trees to make site survey

dear thank you do you have pathloss software

Thank you

@TechTricksZone

5 жыл бұрын

Welcome . also get more informative guide at TechTrickszone.com

@SokretHeng

5 жыл бұрын

@@TechTricksZone I doing site survey point to point wireless connection distance 100 km with high building the middle of point to point, How can I do it for good signal?

For ptp if the cpe is in higher level then the bts will it be feasible. The distance is 2.5 km

@TechTricksZone

5 жыл бұрын

doent matter if its higher or lower. if line of sight is clear than point to point link can work

I need you to assist to look into this.... Here are my coordinate.. Site A: 11.5743° N, 8.3316° E Site B: 11.4826° N, 8.5125° E Both location have mast of 40 meters. Is there clear line of site??????

Great video! I need to build p2p link within 16km. Can u suggest me devices for it?

@TechTricksZone

6 жыл бұрын

Line of Sight should be clear first and . you can mail me techtricks010@gmail.com i will suggest device in mail

@ShadmanSaquib

6 жыл бұрын

TechTricks Zone hi, i sent u an email. Could u check and get back to me please?

@wirelesss.satyabhan158

6 жыл бұрын

Where you want to install for 16 km.

Although this may help in smaller links but this is not a correct way Sir.....you need to take care of Fresnel zone as well.

@TechTricksZone

7 жыл бұрын

Alright Sir, this is a basic Step for beginner you can use this for short distance and with this you can also use many third party software to calculate your Fresnel zone and feasibility .

@samcomm2010

6 жыл бұрын

Any easy way to calculate distance and height. Any software by which we can calculate distance and height of two sights.

@tekiluyewubdar4664

6 жыл бұрын

do what u want to do not only comment

DEar sir!!! I want coonect about 40 kilimomitre broadband link. Which would be best for me??

@TechTricksZone

7 жыл бұрын

40Km Wireless Connectivity will be very costly because in wireless line of sight would be must . so wireless device will be costly for long distance.

@satyabhansingh9878

6 жыл бұрын

please do share GPS Co-ordinate of both end. what is the bandwidth minimum bandwidth requirement on wireless link at remote end.

@wirelesss.satyabhan158

6 жыл бұрын

there is many option for broadband link. what is bandwidth needed.

This video should have been 20seconds long.

how did you compute for tower height?

@TechTricksZone

4 жыл бұрын

compare the both side sea lable differnece and add the building hiehgt in both side and calculate tower required

@TechTricksZone

4 жыл бұрын

try this- techtrickszone.com/2018/05/21/how-to-check-tower-height-point-to-point-in-google-earth/

How to find hight tower to insall power through Google Earth kindly guide me...

@TechTricksZone

6 жыл бұрын

you need to check both side see level height difference+both side building height difference to calculate tower height required for feasibility.

@mianadnan37

6 жыл бұрын

TechTricks Zone how to check building hieghts... Kindly gide me

@TechTricksZone

6 жыл бұрын

Calculate the buidling floor EXP- suppose buiding 3 floor than building height Aprox- 3X10= 30 Ft is the building height

@mianadnan37

6 жыл бұрын

TechTricks Zone ok...try it...

@mianadnan37

6 жыл бұрын

TechTricks Zone where are you from?

I can't deal with this lol Watching this typing is just way to tedious. Couldn't you just have narrated it or something?

@TechTricksZone

6 жыл бұрын

techtrickszone.com/2018/05/21/how-to-check-tower-height-point-to-point-in-google-earth/

Sir My name is dastagiri...from a.p.it is very useful information to me and thanks you.But I want built wireless bridge between 8km wit air grid m5 hp...with rx and tx......so point A to point B..is very esay to buit in my site. But between point A and B ...there is present two height voltage transmission lines.....can it is possible to get signal point A to B easily......could you give me your mobile number please ....

@TechTricksZone

6 жыл бұрын

High voltage Transmission line can effect throughput due to electric interference but if you give sufficient space between wireless ptp and voltage line than you can avoid most of disturbance due to electric interference

Aisi videos ki samj nahi ati jis mein bol ker bataya na gaya ho.